• Fashion & Textile Research Journal
• /
• v.19 no.4
• /
• pp.504-514
• /
• 2017

Discomfort as well as muscular pain and musculoskeletal diseases occur in cases of stressed posture due to prolonged pressure. Therefore, the American Academy of Orthopaedic Surgeons (AAOS) and Pediatric Orthopaedic Society of North America (POSNA) recommend that bags that weigh no more than 15 - 20% of the wearer's weight. However, despite the prolonged pressure from using baby carriers, there are no recommendations and limited studies on how to protect wearers. Therefore, this study investigates subjective fatigue according to the usage of waist support and hip seat. Based on this, muscle fatigue and secondary subjective fatigue according to three types of currently commercial baby carriers (X-type, H-type, and H-hip type) were measured. Subjective comfortability was evaluated on a 5 point Likert-scale and subjective fatigue was evaluated on Borg's CR-10 scale. Objective muscle fatigue was also compared by measuring and analyzing electromyogram (EMG). The results of primary subjective fatigue showed statistically significant changes in the shoulders, waist, calves, and soles of the feet according to the usage of hip seats and waist support. Electromyogram measurements also showed less muscle fatigue at the upper trapezius muscle and thoracic erector spine muscle for the H-hip seat baby carrier, which has both waist support and hip seat, compared to an X-type baby carrier, which has neither. However, results of subjective fatigue showed opposite results at the waist despite having same results at the shoulders and beneath the shoulders. This show discrepancies between objective muscle fatigue and subjective fatigue; therefore, that both aspects must be taken into consideration when developing ergonomic baby carriers.

• Korean Journal of Human Ecology
• /
• v.24 no.2
• /
• pp.255-266
• /
• 2015

In this study, we have developed the ergonomic pattern from the 3D human body reflecting cycling posture and extensibility of the stretch fabrics. Adjusting pressure level in the construction of athlete's tight-fitting stretch garments by reducing the original pattern is a challenging subject, which influence on the performance of the wearer directly. Therefore, in this study, relationships between the reduction rates of the 2D pattern obtained from the 3D human scan and resultant clothing pressure were explored to improve the fit and pressure exerted by reduced clothing pattern. Subjective wear sensations of the experimental garments were rated using a seven-point Likert scale on two consecutive days. While wearing the garments, subjects were asked to take five different postures including waist flexion, sitting and others. A Likert-type scale was used for the evaluation, with 7 points indicating the best fit in tight-fitting pants. Comparing 2/3T-pattern with T-pattern, the latter was superior to 2/3T-pattern in terms of adhere well to the waist and hip area in the 0.032 significance level. T-pattern was superior to 2/3T-pattern in terms of fitting and wear comfort. As results, the pattern obtained from the flexed body reflecting cycling posture already included the contraction and extension of the skin while cycling posture, so that the extra ease for movement and good fit was not need to be considered. The optimized reduction rates were determined with the proposed reduction rate, the resultant pressure range was within the range of $0.5{\sim}3.0gf/cm^2$ at eight locations on the body except front waist band and thigh band.

• Journal of Biosystems Engineering
• /
• v.36 no.1
• /
• pp.58-67
• /
• 2011

A high prevalence of protected horiculture farmer's work-related musculo-skeletal disorders (MSDs) have been reported in precedent studies. One of the tasks required ergonomic intervention to reduce the musculo-skeletal risks is the task of harvesting. The purpose of this study is to evaluate quantitatively the spinal load of worker harvesting with squatting posture to predict and prevent musculo-skeletal risks. Spinal load in Squatting posture with asymmetric trunk motion were analyzed. Before evaluating spinal load on harvesting worker by bio-mechanical approach, it is needed to validate human model. In this study, ADAMS LifeMOD human model shows satisfactory results, comparing with already validated model's results or measured results. While worker reached arms (20%, 40%, 70% arm reach) with various asymmetric trunk motion (0, 45, 90 degree), their spinal loads (extension, twisting and lateral bending moment) were evaluated. In case of extensor moment at lumbo-sacral joint, the more the arm reach got increased, the moment increased. however, in case of twisting moment and lateral bending moment, the more both arm reach and asymmetric trunk motion got increased, the moment increased significantly. The findings of this study suggest that it need to be determine the spinal load, especially twisting, lateral bending moment in evaluating musculo-skeletal workload in squatting posture.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.39 no.2
• /
• pp.271-286
• /
• 2015

