• Journal of the Korean Statistical Society
• /
• 제34권4호
• /
• pp.345-366
• /
• 2005

This paper considers the cointegrating vector estimator in the error correction model with stationary covariates, which combines the stationary vector autoregressive model and the nonstationary error correction model. The cointegrating vector estimator is shown to follow the locally asymptotically mixed normal distribution. The variance of the estimator depends on the co­variate effect of stationary regressors, and the asymptotic efficiency improves as the magnitude of the covariate effect increases. An economic application of the money demand equation is provided.

• Journal of applied mathematics & informatics
• /
• 제5권3호
• /
• pp.735-748
• /
• 1998

We analyze the error in the p version of the of the finite element method when the effect of the quadrature error is taken in the load vector. We briefly study some results on the $H^{1}$ norm error and present some new results for the error in the $L^{2}$ norm. We inves-tigate the quadrature error due to the numerical integration of the right hand side We present theoretical and computational examples showing the sharpness of our results.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.195-198
• /
• 1997

This paper proposes the effective compensation method of the rotor time constant of induction motor. An indirect vector control method is highly dependent on the motor parameters. To solve the problem of performance degradation due to parameter variation in an indirect vector control of induction motor, we compensate the rotor time constant by current error feedback. The proposed method is a simple on-line rotor time constant compensation method using the information from terminal voltages and currents. As the current error, difference between current command and estimated current, approaches to zero, the value of rotor time constant in an indirect vector controller follows the real value of induction motor. This scheme is valid transient region as well as steady state region regardless of low or high speed. This method is verified by computer simulation. For this, we constructed the simulation model of induction motor, indirect vector controller and current regulated PWM (CRPWM) voltage source inverter (VSI) using SIMULINK in MATLAB.

• 소성∙가공
• /
• 제24권1호
• /
• pp.28-36
• /
• 2015

After a short review of the iterative optimal blank method, a new method of measuring the shape error for stamped parts with 3D contour lines, which is an essential component of the optimal blank design, is proposed. When the contour line of the target shape does not exist in a plane, but exists in 3D space, especially when the shape of the target contour line is very complicated as in the real automotive parts, then the measurement of the shape error is critical. In the current study, a method of shape error measurement based on the minimum distance is suggested as an evolution of the radius vector method. With the proposed method, the optimal blank shapes of real automotive parts were found and compared to the results of the radius vector method. From the current investigation the new method is found to resolve the issues with the radius vector method.

• 정보처리학회논문지D
• /
• 제14D권7호
• /
• pp.801-808
• /
• 2007

MPEG-2, MPEG-4, H.263, H.264 와 같은 부호화 표준은 비디오 영상을 압축하여 대역폭이 제한된 유/무선 통신 시스템을 통하여 전송한다. 통신 시스템에서 고압축률의 비트스트림은 채널 잡음 (channel noise)에 민감하여, 채널 잡음으로 인한 오류가 발생하기 쉽다. 이러한 오류는 수신부에서 디코딩할 때 비디오 영상을 심각하게 왜곡시키게 된다. 본 논문에서는 수신부 단에서 오류를 복원하는 기법 (decoder error concealment) 중 손상된 움직임벡터를 복원하는 기법을 제안한다. 본 논문에서는 손실된 움직임벡터를 예측하기 위하여 인접 블록들의 움직임 벡터를, 예측필터의 일종인 칼만 필터의 입력 치로 사용하여, 손실된 움직임벡터의 최적 예상치를 만들어 손상된 움직임벡터를 복구하게 된다. H.264 비디오 코딩을 적용한 표준 테스트 영상에 대하여, 손실된 MVD (motion vector difference) 값을 0 으로 대체한 뒤, H.264 비디오 코딩에서 사용하고 있는 기본 움직임벡터 예측만을 사용한 경우와 본 논문에서 제안한 칼만 필터를 사용한 복원기법을 비교하였으며, 복원된 움직 임벡터와 원래 움직임벡터 값과의 차이를 나타내는 오차율을 비교한 결과 제안된 기법의 오차율이 평균 0.91 - 1.12 정도의 정확도가 향상된 것을 확인할 수 있다.

