• Journal of the Korean Graphic Arts Communication Society
• /
• v.27 no.1
• /
• pp.1-14
• /
• 2009

The color reproduction of digital still camera does not, in general, match those of the final output device. Because color gamut of these devices is different, it is therefore necessary to take account of a way to match. The way uses the optimized profile to output device an image. This paper proposed a way to create the input profile of digital still camera for standardization soft proofing process. The results of proposed way showed that for input profiles equivalent, good results relatively. In this paper, an experiment was done where the illumination sources used as the standard illumination 5200K and illuminated at a $45^{\circ}$ angle in the best illumination efficiently. The white balance was in mode 'custom' : aperture F11, exposure time 1/60s, ISO50, focal length 80mm. The images were exported and saved as 16bit RGB TIFF(AdobeRGB, sRGB, ProphotoRGB) images. To do the test, the RGB values of the RGB TIFF images are processed through the ICC input profile to arrive at processed $CIEL^*a^*b^*$ values. A profiling tool such as ProfileMaker 5.0 and Monacoprofile 4.8 are used to do this. The processed $CIEL^*a^*b^*$ values are compared to the reference $CIEL^*a^*b^*$ values and these two values are used to calculate a ${\Delta}E{^*}_{ab}$.

• Journal of Korean Society for Atmospheric Environment
• /
• v.27 no.1
• /
• pp.63-72
• /
• 2011

This study describes the impact of positive sampling artifact caused by a filter-based sampling in the determination of ambient organic carbon (OC). Three different sampling media combinations were employed for this investigation: (1) Quartz filter-alone (Q-alone), (2) quartz filter behind quartz-fiber filter (QBQ), and (3) quartz filter and quartz filter behind Teflon filter (Q-QBT). The measurement of ambient OC was carried out at a semi-urban site near oceanside at the end of November of 2008. It was found that Q-alone sampling configuration resulted in a higher OC than QBQ and Q-QBT by 14% and 28%, respectively due to no correction for positive artifact caused by adsorption of gas-phase OC onto the filter. A lower quantity of OC was collected from the backup quartz filter on QBQ than that from Q-QBT. A possible explanation is that the front quartz filter of QBQ was not fully saturated with gas-phase OC during the sampling period, allowing smaller amount of gas-phase OC to reach the backup quartz filter. The contribution of positive artifact to $PM_{2.5}$ mass was approximately 2.15 ${\mu}g/m^3$ which is equivalent to 6% in terms of Q-QBT sampling configuration. The positive artifact was found to be more dominated during summer than during winter, showing temperature dependence. It was concluded that Q-QBT sampling configuration offers less impact of positive artifact on ambient OC sampling than QBQ in quantification of OC.

• Journal of environmental and Sanitary engineering
• /
• v.1 no.1 s.1
• /
• pp.109-117
• /
• 1986

As a part of study on prevention from aflatoxin contamination of food and agricultural products, the effects of chloroform extract of various vegetables on the growth and the aflatoxin production by Aspergillus parasiticus R-716 were investigated. Among 15 vegetables tested, garlic, zinger. radish and cabbage were effective in inhibiting the growth of the strain, but eggplant and lettuce slightly accelated. Even though mycelial growth was permitted, 4 vegetables inhibited aflatoxin production in the order of radish, zinger, crown daisy and cabbage, on the contrary, edible burdock and red pepper increased. Especially radish was shown to reduce the aflatoxin production per mycelial weight most. With the addition of chloroform extract equivalent 30g of raw radish on solid media of rice and barley, aflatoxin production of the strain was also inhibited about $80\%$ (484ug, 191ug) of that produced in the control (1796ug, l049ug).

• Journal of the Korean Geotechnical Society
• /
• v.29 no.8
• /
• pp.65-73
• /
• 2013

Ground-coupled heat pump system has attracted attention as a promising renewable energy technology due to its improving energy efficiency and eco-friendly mechanism for space cooling and heating. Pipes buried in the ground play a role of direct thermal interaction between circulating fluid inside the pipe and surrounding soils in the geothermal exchange system. However, both complexities of turbulent flow coupling thermal-hydraulic phenomena and very long aspect ratio of the pipe make it difficult to model the heat exchange system directly. Energy balance for fluid flow inside the pipe was derived to model thermal-hydraulic phenomena, and one-dimensional pipe element was proposed through Galerkin formation and time integration of the equation. Developed element is combined to pre-developed FEM code for THM phenomena in porous media. Numerical results of Thermal Response Test showed that line-source model overestimates equivalent thermal conductivity of surrounding soils due to thermal interaction between adjacent pipes and finite length of the pipe. Thus, inverse analysis for the TRT simulation was conducted to present optimal transformation matrix with utmost convergence.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.12
• /
• pp.35-41
• /
• 2011

In this paper, an analysis for a new substrate shielding symmetric coupled MIS structure consisting of grounded crossbar at the interface between Si and SiO2 layer using the Finite-Difference Time-Domain(FDTD) method is presented. In order to reduce the substrate effects on the transmission line characteristics, a shielding structure consisting of grounded crossbar lines over time-domain signal has been examined. Parameters of symmetric coupled MIS transmission line with various gaps between crossbars for even- and odd-mode are investigated as the functions of frequency, and the extracted distributed frequency-dependent transmission line parameters and corresponding equivalent circuit parameters as well as quality factor for the new MIS crossbar embedded structure are also presented. It is shown that the quality factor of the symmetric coupled transmission line can be improved without significant change in the characteristic impedance and effective dielectric constant.