This study presented functional designs for development of functional compression wear for men in their forties based on body muscles as well as designed 2D patterns using 3D standard body form data of men in their forties. Patterns with an optimal stretch rate were proposed through a comfort evaluation. Different material was used for different areas such as the sports ability strengthening areas including body parts that often move for sports (such as the shoulders, abdomen and lower arm), areas that require ventilation for perspiration (such as the chest and back center, and armpits), and stable form areas (such as the chest, waist and elbows). The front and back surface areas of the developed pattern was an average 102.4% size compared to the body surface area. The results indicated that the 90% reduction pattern showed changes in pressure value according to area of movement, had the best breathability when worn, and had the best, most comfortable fit compared to the other subjects. The clothing pressure values of the pattern were around 22.1-23.4mmHg for the arm area (which has a big movement range and has many muscles) and 10.4-11.8mmHg for chest and abdomen areas related to major organs and breathing, indicating appropriate clothing pressure. A compression wear top pattern with pressure appropriate to the target age range and excellent appropriateness for the body form will be developed for men in their forties. A study method will be proposed to develop design technology for ergonomic compression wear tops with excellent fit and comfort.

• Proceedings of the Safety Management and Science Conference
• /
• 2009.11a
• /
• pp.15-24
• /
• 2009

Cycling that transform human energy into mechanical energy is one of the man-machine systems out of sports fields. Benchmarking means " improving ourselves by learning from others ", therefore benchmarking toward dominant cyclist is necessary on field. the goals of this study were to provide important factors on multi-disciplines (kinematics, physiology, power, psychology) for a tailored-training program that is suitable to individual characteristics. Two cyclist participated in this study and gave consent to the experimental procedure. one was dominant cyclist (years:21 yrs, height:177 cm, mass:70 kg), and the other was non-dominant cyclist(years:21, height:176, mass:70). Kinematic data were recorded using six infrared cameras (240Hz) and QTM (software). Physiological data (VO2max, AT) were acquired according to graded exercising test with cycle ergometer and power with Wingate test used by Bar-Or et. al ( 1977) and to evaluate muscle function with Cybex. Psychological data were collected with competitive state anxiety inventory (CSAI-2) that were devised by Martens et. al (1990) and with athletes' self-management questionnaire (ASMQ) of Huh (2003). It appears that the dominant's CV(coefficient of variability) was higher than non-dominant's CV in Sports Biomechanics domain, that the dominant's values for all factors ware higher than non-dominant's values in physical, and physiological domain, and their values between cognitive anxiety and somatic anxiety were contrary to each other in psychology. Further research on multi-disciplines may lead to the development of tailored-optimal training programs applicable with key factors to enhance athletic performance by means of research including athlete, coach and parents.

• Journal of the Ergonomics Society of Korea
• /
• v.33 no.1
• /
• pp.59-68
• /
• 2014

Objective: The aim of this study is to investigate the effect of BackJoy on how it effectively reduces the physical load generated in a posture in which the user sits, increases user's comfort and satisfaction, and maintains the correct posture. Background: Because of development of science and economic development, most office workers and students spend about 75% of their working time in chairs. However most of them have a poor posture. Method: This experiment conducted measurement using a pressure mat and surveyed to evaluate fatigue level, satisfaction and comfort of sit. The study is experimented 20 male and 14 female participants. The participants carried out four different types of tasks and each task took 20 minutes long. Results: In the case of experiment results before and after the use of BackJoy, average pressure, contact area and pressure per unit area appear to prove that using BackJoy is more effective. Conclusion: Through this study, the BackJoy's effects for the maintenance of good posture and loads that occur in the body are reduced. In the future study, there are some researches needed for various verifications using an EMG sensor that shows loads of vertebrae and we need to analyze each group of the participants by dividing them. Application: The evaluation method used in this study can be applied to evaluating ergonomic chairs.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.3
• /
• pp.427-435
• /
• 2011

