• Journal of Korean Neurosurgical Society
• /
• v.30 no.10
• /
• pp.1210-1219
• /
• 2001

Introduction : The purpose of this study was to analyze the safety, pullout strength and radiographic characteristics of unicortical and bicortical screws of cervical facet within cadaveric specimens and evaluate the influence of level of training on the positioning of these screws. Methods : Twenty-one cadavers, mean 78.9 years of age, underwent bilateral placement of 3.5mm AO lateral mass screw from C3-C6(n=168) using a slight variation of the Magerl technique. Intraoperative imaging was not used. The right side(unicortical) utilized only 14mm screws(effective length of 11mm) while on the left side to determine the length of the screw after the ventral cortex had been drilled. Three spine surgeons(attending, fellow, chief resident) with varying levels of spine training performed the procedure on seven cadavers each. All spines were harvested and lateral radiographs were taken. Individual cervical vertebrae were carefully dissected and then axial radiographs were taken. The screws were evaluated clinically and radiographically for their safety. Screws were graded clinically for their safety with respect to the spinal cord, facet joint, nerve root and vertebral artery. The grades consisted of the following categories : "satisfactory", "at risk" and "direct injury". Each screw was also graded according to its zone placement. Screw position was quantified by measuring a sagittal angle from the lateral radiograph and an axial angle from the axial radiograph. Pull-out force was determined for all screws using a material testing machine. Results : Dissection revealed that fifteen screws on the left side actually had only unicortical and not bicortical purchase as intended. The majority of screws(92.8%) were satisfactory in terms of safety. There were no injuries to the spinal cord. On the right side(unicortical), 98.9% of the screws were "satisfactory" and on the left side(bicortical) 68.1% were "satisfactory". There was a 5.8% incidence of direct arterial injury and a 17.4% incidence of direct nerve root injury with the bicortical screws. There were no "direct injuries" with the unicortical screws for the nerve root or vertebral artery. The unicortical screws had a 21.4% incidence of direct injury of the facet joint, while the bicortical screws had a 21.7% incidence. The majority of "direct injury" of bicortical screws were placed by the surgeon with the least experience. The performance of the resident surgeon was significantly different from the attending or fellow(p<0.05) in terms of safety of the nerve root and vertebral artery. The attending's performance was significantly better than the resident or fellow(p<0.05) in terms of safety of the facet joint. There was no relationship between the safety of a screw and its zone placement. The axial deviation angle measured $23.5{\pm}6.6$ degrees and $19.8{\pm}7.9$ degrees for the unicortical and bicortical screws, respectively. The resident surgeon had a significantly lower angle than the attending or fellow(p<0.05). The sagittal angle measured $66.3{\pm}7.0$ degrees and $62.3{\pm}7.9$ degrees for the unicortical and bicortical screws, respectively. The attending had a significantly lower sagittal angle than the fellow or resident(p<0.05). Thirty-three screws that entered the facet joint were tested for pull-out strength but excluded from the data because they were not lateral mass screws per-se and had deviated substantially from the intended final trajectory. The mean pull-out force for all screws was $542.9{\pm}296.6N$. There was no statistically significant difference between the pull-out force for unicortical($519.9{\pm}286.9N$) and bicortical($565.2{\pm}306N$) screws. There was no significant difference in pull-out strengths with respect to zone placement. Conclusion : It is our belief that the risk associated with bicortical purchase mandates formal spine training if it is to be done safely and accurately. Unicortical screws are safer regardless of level of training. It is apparent that 14mm lateral mass screws placed in a supero-lateral trajectory in the adult cervical spine provide an equivalent strength with a much lower risk of injury than the longer bicortical screws placed in a similar orientation.

