• 원예과학기술지
• /
• 제29권6호
• /
• pp.583-591
• /
• 2011

'Formosa' plums were picked at three maturity stages according to skin redness, treated with $1{\mu}L{\cdot}L^{-1}$ 1-MCP at $10^{\circ}C$ for 24 h and then stored for 21 days at $10^{\circ}C$. Ethylene production, respiration rate, firmness, color, TSS, TA, and ethanol concentration were determined. Total phenolic content, total flavonoid content, and antioxidant capacity were determined periodically by separating the flesh from the peel. Ethylene production and respiration rate were strongly inhibited in all stages of the 1-MCP-treated fruit, while ethylene production dramatically increased in all stages of non-treated fruit until 11 days after harvest, after which it decreased until the end of the experiment. The respiration rate of the stored fruit increased for 11 days in stages 1 and 2 and for 7 days in stage 3 and decreased after. 1-MCP-treated fruit in all stages showed delay in fruit quality changes such as firmness, TA, skin color, and ethanol concentration, but non-treated fruit did not. Total phenolic contents, total flavonoid contents and antioxidant capacity of 'Formosa' plums were not affected by 1-MCP treatment or maturity stage. However, those values were higher in the peel than in the flesh.

• Macromolecular Research
• /
• 제14권3호
• /
• pp.267-271
• /
• 2006

Polyelectrolyte complex films were prepared with two compounds, chitosan and poly(ethylene glycol)-monosuccinate, using a casting in order to synthesize a polyelectrolyte complex film with various mole ratios of chitosan and poly(ethylene glycol)-monosuccinate. The solution properties of isolated PEC were investigated for the effects of FTIR, pH value, Brookfield viscosity and cell viability assay using MTT staining. The PEC films were evaluated for mechanical properties by typical stress-strain curve, far thermal properties by DSC and TGA and for surface morphology Properties by SEM. Furthermore, the surface resistance, moisture regain and water content of the films were characterized. The solution properties were affected by several factors including the chitosan content in the PEC, the mixing ratio of PEG and chitosan, and pH. Several PEC in acidic conditions exhibited film formation under appropriate conditions of mixing ratio and chitosan concentration in the mixing process. These PEC films were found to have sufficiently flexible and stable properties due to their hydrophilic structure, which was farmed by the oppositely charged interaction between PEG-MS and chitosan matrix. The results showed the potential applicability of chitosan and poly(ethylene glycol)-monosuccinate films as a biocompatible polymer.

• 원예과학기술지
• /
• 제35권3호
• /
• pp.300-313
• /
• 2017

'Unicon' cherry tomato (Solanum lycopersicum) is one of the most highly perishable horticultural crops due to its high water content and respiration rate. This study was carried out to assess the effect of continuous application of $CO_2$ (control [air], 3%, and 5%) on the quality and shelf life of cherry tomato fruits stored at $10^{\circ}C$ and $85{\pm}5%$ relative humidity (RH) at two maturity stages (pink and red). Continuous application of $CO_2$ did not affect the soluble solids content (SSC) or titratable acidity (TA) of the fruit at either maturity stage during storage. However, there was a significant difference among treatments in terms of flesh firmness, cell wall thickness, pectin content, vitamin C content, skin color, lycopene content, weight loss, ethylene production rate, respiration rate, and acetaldehyde and ethanol production. Fruits treated with 5% $CO_2$ maintained their high quality with regards to vitamin C, skin color ($a^*$), lycopene content, weight loss, physiological parameters (ethylene production rate, respiration rate, and volatile compounds), flesh firmness, cell wall thickness, and pectin content at both maturity stages compared with 3% $CO_2$ treatment and the control. Continuous application of $CO_2$ (5%) reduced the ethylene production rate and the production of volatile compounds during storage. Therefore, cherry tomato 'Unicon' fruit can be stored for two weeks without losing fruit quality at both maturity stages under continuous application of 5% $CO_2$ as a postharvest treatment.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.424.1-424.1
• /
• 2016

