• Spatial Information Research
• /
• v.17 no.3
• /
• pp.261-268
• /
• 2009

This study accomplished to draw a soil erosion map and a grade map of soil loss hazard in Korea. RUSLE and Rainfall-runoff (R) factor, which was estimated by using the rainfall data observed in 59 meteorological stations from 1977 to 2006 (for 30 years). FARD was used to analyze the frequency, and the whole country R factor was estimated according to the frequency. In the analysis of estimating the whole country R factor, Nakdong river has the smallest vaule, but Han river has the biggest value. According to the result of analyzing soil loss, soil loss occurred in a grass land, a bare land and a field in size order, and also approximately 17.2 ton/ha soil loss happened on the whole area. The average soil loss amount by the unit area takes place in a bare land and a grass land a lot. The total amount of soil loss in 5-year-frequency rainfall yields 15,000 ton and, what is more, a lot of soil loss happens in a paddy field, a forest and a crop field. The grade map of soil loss hazard is drawn up by classifying soil loss hazard grade by 5. As a result of analyzing soil loss, the moderate area which is the soil loss hazard grade 2 takes up the largest part, 72.8% of the total soil loss hazard area, on the contrary, the severe soil loss hazard area takes up only $1,038km^2$ (1.1%) of the whole area. The severe soil loss hazard area by land cover shows $93.5km^2$ in a bare land, $168.1km^2$ in a grass land and $327.4km^2$ in a crop field respectively.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.5
• /
• pp.531-540
• /
• 2016

The adoption of legume cover crops in no-tillage system can contribute to improve soil fertility by providing several benefits, including reduction in soil erosion, suppression of weed growth and N supply to subsequent crops. We conducted a field study to investigate the effect of cover crops and nitrogen fertilization rates on yield and nitrogen use efficiency of waxy corn (Zea mays L.) in no-tillage upland field. Two legume cover crops, hairy vetch (Vicia villosa Roth) and crimson clover (Trifolium incarnuturn L.) were mechanically terminated with roller in early June. For each cover crop treatment, nitrogen (N) fertilizer was applied at three different rates (145, 72.5 and $0kg\;N\;ha^{-1}$). The growth and yield characteristics of corn were significantly affected by the N fertilization rates in crimson clover plots, which suggest N mineralization from the cover crop residue was not sufficient. In contrast, N fertilization rates had no significant effect on growth and yield of corn in hairy vetch plots, indicating that the amount of N released from the cover crop is large enough to meet most of the N requirement of corn. However, the application of N fertilizer in hairy vetch cover plots resulted in slight increase of crop yield, though not statically significant, and high levels of N concentration in corn plant tissue possibly due to luxury consumption of N. Organic residues on the soil surface in hairy vetch cover plots had substantial amounts of N after harvest, ranging from 100 to $116kg\;N\;ha^{-1}$, which is presumably retained during winter season and released by microbial mineralization in subsequent year. The highest nitrogen yield efficiency was achieved in the plot with hairy vetch cover and no N fertilizer application, followed by the plot with hairy vetch cover and $72.5kg\;N\;ha^{-1}$ fertilization rate. In conclusion, hairy vetch showed better performance in corn productivity as compared with crimson clover. In addition, it was concluded that the application of N fertilizer between 0 and $72.5kg\;N\;ha^{-1}$ in combination with hairy vetch cover crop might be most efficient for corn yield under no-tillage system with climatic and soil characteristics similar to those of the experimental site.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.4
• /
• pp.624-629
• /
• 2004

The purpose of study was to observe the effect of fluoride and calcium on enamel remineralizaton in vitro. Human premolar enamel specimens were prepared by demineralization in $0.1{\sim}l.0%$ citric acid for 60 minutes. They were remineralized for 6 hours in one of the 1311owing solutions : (1) artificial saliva, (2) artificial saliva with 100ppmF, (3) artificial saliva with 1000ppmF, (4) artificial saliva with 1000ppmCa, and (5) artificial saliva with 100ppmF and 1000ppmCa. No significant remineralization was occurred in artificial saliva and artificial saliva with 100ppmF. Significant remineralization was observed in artificial saliva with 1000ppmF at 3 hours, and in artificial saliva with 1000ppmCa and artificial saliva with 100ppmF and 1000ppmCa at 3 and 6 hours(P<0.05). The remineralization effect of artificial saliva with 100ppmF and 1000ppmCa was greater than that of artificial saliva or artificial saliva with 100ppmF. Addition of F to 100ppm or 1000ppm, addition of Ca to 1000ppm, and increasing the concentration of F from 100ppm to 1000ppm did not significantly increase the remineralization.