• Journal of the Korean Wood Science and Technology
• /
• v.6 no.2
• /
• pp.3-19
• /
• 1978

Five species, Abies koreana Wilson (A. koreana), Castanopsis cuspidata var. Sieboldii Nakai (C. Cuspidata). Machilus thunbergii Sieb. et Zucc. (M. thunbergii), Styrax japonica (S. japonica), and Quercus acuta Thunberg(Q. acuta) growing in the southern part of Korea were selected for the investigation of wood properties. In order to evaluate the wood properties of these five species, anatomical, physical, mechanical, chemical and pulping characteristics were investigated. And this study also covered wood technological problems related to the drying, gluing, debarking, flooring, and wood workability so that these species might serve to the best advantage. The results obtained were summarized as follows: 1. The trunk of A. koreana with many knots was straight. However, the trunks of S. japonica and C. cuspidata were crooked. 2. A. koreana showed the longest and the widest ill the fiber morphology; 2.97mm in length, 39.3${\mu}$ in width. In general, fiber width of all the species investigated were greater than those of other Korean hardwoods. 3. The specific gravity of Q. acuta was 0.74${\pm}$0.03, and that of A.koreana was 0.34${\pm}$0.02. The range of specific gravity of the other species was 0.47-0.52. 4. The adsorption of water was propotioned inversely with the specific gravity, but the adsorption of humidity was proportioned with the specific gravity. In spite of their medium density, S. japonica showed the greatest adsorption, and M. thunbergii the least. The water adsorption of cross section was twice greater than that of lateral direction, and there was a slight difference in between the radial and the tangential direction. 5. Shrinkage for tested five species was ranged from 5.36 to 10.24% in tangential direction, and 2.83~6.13% in radial direction. Q. acuta recorded the greatest shrinkage rate, and A. koreana the least. The greater was the specific gravity, the larger was the shrinkage rate. 6. The mechanical properties of Q. acuta were similar to those of Quercus mongolica which grow in Kangwon-Do. Strength properties of C. cuspidata, M. thunbergii, A. koreana were equivalent to those of other Korean commercial woods with similar specific gravity, except S. japonica which showed slightly higher strength than that of other species with similar density. 7. Higher glue joint strength for urea and phenol adhesieves was recorded in the species of M. thunbergii and C. cuspidata, however, high-density species(Q. acuta) and even low-density species(A. koreana) did not show good joint strength. 8. The attractive figure of M. thunbergii in texture seemed to he appreciated for decoration. And the grain and texture of other species were proper for furniture and building materials. 9. All of the species except Q. acuta were considered good for wood workability. 10. The denser the specific gravity was, the longer the drying time took. However, severe drying defects were formed in M. thunbergii whose density was medium. 11. All the species were considered suitable for the flooring wood expect A. koreana whose density was light. 12. Pentosan component in all the species was great, and the amount of extractives in Q. acuta was worth noticing. 13. Yield in kraft pulp was above the level of economic pulp yield, i.e. 45% in all species. 14. Debarking was easy in the species of A. koreana and M. thunbergii, and debarking after being boiled in water was the most efficient in all species.

• Korean Journal of Environmental Biology
• /
• v.22 no.2
• /
• pp.247-258
• /
• 2004