태양전지 모듈의 봉지재로 사용되는 EVA(Ethylene-Vinyl acetate)는 외부의 환경으로부터 태양전지를 보호해주는 역할을 한다. 하지만 frame의 실링재나 glass edge 부분의 결함으로 인해 수분이 침투되어 모듈의 내부자재에 영향을 미치게 되며, 모듈의 효율 감소나 수명 단축의 원인이 된다. 이러한 결함을 줄이기 위해서는 EVA의 crosslinking degree, 절연 저항 특성을 향상시키는 것이 중요하다. 이에 본 연구에서는 EVA의 crosslinking degree를 보기 위해 soxhlet extraction method를 이용하여 gel content를 측정하였으며, 라미네이션 과정 중 curing time에 따른 gel content 변화를 확인하였다. 또한 이 실험을 바탕으로 gel content에 따른 절연 저항을 측정하여 EVA의 crosslinking degree에 의한 절연 저항 특성을 확인하였다.

• 생물환경조절학회지
• /
• 제15권1호
• /
• pp.78-83
• /
• 2006

The objective of this study was to examine effect of ethylene removal apparatus on fruit quality of 'Niitaka' pear (Pyrus pyrifolia) in case of a double storage of apples and pears in a storage room. Ethylene and carbon dioxide concentration were efficiently decreased by the ethylene removal apparatus. Fruit weight loss was high at double storage of apples and pears (DAP) in a storage room compared with storage of pears. Fruit core browning was $5{\sim}22.5%$ at the fruits in DAP, but as setting ethylene removal apparatus it was not occurred till 90 days after storage. Soluble solids content and fruit peel hardness were not different among the treatments. Accordingly, a double storage of apples and pears in a storage room is possible as setting ethylene removal apparatus.

• Elastomers and Composites
• /
• 제48권1호
• /
• pp.2-9
• /
• 2013

rac-$Et(Ind)_2ZrCl_2$ 메탈로센 촉매와 메틸알루미늄옥산 공촉매를 이용하여 polyethylene, poly(ethylene-co-1-decene), poly(ethylene-co-p-methylstyrene) 및 poly(ethylene-ter-1-decene-ter-p-methystyrene)를 합성하였다. $^{13}C$ NMR과 $^1H$ NMR 및 FT-IR을 이용하여 삼원공중합체의 특성을 분석하였다. 삼원공중합의 최적조건을 확립하기 위해 동일한 중합조건을 유지한 채 촉매량, 공촉매/촉매 몰비, 중합 시간 및 중합 온도를 변경하여 실험하였다. 촉매량이 증가할수록 삼원공중합체의 촉매활성도 및 중량평균분자량은 증가하였으나, 중합시간이 30분을 초과하자 촉매활성도는 감소하였다. 공촉매/촉매 몰비를 증가시킨 결과 중량평균분자량은 감소하였고, 촉매활성도는 어느 정도 증가하였다. 촉매활성도는 중합온도가 증가함에 따라 상승하였으나 중량평균 분자량은 감소하였다.

• Macromolecular Research
• /
• 제14권2호
• /
• pp.146-154
• /
• 2006

Organic and inorganic hybrid nanocomposites based on poly(ethylene 2,6-naphthalate) (PEN) and silica nanoparticles were prepared by a melt blending process. In particular, polymer nanocomposites consisting mostly of cheap conventional polyesters with very small quantities of inorganic nanoparticles are of great interest from an industrial perspective. The crystallization behavior of PEN/silica hybrid nanocomposites depended significantly on silica content and crystallization temperature. The activation energy of crystallization for PEN/silica hybrid nanocomposites was decreased by incorporating a small quantity of silica nanoparticles. Double melting behavior was observed in PEN/silica hybrid nanocomposites, and the equilibrium melting temperature decreased with increasing silica content. The fold surface free energy of PEN/silica hybrid nanocomposites decreased with increasing silica content. The work of chain folding (q) for PEN was estimated as $7.28{\times}10^{-20}J$ per molecular chain fold, while the q values for the PEN/silica 0.9 hybrid nanocomposite was $3.71{\times}10^{-20}J$, implying that the incorporation of silica nanoparticles lowers the work required to fold the polymer chains.

