• KSBB Journal
• /
• 제10권1호
• /
• pp.105-112
• /
• 1995

본 연구에서는 LB기법에 의하여 분자수준으로 고 정화된 효소를 이용하여 에탄올의 양을 측정하는 광섬유 바이오센서가 개발되 었다. ADH는 arachidic acid의 단분자막에 LB기법으로 고정화된다. 센서의 출력신호를 분석하기 위하여 고정화된 ADH의 효소 반응은 ordered multisubstrate mechanism을 이용 하여 검토되었다. 광학 측정 시스템이 제시되었으며, 센서의 출력신호는 에단올의 농도에 비례하여 증가 하며 LB막에 누적된 누적충수와 관련이 있음을 알 수 있었다. LB막의 누적된 누적충수를 20충으로 증가하면 센서의 신호출력 범위가 확장되어 45mM의 고농도 에탄올도 측정할 수 있었다. 순수지질의 단 분자막과 효소가 흡착된 지질의 단분자막의 $\pi$-Aisotherm은 중성의 subphase에서 각기 다른 전하를 띠는 세 가지 종류의 지질에 대하여 조사되었다. ADH의 흡착도가 가장 우수한 지질은 arachidic a acid이며 이는 중성의 sub phase에서 양의 전하를 띠는 ADH 분자와 읍극의 전하를 띠는 arachidic a acid 분자 사이에 작용하는 정전기력에 기인한 것이다.

• Bulletin of the Korean Chemical Society
• /
• 제31권3호
• /
• pp.615-619
• /
• 2010

A new coumarin-thiazolobenzo-crown ether based fluorogenic chemosensor BTC (1) was reported. The ion-selective binding properties of 1 with different alkali, alkaline earth metals and transitional metals were investigated in an ethanol-DMSO system. BTC (1) showed the highest binding constant toward $Hg^{2+}$ over $Ag^+$, $Pb^{2+}$ and $Cu^{2+}$.

• Bulletin of the Korean Chemical Society
• /
• 제33권9호
• /
• pp.2867-2872
• /
• 2012

SAN/$BMIPF_6$ nanofibers were fabricated by an electrospinning process and used as chemiresistors for sensing alcohol vapours. A hydrophobic and air-stable ionic liquid, $BMIPF_6$, was used to impart electrical conductivity to insulating SAN nanofibers. The effects of $BMIPF_6$ addition on the morphology of the nanofibers were explained in terms of surface tension, viscosity and conductivity. After exposing the SAN/$BMIPF_6$ nanofibers collected on an interdigitated electrode to alcohol vapours (ethanol, 1-propanol and 1-butanol), the resistance of the nanofibers decreased due to adsorption of alcohol molecules. The electrospun SAN/$BMIPF_6$ nanofibers sensor exhibited good sensitivity and reproducibility.

• 센서학회지
• /
• 제16권1호
• /
• pp.11-16
• /
• 2007

CuO is an important transition metal oxide with many practical applications such as catalysts, p-type semiconductor, solar cells, magnetic storage media and cathode materials. In this contribution, nanocrystalline CuO powders were prepared by solution reduction method using copper chloride ($CuCl_{2}{\cdot}2H_{2}O$), hydrazine ($N_{2}H_{4}$) and NaOH and subsequent heat treatment. The gas sensor using nanocrystalline CuO powders showed high sensitivities to acetone and ethanol.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.792-796
• /
• 2002

In this work, porous silicon(PS) layer is used as a sensing material to detect organic gases. To do this, PS sensors with membrane structure are fabricated. The sensors were made by applying the technologies of membrane formation by anisotropic etching of silicon, and PS layer formation by anodization in HF solution. From fabricated sensors, current-voltage (I-V) curves were measured against ethanol (called alcohol), methanol and acetone gases evaporated from 0.1 to 0.5% solution concentrations at $36^{\circ}C$. As the result, all curves showed rectifying behavior due to a diode structure between Si and PS, and the conductance of sensor devices increased largely with the organic solution concentration at high voltage of 5V.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.382-383
• /
• 2008

In this paper we presented experimental results of a gas sensor utilizing multi-walled carbon nanotube (MWNT)composites for the alcohol detection which is useful to checking drinking and driving, for example. The MWNT-composites were deposited using spray method on PES substrates suitable for use in low-cost and flexible sensors. We observed the variation of conductance from the sensors exposed to alcohol vapors evaporated at 37C equal to the human body temperature to match real condition. As the result, the conductance was decreased with the increase of ethanol vol% diluted in water. The sensors showed good sensitivity and linearity.