Climatological, hydrological and planktonical research studies, measurements of primary production and photosynthetic efficiency from December 1976 to December 1978 have been carried out in two brackish lakes: Lake Etang de Berre and Lake Etang de Vaine located in the French Mediterranean coast, in the region of Carry-le-Rouet located on the north-west Mediterranean near Marseilles, and in fresh water inflows from 4 Rivers (Touloubre, Durance, Arc, Durancole) to Lake Etang de Berre. Physico-chemical parameters were measured for this study: water temperature, salinity, density, pH, alcalinity, dissolved oxygen (% saturation), phosphate, nitrate, nitrite, silicate etc. Diverse biological parameters were also studied: photosynthetic pigments, phaeopigments, specific composition and biomass of phytoplankton, primary pelagic production etc. Climatical factors were studied: air-temperature, solar-radiation, evaporation, direction (including strength) of winds, precipitation and freshwater volume of the four rivers. The changes in Lake ‘Etang de Berre’ ecosystem depend on the quality of the water in the Durance River, and on the effects of seawater near the entrance of the Caronte Canal. The water quality of the lake varies horizontally and vertically as a result of atmospheric phenomena, maritime currents and tides. The distribution of water temperatures is generally heterogeneous. Southeasterly winds and the Northeasterly Mistral wind are important in the origins of circulated and mixed water masses. These winds are both frequent and strong. They have, as a result, a great effect on the water environment of Lake Etang de Berre. In theory, the annual precipitation in this region is well over eight times the water mass of the lake. The water of the Durance River flows into Lake Etang de Berre through the EDF Canal, amounting to 90% of the precipitation. However, reduction of rainfall in dry seasons has a serious effect on the hydrological characteristics of the lake. The temperature in the winter is partially caused by the low temperature of fresh water, particularly that of the Durance River. The hydrological season of fresh and brackish water is about one month ahead of the hydrological season of sea water in its vicinity. The salinity of Lake Etang de Berre runs approximately 3$\textperthousand$, except at lower levels and near the entrance to the Caronte Canal. However, when the volume of the Durance River water is reduced in the summer and fall, the salinity rises to 15$\textperthousand$. In the lake, the ratio of fresh water to sea water is six to one (6:1). The large quantities of seston conveyed by rivers, particularly the Durance diversion, strongly reduce the transparency in the brackish waters. Although the amount of sunshine is also notable, transparency is slight because of the large amount of seston, carried chiefly by Tripton in the fresh water of the Durance River. Therefore, photosynthesis generally occurs only in the surface layer. The transparency progressively increases from freshwater to open seawater, as mineral particles sink to the bottom (about 1.7kg $m^{-2}a^{-1}$ on the average in brackish lakes). The concentration of dissolved oxygen and the rate of oxygen saturation in seawater (Carry-le-Rouet) ranged from 5.0 to 6.0 $m\ell$ㆍ.$1^{-1}$, and from 95 to 105%, respectively. The amount of dissolved oxygen in Etang de Berre oscillated between 2.9 and 268.3%. The monographs of phosphate, nitrate, nitrite and silicate were published as a part of a study on the ecology of phytoplankton in these environments. Horizontal and vertical distributions of these nutriments were studied in detail. The recent diversion of the Durance River into Lake Etang de Berre has effected a fundamental change in this formerly marine environment, which has had a great impact in its plankton populations. A total of 182 taxa were identified, including 111 Bacillariophyceae, 44 Chlorophyceae, and 15 Cyanophyceae. The most abundant species are small freshwater algae, mainly Chlorophyceae. The average density is about $10^{8}$ cells $1^{-1}$ in Lake Etang de Berre, and about double that amount in Lake Etang de Vaine. Differences in phytoplankton abundance and composition at the various stations or at various depths are slight. Cell biovolume V (equivalent to true biomass), plasma volume VP (‘useful’ biomass) and, simultaneously. the cell surface area S and S/V ratio through the measurement of cell dimensions were computed as the parameters of phytoplankton productivity and metabolism. Pigment concentrations are generally very high on account of phytoplankton blooms by Cyanophyceae, Chlorophyceae and Cryptophyceae. On the other hand, in freshwaters and marine waters, pigment concentrations are comparatively low and stable, showing slight annual variation. The variations of ATP concentration were closely related to those of chlorophyll a and phytoplankton blooms only in marine waters. The carbon uptake rates ranged between 38 and 1091 mg$Cm^{-2}d^{-1}$, with an average surface value of 256 mg; water-column carbon-uptake rates ranged between 240 and 2310 mg$Cm^{-2}d^{-1}$, with an average of 810, representing 290 mg$Cm^{-2}$, per year 45 000 tons per year of photosynthetized carbon for the whole lake. Gross photosynthetic production measured by the method of Ryther was studied over a 2-year period. The values obtained from marine water(Carry-le-Rouet) ranged from 23 to 2 337 mg$Cm^{-2}d^{-1}$, with a weighted average of 319, representing about 110 gCm$^{-2}$ per year. The values in brakish water (Etang de Berre) ranged from 14 to 1778 mg$Cm^{-2}d^{-1}$, with a weighted average of 682, representing 250 mg$Cm^{-2}$ per year and 38 400 tons per year of photosynthesized carbon for the whole lake.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.6
• /
• pp.877-884
• /
• 2013