• Journal of Electrochemical Science and Technology
• /
• 제2권1호
• /
• pp.51-56
• /
• 2011

We develop a new nonwoven composite separator for a safer lithium-ion battery, which is based on coating of silica ($SiO_2$) colloidal particles/styrene-butadiene rubber (SBR) binder to a poly(ethylene terephthalate) (PET) nonwoven support. The $SiO_2$ particles are interconnected by the SBR binder and closely packed in the nonwoven composite separator, which thus allows for the development of unusual porous structure, i.e. highly-connected interstitial voids formed between the $SiO_2$ particles. The PET nonwoven serves as a mechanical support that contributes to suppressing thermal shrinkage of the nonwoven composite separator. The $SiO_2$/SBR content in the nonwoven composite separators plays an important role in determining their separator properties. Porous structure, air permeability, and electrolyte wettability of the nonwoven composite separators, in comparison to a commercialized polyethylene (PE) separator, are elucidated as a function of the $SiO_2$/SBR content. Based on this understanding of the nonwoven composite separators, the effect of $SiO_2$/SBR content on the electrochemical performances such as self-discharge, discharge capacity, and discharge C-rate capability of cells assembled with the nonwoven composite separators is investigated.

• 한국의류산업학회지
• /
• 제10권3호
• /
• pp.371-376
• /
• 2008

Poly(ethylene-co-vinylacetate) (EVA) microspheres were prepared by thermally induced phase separation (TIPS) in toluene. The microsphere formation occurred by the nucleation and growth mechanism in metastable region. The effects of the concentration and component of the polymer and cooling rate on microsphere formation were investigated. The microsphere formation and growth were followed by the cloud point of the optical microscope measurement. The microsphere size distribution, which was obtained by particle size analyzer, became broader when the polymer concentration was higher, the content of vinyl acetate in EVA copolymer was higher, the cooling rate of EVA copolymer solution were lower. The content of disperse dye in EVA microsphere was obtained by TGA thermal analysis, the dye content of EVA15 and EVA18 were 3.5 and 2.0 wt% respectively.

• 폴리머
• /
• 제27권2호
• /
• pp.113-119
• /
• 2003

폴리(에틸렌 테레프탈레이트) (PET)의 열처리 조건들 즉, 상대 습도, 온도 그리고 시간 등에 따라 나타나는 PET의 열적 특성과 결정화 거동에 대해서 연구하였다. PET샘플에 열처리를 수행한 후 수분 함유량, 유리 전이온도($T_g$), 그리고 결정화 온도($T_{\propto}$) 등의 변화를 조사하였다. 그리고 열처리된 PET시편에 대해서 결정화를 시키고 결정화도에 따른 열변형 온도(HDT)를 측정하였다. 또한 사출 성형으로 제작된 PET샘플의 열처리 후 잔류 응력의 완화를 편광 필름을 통하여 조사하였다. 열처리 시의 상대 습도, 온도, 그리고 시간이 증가함에 따라 PET샘플 내의 수분 함유량은 최대 6000 ppm이상 까지 증가하였다. $T_g$와 $T_c$는 시편 내에 수분 함유량이 증가할수록 감소하였다. PET샘플의 결정화도는 수분의 함유량이 증가함에 따라 증가되었다. 그러나 같은 양의 수분 함량에서 결정화도는 열처리의 조건에 따라 다르게 나타났다. PET샘플 내의 잔류응력의 완화는 열처리 조건에 따라 다르게 나타났으며, PET샘플 내에 잔류 응력이 감소할수록 최대 결정화도는 증가하였다.