• 한국도로학회논문집
• /
• 제16권3호
• /
• pp.119-129
• /
• 2014

PURPOSES : This investigational survey is to observe a proper spatial aggregation method for path travel time estimation using the hi-pass DSRC system. METHODS : The links which connect the nodes of section detectors location are used for path travel time estimation traditionally. It makes some problem such as increasing accumulation errors and processing times. In this background, the new links composition methods for spatial aggregation are considered by using some types of nodes as IC, JC, RSE combination. Path travel times estimated by new aggregation methods are compared with PBM travel times by MAE, MAPE and statistical hypothesis tests. RESULTS : The results of minimum sample size and missing rate for 5 minutes aggregation interval are satisfied except for JC link path travel time in Seoul TG~Kuemho JC. Thus, it was additionally observed for minimum sample size satisfaction. In 15, 30 minutes and 1 hour aggregation intervals, all conditions are satisfied by the minimum sample size criteria. For accuracy test and statistical hypothesis test, it has been proved that RSE, Conzone, IC, JC links have equivalent errors and statistical characteristics. CONCLUSIONS : There are some errors between the PBM and the LBM methods that come from dropping vehicles by rest areas. Consequently, this survey result means each of links compositions are available for the estimation of path travel time when PBM vehicles are missed.

• 전기전자학회논문지
• /
• 제20권3호
• /
• pp.273-278
• /
• 2016

HEVC 가변 블록 크기 움직임 추정 기법에서는 동일 탐색 영역의 데이터가 블록 크기 별로 중복 사용되어 탐색 영역 데이터의 사용량이 많고 조기중단 기법의 적용이 어렵다는 문제점이 있다. 본 논문에서는 최상위 블록 크기 PU를 탐색의 기준으로 두어, 최상위 블록 크기 PU의 탐색과 동일 지점에서의 하위 블록 크기 PU의 탐색을 동시에 진행하여 메모리 대역폭을 줄였고, 최상위 블록 크기 PU의 연산 결과값을 재사용하여 연산량 또한 줄였다. 조기중단 기법을 적용했을 때 또한 최상위 블록 크기 PU를 기준으로 판별하면 하위 블록 크기 PU의 위치에 따라 탐색 기회가 고르게 반영되지 않아 화질의 저하로 이어질 수 있으므로 이를 방지하기 위해 조기중단 기법의 적용 순서를 최상위 블록 크기 PU 내의 최하위 블록 크기 PU를 기준으로 위아래로 번갈아 수행하도록 변형하였다. 설계된 ME 엔진은 Verilog HDL로 기술하고 0.18um 공정에서 합성 및 검증하였으며, 하드웨어 크기는 36,101 게이트이고 최대 동작 속도는 263.15 MHz이다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.630-635
• /
• 2002

This work is concerned with the damage size estimation by using propagating bending wave signals in a beam. For the accurate estimation, we apply the continuous wavelet transforms to the incident waves and the reflected waves from a small damage in a long cylindrical beam. In particular, we propose to use the ratio of the magnitude of the incident and reflected waves along the ridges in the wavelet-transformed time-frequency plane. This technique is applied to the signals measured by non-contact magnetostrictive sensors. Experimental results indicate that the present method using the magnetostrictive sensor can be quite effective for accurate damage size estimation with simple measurements.

• 한국멀티미디어학회논문지
• /
• 제20권2호
• /
• pp.344-351
• /
• 2017

In this paper, we propose the obstacle database management module for obstacle estimation and clustering. The proposed G-eye manager system can create customized walking route for blind people using the UI manager and verify the coordinates of the path. Especially, G-eye management system designed a regional information module. The regional information module can improve the loading speed of the obstacle data by classifying the local information by clustering the coordinates of the obstacle. In this paper, we evaluate the reliability of the walking route generated from the obstacle map. We obtain the coordinate value of the path avoiding the virtual obstacle from the proposed system and analyze the error rate of the path avoiding the obstacle according to the size of the obstacle. And we analyze the correlation between obstacle size and route by classifying virtual obstacles into sizes.

• 한국IT서비스학회지
• /
• 제16권2호
• /
• pp.45-60
• /
• 2017

The study suggests a contract model of application operation through case study of A bank's IT outsourcing application contract based on workload. The IT outsourcing order form has a problem in that the scope of work is ambiguous due to the integration of operation and maintenance. In this study, application operation and maintenance were separated by referring to application operation history provided in ISO/IEC15504-5 standard. The scope of the IT outsourcing service was clarified by organizing the definition and detail activities of the application operation business. Application operation contract method has generally applied estimation method by the number of input manpower and period by agreement between buyer and client. As there is no activity to calculate the number of input manpower based on the operational work history and based on the standard workload per activity. In this case is not guaranteed due to the simple agreement between the contractors. In this paper, we propose an application operating cost estimation model that measures the size of the operating software using function point analysis that is the basis of application operation tasks. In order to verify the validity of the application operation cost model, we verified the correlation between the application size and the labor cost through regression analysis using SPSS.