This study investigated the optimal composition of sugar and artificial sweeteners in oatmeal cookies. Modified cookies were examined for their quality characteristics and glycemic index in humans. Oatmeal cookies with various amounts of sugar (20, 30, or 40%) were made to the equivalent sweetness of 100% sugar cookies (the control) with sucralose and stevioside. The density and acidity of cookie dough were not significantly different between the different cookie groups. However, baking loss and the spread index were significantly lower in the 100% sugar cookie group compared to cookies supplemented with artificial sweeteners. The color lightness (L value) and redness (a value) were highest in 30% and 100% sugar cookies, respectively. The strength of the cookies was negatively correlated with sugar content. In sensory evaluations, scores for taste, color and texture were higher in 30% and 40% sugar cookies, respectively, but the overall preference was higher in 30% sugar cookies. We therefore tested 30% and 100% sugar cookies for their glycemic index in college students. After overnight-fasted students consumed either 30% or 100% sugar cookies (containing 50 g of carbohydrate in dough weight), blood glucose levels increased 27.8 and 15.7 mg/dL, respectively, at 1 hour from the baseline. However, at 2 hours from the baseline, students who consumed 100% sugar cookies had a remarkably lowered blood glucose levels. Students who consumed 30% sugar cookies did not have as much of a change in blood glucose levels. In conclusion, 30% sugar oatmeal cookies made with sucralose and stevioside can be used to make a low-sugar cookie with a low glycemic index.

• Journal of Radiation Protection and Research
• /
• v.30 no.1
• /
• pp.1-7
• /
• 2005

Radiation absorption parameters of carbon fiber panel were measured in comparison to acrylic panel. $30{\times}30cm$ sized 2mm thick carbon fiber panel and identical sized 6mm thick acrylic panel were placed in tray holder position and 0cm, 5cm, 10cm from surface of phantom. Radiation field size was $10{\times}10cm$. 50MU of 4MV photon was irradiated to the phantom with dose rate of 300MU/min. Source-to-phantom distance was 120cm. Radiation dose was measured with 0.6cc Farmer-type ionization chamber with 1cm build-up. Measurement was repeated thrice and normalization was done to the dose of the open field. Radiation transmission rate of carbon fiber panel is approximately 1% lower than acrylic panel of equivalent thickness. However, considering the strength of the material, transmission rate is higher for carbon fiber panel. Although carbon fiber panel increases the radiation dose when attached to the surface for about 2%, it normalizes the radiation dose to 97-99% of irradiated dose which could have been lowered to as much as 5-7.5% with acrylic panel. As carbon fiber panel is stronger than acrylic panel, radiation fixation device could be made thinner and thus lighter and furthermore, with increased radiation transmission. This in turn makes carbon fiber more ideal material for radiation fixation device over conventionally used acrylic.