• Journal of Positioning, Navigation, and Timing
• /
• 제9권3호
• /
• pp.207-214
• /
• 2020

In this paper, we implement linear-quadratic-Gaussian based vector tracking loop (LQG-VTL) instead of conventional extended Kalman filter based vector tracking loop (EKF-VTL). The LQG-VTL can improve the performance compared to the EKF-VTL by generating optimal control input at a specific performance index. Performance analysis is conducted through two factors, frequency thermal noise and frequency dynamic stress error, which determine total frequency tracking error. We derive the thermal noise and the dynamic stress error formula in the LQG-VTL. From frequency tracking error analysis, we can determine control gain matrix in the LQG controller and show that the frequency tracking error of the LQG-VTL is lower than that of the EKF-VTL in all C/N0 ranges. The simulation results show that the LQG-VTL improves performance by 30% in Doppler tracking, so the LQG-VTL can extend pre-integration time longer and track weaker signals than the EKF-VTL. Therefore, the LQG-VTL algorithm is more robust than the EKF-VTL in weak signal environments.

• 한국콘텐츠학회논문지
• /
• 제6권2호
• /
• pp.65-74
• /
• 2006

MPEG-2 비디오 압축열은 복잡한 부호화 알고리즘을 이용하여 압축하기 때문에 전송 오류에 매우 민감하다. 만약 패킷을 잃어버리거나 수신된 패킷에 오류가 있으면 현재 화면에 화질저하가 발생할 뿐만 아니라 화면수가 제한적이긴 하지만 뒤이어서 재생되는 화면에도 오류가 전파된다. 따라서 이런 전송오류의 영향을 막거나 최소화 하기위해서 다양한 오류 강인 부호화/복호화를 적용한다. 대표적인 오류 강인 방법이 오류 은폐 기법이다. 오류 은폐 기법은 손상된 비디오 데이터를 은폐하기 위해서 정상적으로 수신된 데이터의 공간적, 시간적 중복성을 이용한다. 손상된 데이터를 복원하기 위해 움직임 벡터를 추정하고 움직임 보상하는 것은 좋은 방법이다. 이 논문에서는 다양한 움직임 벡터 복원 방법에 기반한 오류 은폐 기법을 제안하고 일반적인 방법들과 성능을 비교한다.

• 제어로봇시스템학회논문지
• /
• 제9권10호
• /
• pp.774-781
• /
• 2003

The important factors that cause position error in X-Y robot are inertial force, frictions and spring distortion in screw or coupling. We have to estimate these factors precisely to correct position errors, Which is very difficult. In this paper, we makes systems to inspect metal stencil which is used to print solder paste on pads of SMD of PCB with low precision X-Y robot and vision system. To correct position error that is caused by low precision X-Y robot, we defines position error vector that is formed with position of objects that exist in reference and camera image. We apply MHT(Modified Hough Transformation) for the aim of determining the dominant position error vector. We modify reference image using extracted dominant position error vector and obtain reference image that is the same with camera image. Effectiveness and performance of this method are verified by simulation and experiment.

• 전력전자학회논문지
• /
• 제27권6호
• /
• pp.481-488
• /
• 2022

This study proposes compensation methods for the initial position error and torque ripple in vector control of two-phase hybrid stepping motors. Stepping motors have an asymmetrical structure due to misalignment, such as the eccentricity generated by the manufacturing and assembly process. When vector control is applied using the position information measured by an incremental encoder attached to the rotor shaft of such stepping motors, the following problems occur. First, an initial position error occurs during the forced excitation process for the initial rotor position alignment. Second, torque ripple corresponding to the mechanical rotation frequency is generated. In this study, these non-ideal phenomena that occur in vector control of the stepping motor are analyzed, and compensation methods are proposed to eliminate them. The validity of the proposed initial position error and torque ripple compensation methods is verified through experiments on a two-phase hybrid stepping motor drive system.

• IEIE Transactions on Smart Processing and Computing
• /
• 제4권1호
• /
• pp.16-21
• /
• 2015

Most video services are transmitted in wireless networks. In a network environment, a packet of video is likely to be lost during transmission. For this reason, numerous error concealment (EC) algorithms have been proposed to combat channel errors. On the other hand, most existing algorithms cannot conceal the whole missing frame effectively. To resolve this problem, this paper proposes a new Adaptive Prediction Unit-based Motion Vector Extrapolation (APMVE) algorithm to restore the entire missing frame encoded by High Efficiency Video Coding (HEVC). In each missing HEVC frame, it uses the prediction unit (PU) information of the previous frame to adaptively decide the size of a basic unit for error concealment and to provide a more accurate estimation for the motion vector in that basic unit than can be achieved by any other conventional method. The simulation results showed that it is highly effective and significantly outperforms other existing frame recovery methods in terms of both objective and subjective quality.