• 상하수도학회지
• /
• 제22권1호
• /
• pp.159-168
• /
• 2008

A special field experiment has been carried out from March 2001 to June 2001 at the Changhowon in Kyunggi to investigate a better methodology for the estimation of dry deposition of pollutions applicable in Korea. In this study, dry deposition plate was used to measure of total and water soluble acidic mass fluxes, and CPRI(Coarse Particle Rotary Impactor), CI(Cascade Impactor) were also used to measure ambient concentrations in various particle size ranges. Sehmel-Hodgson model was used to estimate dry depostion velocity and Weibull probability distribution function was applied to get generalized particle size distribution for the size fractioned concentration data sampled by CPRI and CI. Atmospheric dry deposition fluxes of mass and ionic matters estimated by the various techniques(one-step, multi-step, equi-concentration, subdivision for only the coarse particle range, applying Weibull distribution function, etc.) were compared to flux data sampled by DDP. It was found out that the deposition fluxes estimation methodology calculated by the each particle size range devided by particle size distribution characteristics and the rapidly changed points of deposition velocity using Weibull probability distribution function was the most applicable.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제26권1호
• /
• pp.1-7
• /
• 2021

Air-water interfacial area is of great importance for the analysis of contaminant mass transfer processes occurring in the soil systems. Capillary bundle model has been proposed to estimate the specific air-water interfacial areas in unsaturated soils. In this study, the measured air-water interfacial areas of a soil (loam) using the gaseous interfacial tracer technique were compared to those from capillary bundle model. The measured values converged to the specific solid surface area (7.6×104 ㎠/㎤) of the soil. However, the simulated air-water interfacial areas based on the capillary bundle model deviated significantly from those measured. The simulated values were substantially over-estimated at low end of the water content range, whereas the model under-estimated the air-water interfacial area for the most of the water content range. This under-estimation is considered to be caused by the nature of the capillary bundle model that replaces the soil pores with a bundle of glass capillaries and thus no surface roughness at the inner surface of the capillaries is taken into account for the estimation of the air-water interfacial area with the capillary bundle model. Subsequently, appropriate correction is necessary for the capillary bundle model to estimate the air-water interfacial area in soils. Since the soil-moisture release curve data is the basis of the capillary bundle model, the model can be of use due to its simplicity, while the gaseous tracer technique requires complicated experimental equipment followed by moment analysis of the breakthrough curves. The size distribution profile of the pores filled with gas estimated by the water retention curve was found to be similar to that of particle size at different size range. The shifted distribution of gas-filled pores toward smaller size side compared to the particle size distribution was also found.

• 한국전자거래학회지
• /
• 제6권2호
• /
• pp.143-157
• /
• 2001

There has been a need for predicting development efforts and costs of the system during the early stage of the software process and hundreds of metrics have been proposed for computer software, but not all provide practical support to the software engineer. Some demand measurement that is too complex, others are so esoteric that few real-world professionals have any hope of understanding them, and others violate the basic intuitive notions of what high-quality software really is. It is worthwhile that metrics should be tailored to best accommodate specific products and processes after grasping their good and no good point. This paper describes two size estimation techniques, the Karner technique and the Marchesi technique, and compares and analyzes them with proposed evaluation criteria. Both techniques are to estimate software size analyzed by use case that is mainly described during the object-oriented analysis phase. We also present an empirical comparison of them, both are applied in the Internet Medicine Prescription System. We also propose some guidance for experiments based on our analysis. We believe that it should be facilitating project management more effective by adjusting software metrics properly.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.69.2-69
• /
• 2002

Process measurements contain random and gross errors and the size estimation of gross errors is required for production accounting. Mixed integer programming technique had been applied to identify and estimate the gross errors simultaneously. However, the compensate model based on mixed integer programming used all measured variables or spanning tree as gross error candidates. This makes gross error estimation problem combinatorial or computationally expensive. Mixed integer programming with test statistics is proposed for computationally inexpensive gross error identification /estimation. The gross error candidates are identified by measurement test and the set of gross error candidates are...

• 한국음향학회지
• /
• 제35권1호
• /
• pp.55-62
• /
• 2016

LMF(Least Mean Fourth) 알고리즘은 특히 비정규 잡음 상황에서 빠른 수렴성을 나타낼 뿐만 아니라 추정 오차도 낮은 것으로 잘 알려져 있다. 최근 LMS(Least Mean Square) 알고리즘 분야에서는 가변 스텝 크기를 적용한 알고리즘들에 대한 관심이 증대되어 왔다. 그 이유는 가변 스텝 크기 LMS가 다양한 환경에서 고정 스텝 크기 LMS보다 우수한 결과를 내기 때문이다. 본 논문에선 LMF에 대한 가변 스텝 크기의 한 방법으로 대수학적 스텝 크기를 사용하는 가변 스텝 크기 LMF 알고리즘을 제안한다. 제안된 방법은 가변 스텝 크기 LMS와 마찬가지로 고정 스텝 크기 LMF보다 우수할 것이 예상된다. 본 논문은 그 우수성을 시불변 채널과 시변 채널 각각의 채널 환경하에서 시뮬레이션을 통하여 보인다.