• Journal of Nutrition and Health
• /
• v.6 no.1
• /
• pp.1-9
• /
• 1973

I. Subject of the Study: Studies on the economical nutrition supplement of cereal foods for the improvement in our notional eating habits. II. Purpose and Importance of the Study: 1. Our nation is confronted with the situation that the rice, a principal food, short of some essential amino acids, lysine and threonine, leads to imbalanced meals insufficient in the nutrient of protein, to bring many difficulties in the elevation of our national physique. 2. The shortage of even the rice imperfect in the nutrient of protein makes the import of lots of foreign rice inevitable. It is considered that the protein supplement and decrease in the consumption amount, of rice, is a serious key to the solution of our food difficulty, and then a way of the proetin supplement of rice through the addition of essential amino acid is to be rarely applied in the view of the our present finance and situation. 3. In the present experiment, therefore, it aims to the suggestion of an aspect of the improvement in our national eating habits guiding in the nutrition elevation which our nation can afford economically through the development of first, a way of the protein supplement by the mixture of cereals producted plentifully in our country, and second, a way of the decrease in the consumption amount and the improvement in the nutrition of rice through the substitution of the other cereals for rice. III. Contents of Scope of the Study: 1. Objects of the study: Objects of the study are the following three items; a) The nutrition supplement of rice through the mixture of cereals. Our nation makes mainly rice as a principal food, but practically many kinds of cereal are produced in our country. They contain different levels and qualities of each nutrient and they are different from one another in the kinds of essential amino acid consisting protein. For that reason, the mutual complement efficeincy of insufficient nutrients is observed through the mixture of cereals. b) The nutrition supplement of rice through the addition of superior protein sources to rice, a principal food. The development of rice as superior foods in the sense of nutrition is conducted through the risement in protein quality by the addition of protein sources in good quality, for example, fish flour (anchovy flour), egg powder, milk powder, and so on, and through the supplement of vitamins and minerals. c) The decrease in the consumption amount of rice through the substitution of the other cereals for rice, as a principal food. The compensation for the short amount of rice is made by the reduction in the consumption of rice through the discovery of a way of substitution of the other cereals for rice, as a principal food and of the settlement of problems in nutrition and finance subsequent to this. 2. Contents of the study: a) An ideal mixture-ratio of cereals is established for rats by feeding mixed foods(rice-barely or rice-wheat) containing 5%, 15%, 25%, 35% and 45% level of either barely or wheat. b) The nutritive value is determined in the whole subsititution of other foods for rice, and then, a way of the complement of over and under nutrients is devised. c) The ideal combination is investigated for rats through feeding mixed foods of main food, rice and supplement foods of protein sources, soy bean, fish flour, egg powder and milk Powder. d) According to results from the above three experiments, the concise functional test for men and the examination of economical property are made. 3. Scope of the study: a) The observation of the effect of each diet on the growth rate for rats. The growth rate of rats was observed for 15 groups of mixed foods of a main food, rice, and wheat flour, barley powder or soy bean powder, respectively, and 12 groups of wheat flour diets supplemented with $1{\sim}3%$ milk powder, and rice or wheat flour diets supplemented with 5% of milk powder, egg powder, fish flour or soy bean powder, respectively. b) The determination of food consumption. The food consumption was determined at weekly intervals for 27 kinds of diet described in a) item. c) The determination of food efficiency rate. The food efficiency rate for each diet was determined by calculation from the gained body weight and the food consumption amount at the same intervals described in b) item. d) The determination of protein efficiency rate. The protein efficiency rate for each diet was determined by calculation form gained body weight and the protein amount of the food consumption amount at the same intervals described c) item. e) The determination of the body component. The hematocrite and hemoglobin levels in the blood, total nitrogen in the serum, blood sugar, and lipids and glycogen in the liver were determined. f) The observation of nitrogen balance. As a means of the observation of nitrogen balance, the total nitrogen in the urine was determined. g) The analysis of economical property. The economical property was analyzed as the gained body weight to the amount equivalent to one won through the conversion of the food consumption amount into money. h) The functional test for men. The concise functional test for men was made in order to establish if the best diet for experimental animals can be applied to men. IV. Results of the Study: The national food product plan, nationwide nutritive enlightment and the improvement activities in our country eating habits, especially, mixed and powder food problems are to be significantly referred, and the following results must be applied. a) In the mixed foods of cereals, the mixed food of the rice-barley containing $5{\sim}15%$ level of barley is best in terms of nutrition. b) The addition of superior protein sources, egg, Bilk, soy bean, or fish, respectively to either rice or wheat flour makes a great risement in the nutritive value. c) The animal protein is more effective in the elevation of nutritive value of cereals. d) Rice takes the most nutritive operation and has the highest preference, among rice, wheat flour and barley. e) Wheat flour is more economical than rice in evaluation of the gained body weight to the regular money, and the addition of fish or soy bean is more economical than that of any other supplement food. But the above results are true of the range of nutrition and economical property. f) The study on the nutrition composition and barley will lead to the improvement in our national eating habits as mixed food of the rice-barley containing $5{\sim}15%$ level of barley is more nutritive. g) This study on the nutrition only for the growing animal can not be considered as a perfect and entire evaluation. Consequently, the perfect data for our national nutrition can be obtained from the experiment similar to this for the much longer period examining, in details, the growth rate, change of physical strength, mental and bodily change, average life span, and resistance ability to infectious diseases.