• Journal of Korea Water Resources Association
• /
• v.53 no.11
• /
• pp.951-960
• /
• 2020

This study investigates the adjustment processes of the rivers after weir removal through laboratory experiments. Delta upstream eroded rapidly by flow at the initial stage of the experiments and the knickpoint migrates upward. Moreover, the knickpoint moves fast upward on the condition of alternate bars. The head cutting in the bed is developed fast at the initial stage. However, the erosion speed in the bed decreases with time. The well developed alternate bars migrates with keeping their shape downstream, and the bars affect the channel downstream to adjust new environments after weir removal. Maximum scouring depth downstream and the migration speed decrease over time after removing the weir. The scouring depth in the channel without alternate bars migrates with speed. However, the depth in the channel with alternate bars migrates slow downstream. The channel with alternate bars, in turn, is adjusted well to the new equilibrium states. The maximum scouring depth migrates downstream with time, and the scouring depth and its migration speed decreases with time. The dimensionless maximum scouring depth decreases with the migration speed of dimensionless maximum scouring depth because the deeply scoured places capture the sediments from upstream and the migration speed is slow as the places are filled with them. The dimensionless maximum scouring depth is shallow as the dimensionless backfilling speed is high. The dimensionless maximum scouring depth decreases rapidly less than 5 of dimensionless backfilling speed. However, the depth decreases slow more than 5 of it.

• Journal of Korean Society of Forest Science
• /
• v.106 no.1
• /
• pp.70-76
• /
• 2017

Among the forest road pavement methods, the majority of current constructions utilize concrete pavements but it has disadvantages as follows: many cracked concrete pavements generated by the erosion of underlying soil layers, could not be used as forest roads in steep slope during winter, and cement contains hazardous chemicals (hexavalent chromium, etc.). In order to supplement the limitations of the use of concrete pavement, this study was conducted to investigate the operation process and cost, the strength and compaction of the experimental forest road pavement(85 m) utilizing eco-friendly solidification material at Goryeong-gun, Gyeongsangbuk-do. The work elements of experimental forest road paving were classified into: preparation, Roadbed excavation, Roadbed grading, subgrade compaction, form work, collection and selection of site soil, mixing site soil and eco-friendly solidification material, paving by eco-friendly solidification material, compaction by vibrating roller and curing. The result of economic analysis using construction cost shows that for concrete costs total to $38,681won/m^3$ while for the eco-friendly paving material it is $38,245won/m^3$. Thus the construction costs for concrete and the eco-friendly paving material are similar. And the results of the Schmidt Hammer test for strength analysis by curing period are 10.5-13.5 MPa for 7 days, 18.1-22.7 MPa for 14 days, and 20.8-23.0 MPa for 28 days.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.6
• /
• pp.69-75
• /
• 2010

Total suspendid solid (TSS) of non point source pollutants in construction site are in higher concentration than others (BOD, COD etc). Also, the TSS concentration is very sensitive to the rainfall intensity in early stage of construction. There are two methods for treatment of non point source pollutants, which are temporary treatment facility and filtering one. But they have disadvantages. Temporary facility system has very low efficiency and filtering system consumes high energy and takes up large footprint. This study shows how prefabricated flocculation/coagulation system is developped to cover the above weakness and evaluation of the system performance in construction site. The prefabricated flocculation/coagulation system has very high treatment efficiency comparing with temporary and filtering system and takes small footprint. Therefore, it expects that the system leads to prevention of pollution near construction site and reduction of public grievance. Proper coagulant dosage and sludge circulation facility application, controlling the height of sludge interfacial are necessary to maximize the system efficiency.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.21 no.4
• /
• pp.982-991
• /
• 2007

The present study was done to assess the suppressive effects of Haedongpi-san(HDPS), a traditional herbal medicine, on collagen induced arthritis (CIA) in mice and to examined it's effects on immune system. Oral administration of HDPS (200 or 400 mg/Kg) significantly suppressed the progression of CIA, which extend is comparable to that of methotrexate (MTX, 30 mg/Kg), a positive control. Histological examinations reveled that HDPS inhibited infiltration of inflammatory cells into affected paw joint, and bone erosion and cartilage destruction were greatly reduced compared with control. In paw joint, the number of CD3+ cells and CD11b+/Gr-1+ cells were greatly reduced by HDPS. The levels of pathologic cytokines including TNF-a and IL-6 were significantly decreased in the serum by oral treatment with HDPS. The levels of $IFN-{\gamma}$ in the culture supernatant of splenocyte stimulated with CD3/CD28 or collagen were dramatically decreased, while those of IL-4 was increased. Rheumatoid factors including IgG, IgM and collagen specific antibody were present much lower in the serum of HDPS treated mice than control. In peripheral blood mononuclear cells of HDPS treated mice, the percentage of CD3+, CD3+/CD69+, CD4+, CD4+/CD25+ cells were significantly decreased, while CD19+ cells were slightly increased compared with control. The absolute number of CD19+, CD3+, CD3+/CD69+, CD4+/CD25+, CD49b+ cell in spleen from HDPS treated mice were significantly decreased. The absolute number of CD3+, CD3+/CD69+, CD4+, CD4+/CD25+ CD8+, CD49b+, CD3+/CD49b+ cells in draining lymph node were significantly increased compared with control. Taken together, HDPS has suppressive effects on rheumatoid arthritis by modulating immune system, and has potential to use as an therapeutic for rheumatoid arthritis.

