• Korean Journal of Clinical Laboratory Science
• /
• v.52 no.2
• /
• pp.158-163
• /
• 2020

This study examines and presents reasonable improvement measures for the operation and revision of the relative value scoring system, and the basis for performance of a medical technologist. Seven hospitals were enrolled in the study, and included 5 resident laboratory medicine specialists and 53 medical technologists, giving a ratio of 10.6 technologists per laboratory medicine specialist. The average of professional manpower scores was 18, and the average of each medical institution's total score was 78. Ratings and additional rates were in the range 2~3%, and quality-added ratios were 2~3%, with no significance. Excluding pathological testing and assessing physiological functions, the average number of diagnostic tests for health insurance claims were 9,618,062, including 4,378,146 points for 5% of the total relative value scores. According to the DEA, the appropriate number of medical technologist is one person per 49,974 points of relative value. In conclusion, our study results indicate that it would be desirable to set the appropriate workforce for medical technologist to one person per 50,000 points of relative value. Our data could be used as a basis for enhancing productivity of the workforce and balancing health care resources.

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.4
• /
• pp.105-113
• /
• 2016

Fire radiative power(FRP), which means the power radiated from wildfire, is used to estimate fire emissions. Currently, the geostationary satellites of East Asia do not provide official FRP products yet, whereas the American and European geostationary satellites are providing near-real-time FRP products for Europe, Africa and America. This paper describes the first retrieval of Himawari-8 FRP using the mid-infrared radiance method and shows the comparisons with MODIS FRP for Sumatra, Indonesia. Land surface emissivity, an essential parameter for mid-infrared radiance method, was calculated using NDVI(normalized difference vegetation index) and FVC(fraction of vegetation coverage) according to land cover types. Also, the sensor coefficient for Himawari-8(a = 3.11) was derived through optimization experiments. The mean absolute percentage difference was about 20%, which can be interpreted as a favourable performance similar to the validation statistics of the American and European satellites. The retrieval accuracies of Himawari FRP were rarely influenced by land cover types or solar zenith angle, but parts of the pixels showed somewhat low accuracies according to the fire size and viewing zenith angle. This study will contribute to estimation of wildfire emissions and can be a reference for the FRP retrieval of current and forthcoming geostationary satellites in East Asia.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.11
• /
• pp.779-789
• /
• 2014

Cognitive radio (CR) technology based on geo-location database access approach and/or wideband spectrum sensing approach is absolutely vital in order to recognize available frequency bands in white spaces (WSs), and efficiently utilize shared spectrums. This paper presents a new structure for the TVWS database access protocol implementation based on Internet Engineering Task Force (IETF) Protocol to Access WS database (PAWS). A wideband compressive spectrum sensing (WCSS) scheme using a modulated wideband converter is also proposed for the TVWS utilization. The developed database access protocol technology which is adopted in both the TV band device (TVBD) and the TVWS database operates well in the TV frequency bands. The proposed WCSS shows a stable performance in false alarm probability irrespective of noise variance estimation error as well as provides signal detection probabilities greater than 95%. This paper also investigates Federal Communications Commision (FCC) regulatory requirements of TVWS database as well as European Telecommunications Standards Institute (ETSI) policy related to TVWS database. A standardized protocol to achieve interoperability among multiple TVBDs and TVWS databases, which is currently prepared in the IETF, is discussed.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.1
• /
• pp.117-124
• /
• 2015

Recently an opportunistic incremental relaying (OIR) system has been studied for improving the performance degradation in fading channel. However there are few studies on power control in the system, and the studies are assumed perfect knowledge of the all channels at transmitters. The assumption that the source know all channel information is difficult in practical channels. Therefore, in this paper we assume that the source knows partial channel information and propose a modified truncated channel inversion (TCI) power control scheme for the OIR system. We derive the channel capacity of the proposed system and perform Monte Carlo simulation. It is noticed that the proposed OIR system has better capacity than that of the power controlled system with direct path only, and the capacity increases with the number of relays. The power controlled OIR system gained more capacity of 29.7%, 32.7%, and 33.5% than that of the system with direct path only for the number of relays of 1, 3, and 5, respectively. The results from this paper can be applied to the estimation of a theoretical capacity for the currently operating cellular systems when they adopt the IOR system.