• Journal of Broadcast Engineering
• /
• v.2 no.1
• /
• pp.45-55
• /
• 1997

In this paper, we propose a fast algorithm with adaptive thresholding for the wavelet transform (WT) based blocking artifact reduction. In the fast algorithm, all processings that are equivalent to the processing in WT domain of the first and second scale are performed in spatial domain. In the adaptive thresholding, the threshold values used to classify the block boundary are selected adaptively according to each input image by using the statistical properties of the WT of the coded signal at block boundary and at block center, which can be obtained in spatial domain. Experimental results showed that the proposed fast algorithm is about 10 times faster than the WT-based algorithm. It also was found that the postprocessing with proposed adaptive thresholding yields some PSNR improvement and better subjective quality over that with nonadaptive thresholding which has best performance at high compression ratios of a certain .image, even at low compression ratios.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.06a
• /
• pp.231-238
• /
• 2005

On the basis of flow resistance theory the conceptual model and related mathematical descriptions is proposed for resistance modeling of groundwater flow in CPM(continuum Porous medium), DFN(discrete fracture network) and fractured-porous medium. The proposed model is developed on the basis of finite volume method assuming steady-state, constant density groundwater flow. The basic approach of the method is to evaluate inter-block flow resistance values for a staggered grid arrangement, i.e. fluxes are stored at cell walls and scalars at cell centers. The balance of forces, i.e. the Darcy law, is utilized for each control volume centered around the point where the velocity component is stored. The transmissivity (or permeability) at the interface is assumed to be the harmonic average of neighboring blocks. Flow resistance theory was utilized to relate the fluxes between the grid blocks with residual pressures. The flow within porous medium is described by three dimensional equations and that within an individual fracture is described by a two dimensional equivalent of the flow equations for a porous medium. Newly proposed models would contribute to develop flow simulation techniques with various matrix characteristics.

• Journal of Fashion Business
• /
• v.5 no.4
• /
• pp.14-26
• /
• 2001

A lot of designers are adopting a mixed imitation as techniques of cretion because cultural boundary and structure of meaning in the era of post-modernism are collapsed and dissolved. I raise up a question mark to how can genuine and creative designers can be identified at this epoch when we are today familiar with the trend of informationalization, opening and globalization. Characterisitics of multi-culturalism and compromising blending are meshed with appearance of a theory of disorganization and consumer-driven economic activity of multi-national enterprises in the age of post capitalism. Accordingly it can be said that designers are leaning upon public and consumeroriented pattern rather than pursuing a creative cultural production. With mass media in rapid advancement and public culture in father dissemination, mass production and mass re-production became a natural cultural phenomenon strengthen ing its root. Creative designers somewhat slow and limitative in pace of adaption to rapid changing society amid such social backgrounds and flooded information are coming to dead-end of wall. A mixed imitation as techniques of creation is a result of borrowing, duplicating or re-combining of existing things because the mixed imitation is equivalent to borrowing, copying, compilation and recombination of well-known artworks, motive, diverse people's cultural features, image, techniques and the likes. It is too delicate thing for one to definitely distinguish such cultural phenomenon from either one as creative work or a plagiarized work. Looking into the facts as they are, we should recognize the designers limitation in their creative works by means of the mixed imitation. thus we can have a view upon them from a criticizing standpoint against the designers creation and imitation. On the other hand, when we look at things how the mixed imitation appears in the fashion as a piece of culture, we can understand something of the contemporary designers. I try to find a significance in seeking out a method of approaching to creative fashion designers direction in future times.

• Journal of Broadcast Engineering
• /
• v.20 no.4
• /
• pp.632-640
• /
• 2015

This paper proposes a new method for fast graphic visualization of accurate frequency response of audio equalizer (EQ). When a logarithmic frequency scale is used, a frequency response in high resolution is required for accurate low-band frequency response. However, the high-resolution frequency response requires a huge amount of computational load, which makes the real-time graphic visualization of frequency response impossible. In order to solve the problem of computational load, the proposed method utilizes a low-resolution virtual frequency response in the mid band. It first computes the virtual frequency response of each filter of EQ in the mid band, and then moves it to the target band so that the result corresponds to the desired filter response. Then, it determines the final frequency response of EQ by combining all filter responses. The experiments confirm that the proposed method provides the frequency response of EQ which has an equivalent shape to that computed in high frequency resolution with huge computational load.

• Environmental Engineering Research
• /
• v.17 no.2
• /
• pp.83-88
• /
• 2012

Currently, the technology of $CO_2$ capture and storage (CCS) has become the main issue for climate change and global warming. Among CCS technologies, the prediction of $CO_2$ behavior underground is very critical for $CO_2$ storage design, especially for its safety. Hence, the purpose of this paper is to model and simulate $CO_2$ flow and its heat transfer characteristics in a storage site, for more accurate evaluation of the safety for $CO_2$ storage process. In the present study, as part of the storage design, a micro pore-scale model was developed to mimic real porous structure, and computational fluid dynamics was applied to calculate the $CO_2$ flow and thermal fields in the micro pore-scale porous structure. Three different configurations of 3-dimensional (3D) micro-pore structures were developed, and compared. In particular, the technique of assigning random pore size in 3D porous media was considered. For the computation, physical conditions such as temperature and pressure were set up, equivalent to the underground condition at which the $CO_2$ fluid was injected. From the results, the characteristics of the flow and thermal fields of $CO_2$ were scrutinized, and the influence of the configuration of the micro-pore structure on the flow and scalar transport was investigated.