• Journal of Sensor Science and Technology
• /
• v.8 no.5
• /
• pp.414-420
• /
• 1999

The oxide sacrificial layer technology is one of the key technologies in surface micromachining. However, the commonly used aqueous HF solutions, including the $NH_4F$ buffered HF solutions (BHF), are known to attack the Al metal layers during the oxide sacrificial etch. A mixed $NH_4F$/HF/glycerine aqueous solution of 4:1:2 ratio is known to have the best etch selectivity between oxide and AI, but even this sacrificial etchant has a significant etch rate for AI. This paper reports an extensive experimental study on various concentration ratios for HF, $NH_4F$ and glycerine, and develops the optimal mixture ratio for sacrificial etching. At the $NH_4F$/HF/glycerine ratio of 2:1:4, the etch selectivity between PSG and Al improves by approximately 6 times over the previously known best selectivity, to a value of 7,700. At this condition, the measured etch rate of PSG film is approximately $2.1\;{\mu}m/min$, which is sufficiently fast. The developed sacrificial etchant allows the addition of a Al metal layer in surface micromachining, without the worry of Al layer erosion during sacrificial etch.

• Journal of Embryo Transfer
• /
• v.32 no.3
• /
• pp.235-241
• /
• 2017

To preserve genetic materials, cryopreservation of the semen from live animals is the main technique to establish cryo-banking system which could be used for artificial insemination and embryo transfer. However, the population of Korean black goat (KBG) becomes to dwindle in number and is now faced genetic erosion by crossbreeding with non-native breeds in small KBG farms. In this study, simple freezing method was used to preserve frozen semen from KBG using spermatozoa of cauda epididymis (CE) and electro-stimulated semen (ES). The negative effects of seminal plasma on fresh sperm was confirmed using precipitation test of Triladyl egg yolk diluent and sperm viability after thawing was compared between CE and ES spermatozoa. When seminal plasma of fresh ES semen was washed with semen washing media (SWM), the rates of live sperm shown no significant difference between CE and ES spermatozoa before freezing. However, the survival rate of frozen/thawed CE sperm was higher than ES ($74.6{\pm}10.6%$ vs $53.8{\pm}5.2%$) with significant difference (p < 0.05). The results of longevity test on frozen/thawed sperm from CE showed healthier sperm than ES. Therefore, spermatozoa from CE could be used for cryo-banking system in KBG lines. The more studies are needed to increase survival rate of ES semen.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.10
• /
• pp.687-693
• /
• 2013

Coastal sand dunes have been seriously damaged caused by the development thoughtless for the environment and coastal erosion and destruction due to artificial structures like coast roads and breakwater. Hereupon, in this study we made a library of rhizobacteria that have the plant growth-promoting ability for plant rhizosphere of indigenous plants inhabiting in a coastal sand dune as well as the strong tolerance to salt, and evaluated the plant growth-promoting ability of these strains. Furthermore, we evaluated the effect of rhizobacteria on the growth rate of saline tolerant plants in sandy soil; selected out the most useful micro-organism for the restoration of a damaged sand dune. The effect of inoculation of strains selected from the first experiment on the growth of Peucedanum japonicum and Arundo donaxes planted in a coastal sand dune was evaluated. As a result, Bacillus aerius MH1RS1 had plant growth promoting activities: indole acetic acid (IAA) production, siderophores and 1-aminocyclopropane-1-carboxylate deaminase (ACC deaminase) activity, and also had a salinity tolerance. Also, in case of Peucedanum japonicum, the length of stems and weights of roots were enhanced by the inoculation of B. aerius MH1RS1. Fresh weights of stems and weights of roots in experimental group were, in particular, increased by 25% comparing with the control group. For an Arundo donax in experimental group, plant length increased by 18%, and weight of roots by 20% which is significant.