• Korean Journal of Remote Sensing
• /
• v.35 no.6_3
• /
• pp.1197-1208
• /
• 2019

Wildfire is a major natural disaster affecting socioeconomics and ecology. Remote sensing data have been widely used to estimate the wildfire danger with an advantage of higher spatial resolution. Among the several wildfire related indices using remote sensing data, Temperature Vegetation Dryness Index (TVDI) assesses wildfire danger based on both Normalized Difference Vegetation Index (NDVI) and Land Surface Temperature (LST). Although TVDI has physical advantages by considering both weather and vegetation condition, previous studies have shown TVDI does not performed well compare to other wildfire related indices over the Korean Peninsula. In this study we have attempted multiple modification to improve TVDI performance over the study region. In-situ measured air temperature was employed to increase accuracy, regression line was generated using monthly data to include seasonal effect, and TVDI was calculated at each province level to consider vegetation type and local climate. The modified TVDI calculation method was evaluated in wildfire cases and showed significant improvement in wildfire danger estimation.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.2
• /
• pp.138-148
• /
• 2001

Digital Video (DV) coding standards for digital video cassette recorder are based mainly on DCT and variable length coding. DV has low hardware complexity but high compressed bit rate of about 26 Mb/s. Thus, it is necessary to encode video with low complex video coding at the studios and then transcode compressed video into MPEG-2 for video-on-demand system. Because these coding methods exploit DCT, transcoding in the DCT domain can reduce computational complexity by excluding duplicated procedures. In transcoding DV into MPEC-2 intra coding, multiplying matrix by transformed data is used for 4:1:1-to-4:2:2 chroma format conversion and the conversion from 2-4-8 to 8-8 DCT mode, and therefore enables parallel processing. Variance of sub block for MPEG-2 rate control is computed completely in the DCT domain. These are verified through experiments. We estimate motion hierarchically using DCT coefficients for transcoding into MPEG-2 inter coding. First, we estimate motion of a macro block (MB) only with 4 DC values of 4 sub blocks and then estimate motion with 16-point MB using IDCT of 2$\times$2 low frequencies in each sub block, and finish estimation at a sub pixel as the fifth step. ME with overlapped search range shows better PSNR performance than ME without overlapping.

• International Journal of Highway Engineering
• /
• v.11 no.2
• /
• pp.99-109
• /
• 2009

Fine-size exposed aggregate portland cement concrete pavements (FEACP) have surface texture of exposed aggregate by removing upper 2$\sim$3mm mortar of surface of which curing is delayed by using delay-setting agent. FEACPs have advantages of maintaining low-noise and adequate skid-resistance level during the performance period than general portland cement concrete pavements. It is necessary to ensure the durability environmental loading to prevent unexpected distress during the service life of FEACP. In the process of curing, volume change accompanied change in by moisture and temperature could be an important cause of crack in concrete to construct for successful FEACP, The use of chloride containing deicer may accelerate defects of concrete pavement, such as crack and scaling. This study aim to evaluate environmental loading resistance of FEACP, based on the estimation of shrinkage-crack-control-capability by moisture evaporation and scaling by deicer in freeze-thaw reaction.

• Journal of the Korea Concrete Institute
• /
• v.16 no.5 s.83
• /
• pp.621-626
• /
• 2004

The use of blast-furnace slag (BFS) in making not only normal concrete but also high-performance concrete has several advantages with respect to workability, long-term strength and durability. However, slag concrete tends to show more shrinkage than normal concrete, especially autogenous shrinkage. High autogenous shrinkage would result in severe cracking if they are not controlled properly. Therefore, in order to minimize the shrinkage stress and to ensure the service life of concrete structures, the autogenous shrinkage behavior of concrete containing BFS should be understood. In this study, small prisms made of concrete with water-binder (cement+BFS) ratio (W/B) ranging from 0.27 to 0.42 and BFS replacement level of $0\%$, $30\%$, and $50\%$, were prepared to measure the autogenous shrinkage. Based on the test results, thereafter, material constants in autogenous shrinkage prediction model were determined. In particular, an effective autogenous shrinkage defined as the shrinkage that contributes to the stress development was introduced. Moreover, an estimation formula of the 28-day effective autogenous shrinkage was proposed by considering various W/B's. Test results showed that autogenous shrinkage increased with replacement level of BFS at the same W/B. Interestingly, the increase of autogenous shrinkage is dependent on the W/B at the same content of BFS; the lower W/B, the smaller increasing rate. In concluding, it is necessary to use the combination of other mineral admixtures such as shrinkage reducing admixture or to perform sufficient moisture curing on the construction site in order to reduce the autogenous shrinkage of BFS concrete.