• 한국전기전자재료학회논문지
• /
• 제21권9호
• /
• pp.783-788
• /
• 2008

We suggest a CNT-based gas sensor for breath alcohol measurement. The sensor was composed of single-walled carbon nanotubes (SWCNTs) thin film on flexible PES (polyethersulfone) substrate, and the SWCNTs thin film was formed by multiple spray-coating with SWCNTs solution which was well-dispersed, highly controlled and functionalized in ethanol solvent. In this work, three types of SWCNTs thin films were deposited with changes in the number of spray-coatings to 20, 40 and 60 times in order to compare electrical response properties of the SWCNTs thin films. from the fabricated sensors, conductance and capacitance responses were measured and discussed. Alcohol gas sensors have been commercialized widely as gauge for breath alcohol measurement which is applicable to checking whether car drivers are drinking-driving or not. Our alcohol gas sensors showed good sensitivity and linearity even at room temperature.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.375-376
• /
• 2005

탄소나노튜브는 캔틸레버처럼 주어진 압력에 의해 elastic curve를 형성하게 되는데, 이러한 성질은 탄소나노튜브가 가지고 있는 young's modulus와 구조적인 형태에서 기인한다. 따라서 탄소나노튜브의 변위와 인가된 analyte의 농도에 따른 압력 사이의 관계를 이용해 가스센서로의 적용이 가능하다. 이 번 연구에서는 시뮬레이션을 통해 길이가 30nm 이고 반경이 1.5nm로 모델링 된 단일 벽 탄소나노튜브가 3000ppm와 1000ppm ethanol의 농도에 의해 형성된 elastic curve의 최대변위를 구하고, 농도와 단일 벽 탄소나노튜브의 elastic curve의 최대변위가 비례함을 보였다.

• 센서학회지
• /
• 제30권5호
• /
• pp.314-319
• /
• 2021

In this study, biomarkers were analyzed and segmented using tunable infrared gas sensors after performing the principal component analysis. The free spectral range of the device under test (DUT) was around 30 nm and DUT-5580 yielded the highest output voltage property among the others. The biomarkers (isoprophyl alcohol, ethanol, methanol, and acetone solutions) were sequentially mixed with deionized water and their mists were carried into the gas chamber using high-purity nitrogen gas. A total of 17 different mixed gases were tested with three tunable infrared gas sensors, namely DUT-3144, DUT-5580, and DUT-8010. DUT-8010 resolved the infrared absorption spectra of whole mixed gases. Based on the principal component analysis with each DUT and their combinations, each mixed gas and the trends in increasing gas concentration could be well analyzed when the contributions of the eigenvalues of the first and second were higher than 70% and 10%, respectively, and their sum was greater than 90%.

• 센서학회지
• /
• 제28권4호
• /
• pp.231-235
• /
• 2019

We investigated the facile and effective strategy for sensitive and selective $C_2H_5OH$ sensors based on the In-decorated NiO nanoigloos. The In-decorated NiO nanoigloos is fabricated by RF sputtering using 750 nm-diameter polystyrene beads using a soft-template. The morphological evolution based on the Van der Drift model was generated through a heterojunction between In metal and NiO, resulting in a pyramidal rough surface. Upon decorating the In on the NiO surface, high sensitivity and selectivity to $C_2H_5OH$ were observed, and gas sensing mechanism was demonstrated by a high surface-to-volume and double Schottky barrier. We are confident that the method presented in this study will have a significant impact on the fabrication of effective nanostructures and their application for the gas sensors.