Objective: The objective of this study was to evaluate a work of building cleaners using the ergonomic methods. Background: Previous studies about cleaning worker describe typical physical demands of this work. They found that the most significant risk factors associated with the physical work of cleaners are static loads and repetitive movements and high output of force. Method: A head of ergonomics estimation was work analysis(define of combined task, work tool, work time and frequency of combined task) and posture analysis of worker. Results: The results showed that combined task of building cleaners was classification sweeping, mopping(wet), mopping(oil), moving barrels/carts, dumping trash bags, scrubbing, arrangement of cleaning tool, arrangement of circumferential, moving of cleaning tool, and waiting. The work time of combined task such as mopping(wet) and scrubbing indicated high ratio. The posture analysis of building cleaners indicated high value in bending of the head, lower arm, and hands. Conclusion: The findings appear to indicate that building cleaner were related to high risk of work-related musculoskeletal disorders. So, building cleaner would be required an interventional strategy, improvement of cleaning tools and working environment. Application: If ergonomics rule can be integrated into existing cleaning tools and work environments, the risk of occupational injuries will be reduced.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.4
• /
• pp.121-129
• /
• 2018

The purpose of this study is to provide a basic data of clothing development which can improve the satisfaction of the body shape by examining the subjective evaluation and type characteristics of the old-old women themselves. Q methodology was used for the study of subjectivity. The types of the body shape of the old-old women were analyzed as five types: bent body with protruding abdomen, backward bent body with slender legs, inverted triangle, swollen cylinder, triangle. The bent body with protruding abdomen had a bent back and waist. They were recognized that the bust and shoulders were sagging and abdomen was protruding. The backward bent body with slender legs was the smallest of the five types with a BMI index and shoulders and bust were sagging. And knee and waist were bent and legs were thin. The inverted triangular shape showed the highest BMI index among the 5 types, indicating that it is obese. They thought that the upper body was developed and the lower body and legs were slender. The swollen cylinder shape was analyzed to be the smallest and the most fat body. The triangle shape had developed lower body and bent back and waist. It is considered that a design consideration is needed to cover the disadvantages of the body shape in consideration of not only wearing feeling but also aesthetic part when making clothes. By making ergonomic garments considering the characteristics of body shape, it can be expected to change the body shape due to the wearing of clothing that is not suitable for body shape and the effect on physical health in a positive direction.

• Journal of the Korean Society of Safety
• /
• v.26 no.1
• /
• pp.58-64
• /
• 2011

This study evaluated the effects of the handle width(shoulder width, 1.25${\times}$shoulder width, 1.5${\times}$shoulder width), height(3 levels : knee, medium, knuckle) and horizontal angle($0^{\circ}$, $10^{\circ}$) on the pushing, lifting, and twisting strengths which were required for carrying single or two wheel barrows. Twelve healthy college students(male) participated in the experiment. In each experimental condition($3{\times}3{\times}2$=18), the subjects exerted three forces(pushing, lifting, and twisting clockwise). The experimental conditions and three forces were tested in random order, and a minimum 2 minutes of rest was provided between exertions. Results showed that the mean and maximum pushing forces showed greater values when the horizontal angle was $0^{\circ}$ than $10^{\circ}$(p=0.016). However, the three independent variables had no statistically significant effects on the lifting forces(p>0.1). The mean and maximum twisting forces increased as the handle width became larger(p<0.05). Also, there was a marginal effect of the horizontal angle(p=0.065) on the twisting force. From the results of this study, the horizontal angle of $0^{\circ}$ and the wider handle width were suggested for the design of single-wheel barrows.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.5
• /
• pp.79-87
• /
• 2021

This study suggests a design process for vibrotactile interface that can apply haptic perception factors reflecting human tactile mechanisms. This process consists of 4 stages: the haptic sense requirement analysis stage, the haptic element analysis stage, the haptic perception factor analysis stage, the haptic requirement detailed design, and the prototype implementation stage. The advantage of this design process is that unnecessary tasks can be excluded in deriving and implementing user requirements, by applying haptic perception factor analysis, and the biggest feature is that research results on ergonomic mechanisms can be reflected in the haptic design, completes prototype development simultaneously while determining the haptic requirements statement by performing user evaluation, usability testing, and haptic feature optimization tasks simultaneously. This design process includes all stages from user requirements to haptic function detailed design and prototype implementation, so it is expected that general developers who lack expertise in haptic will also be able to design user-centered designs, enabling design and implementation of haptic functions at a certain level.