• Korean Journal of Poultry Science
• /
• v.27 no.1
• /
• pp.51-61
• /
• 2000

This study was conducted to estimate the general production performance, heritabilities, and genetic phenotypic correlations on several economic traits by multiple trait animal model in Korean native chicken. The data were collected from the records of 5,192 pullets produced from 2,029 dams and 250 sires in Daejon Branch, National Livestock Research Institute from April 10. 1994 to February 10. 1997. Body weights of Red Brown (RB), Yellow Brown (YB), Grey Brown (GB) and Black (B) strains were 1,649.9, 1,439.6, 1,455.6 and 1,575.3g at age of 150 days and 1,923.5, 1,689.6, 1,812.4 and 1,924.0g at age of 270 days, respectively. The ranges of coefficient of variation for body weight were 11.52 to 14.02 at age of 150 days and 12.82 to 14.59% at age of 270 days, respectively. The first eggs of RB, YB, GB and B strains were produced at 147.4, 146.5, 151.1 and 152.1 days, respectively and the coefficients of variation were 7.80 to 8.41%. Egg weight at 270 days were 49.7, 47.6, 48.8 and 48.7 g for RB, YB, GB nd B strains, and coefficients of variation were 6.99 to 7.94% . The number of eggs at age of 270days were 75.8, 78.0, 76.7 and 68.8 for RB, YB, GB and B strains, respectively, and coefficient of variations were 23.87 to 29.89%. On heritability estimates in RB, YB, GB and strains body weight were 0.40, 0.10, 0.09 and 0.57 for RB, YB, GB and B strains at age of 150 days, and 0.23, 0.09, 0.38 and 0.24 at age of 270 days were 0.39, 0.47, 0.60 and 0.62, and egg weights at 270 days and age at 1st egg were 0.36, 0.12, 0.38 and 0.26, number of egg production at 270 days were 0.44, 0.36, 0.58 and 0.49, respectively. The genetic correlation coefficients of body weight with the age of first egg, egg weight and number of egg production at 270days were -0.07∼0.67, -0.24∼0.70 and 0.12∼0.41, respectively ; age of first egg with number of egg production at 270days and egg weight were -0.75∼0.91 and 0.34∼0.97 ; and egg weight with number of egg production at 270days were 0.18∼0.68. The phenotypic correlation coefficients of body weight with at age of first egg, egg weight and number of egg production at 270days were -0.01∼0.74, -0.04∼0.72 and 0.25∼0.57 ; age of first egg with number of egg production at 270days and egg weight were 0.26∼0.52 and 0.52∼0.92, respectively ; and egg weight with number of egg production at 270days were 0.34∼0.91.

• Tunnel and Underground Space
• /
• v.10 no.4
• /
• pp.526-532
• /
• 2000

The uniaxial compressive strength of rock mass is known as the major factor in the assessment of drillability and the optimum excavation design in full-face tunnel excavation by TBM. Referring to worldwide cases, TBM has been applied mostly to the rock mass within the strength range of 80~250 MPa. Recently, a water way tunnel has been constructed as a part of Milyang dam project by TBM within the rock masses where the rock type is mainly granite with some granophyre, hornfels and andesite. Their uniaxial compressive strengths in extended area are estimated higher than 260 MPa. In this paper, the relation between the penetration rate and the rock mass properties is analyzed and TBM application to the very hard rocks is discussed. As a result that three suggestions to predict the TBM net penetration rate are analyzed, NTH method seems a better approach than other methods in the extremely hard rocks. NTH prediction matches with the results of actual values with the variations of 2~20%. Hardness measurement by Schmidt hammer and RMR estimation are carried out along the L = 5.3 km entire TBM tunnel alignment. The net penetration rate measured monthly is shown to be reciprocally proportional to Schmidt rebound hardness and RMR where coefficients of correlation, $R^2$are 0.705 and 0.777 respectively. As a result, they are good quantitative indices for the prediction of TBM net penetration rate in the extremely hard rocks. Magnitude of in-situ stress has a certain effect on TBM performance, and it is required to measure the in-situ stresses in TBM excavation design.