• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1485-1488
• /
• 1997

The capacity of memory chip has increased vert quickly and 64MDRAM becomes main product in semiconductor manufacturing lines consists of many sequential processes, including etching process. although it needs direct sensing of wafer state for the accurae detching, it depends on indirect esnsing and sample test because of the complexity of the plasma etching. This equipment receives the inner light of etch chamber through the viewport and convets it to the voltage inetnsity. In this paper, EDP voltage signal has a new role to detect etching failure. First, we gathered data(EPD sigal, etching time and etchrate) and then analyzed the relationships between the signal variatin and the etch rate using two neural network modeling. These methods enable to predict whether ething state is good or not per wafer. For experiments, it is used High Density Inductive coupled Plasma(HDICP) ethcing equipment. Experiments and results proved to be abled to determine the etching state of wafer on-line and analyze the causes by modeling and EPD signal data.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.385-385
• /
• 2010

In this work, we have investigated the etching characteristics of $TiO_2$ and selectivity of $TiO_2$ over $SiO_2$ thin films as resistance in ReRAM using the inductively coupled plasma. The etch rate and selectivity were measured by varying the $BCl_3$ addition into Ar plasma. The maximum etchrate was obtained at 110.1nm/min at $BCl_3$/Ar=5sccm/10sccm, 500W for RFpower, -100v for DC-bias voltage, and 2Pa for the process pressure. The etched $TiO_2$ surface was investigated with X-ray photo electron spectroscopy. We explained the etching mechanism in two etch mechanisms, physiclas puttering and chemical reaction.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.244-244
• /
• 1999

Liquid Crystal Displays(LCDs) 투명성 전도막으로 사용하는 Indium Tin Oxide (ITO)의 고밀도 식각특성을 조사하였다. 특히 ITO식각의 경우, pixel electrode 전극에서 사용되는 underlayer인 SiO2, Si3N4와의 최적의 선택비를 얻는데 중점을 두고 있다. 따라서 본 실험에서는 Inductively Coupled Plasma(ICP)를 이용하여 source power, gas combination, bias voltage, pressure 및 기판온도에 따른 ITO의 식각 특성과 이의 underlayer인 SiO2, Si3N4와의 선택비를 조사하였다. Ar과 CH4를 주된 식각가스로서 사용하였으며 첨가가스로는 O2와 HBr를 사용하였다. ITO의 식각특성을 이해하기 위하여 Quadruple Mass Spectrometry(QMS), Optical emission spectroscopy(OES) 이용하였으며, 식각된 sample의 잔류물을 조사하기 위하여 X-ray photoelectron spectroscopy(XPS)를 이용하여 분석하였다. Ar gas에 적정량의 CH4 혼합이 순수한 Ar 가스로 식각한 경우에 비하여 ITO와 SiO2, Si3N4의 선택비가 높았으며, 더 높은 식각 선택비를 얻기 위하여 Ar/CH 분위기에서 첨가가스 O2, HBr을 사용하였다. Source power 및 bias 증가에 따라 ITO의 식각률은 증가하나, underlayer와의 선택비는 감소함을 보였다. 본 실험에서 측정된 ITO의 high 식각률은 약 1500$\AA$/min이며, SiO2, Si3N4와의 high selectivity는 각각 7:1, 12:1로 나타났다. ITO의 etchrate 및 선택비는 source power, bias, pressure, CH 가스첨가에 의존하였지만 기판온도에는 큰 변화가 없음을 관찰하였다. 또한 적정량의 가스조합으로 식각된 시편의 잔류물을 줄일 수 있었다.

• Korean Journal of Materials Research
• /
• v.28 no.12
• /
• pp.709-713
• /
• 2018

To improve the etch rate of $Si_3N_4$ thin film, $H_2SiF_6$ is added to increase etching rate by more than two times. $SiO_3H_2$ is gradually added to obtain a selectivity of 170: 1 at 600 ppm. Moreover, when $SiO_3H_2$ is added, the etching rate of the $SiO_2$ thin film increases in proportion to the radius of the wafer. In $Si_3N_4$ thin film, there is no difference in the etching rate according to the position. However, in the $SiO_2$ thin film, the etching rate increases in proportion to the radius. At the center of the wafer, the re-growth phenomenon is confirmed at a specific concentration or above. The difference in etch rates of $SiO_2$ thin films and the reason for regrowth at these positions are interpreted as the result of the flow rate of the chemical solution replaced with fresh solution.