• 한국방사선학회논문지
• /
• 제17권6호
• /
• pp.985-991
• /
• 2023

온열치료의 품질관리를 위해서 조직등가 팬텀이 필요하다. 그러나 이를 위한 팬텀이 없어 한천으로 만든 팬텀이 여러 연구에서 사용되고 있다. 본 연구에서는 한천 팬텀의 조직등가 특성을 조직등가 물질 볼루스와 비교하여 확인하였다. 한천 팬텀과 볼루스의 CT 영상을 획득하고 영상분석과 전산화 치료계획 시스템을 이용한 선량계산으로 조직등가 특성을 확인하였다. 평균 픽셀값은 볼루스에서 96.960 ± 10.999, 3% 한천 팬텀에서는 108.559 ± 8.233, 4% 한천 팬텀에서 111.844 ± 8.651의 값을 보였다. 6 MV 엑스선을 SSD 기법으로 1.5 cm 깊이에 100 cGy를 처방하여 10×10cm²로 조사하여 빔의 중심축에서 깊이에 따른 흡수선량을 계산하였다. 볼루스, 3% 한천 팬텀, 4% 한천 팬텀의 심부선량분포의 급내상관계수는 0.979(p<.001, 95%CI .957-.991)로 나타났다. 흡수선량을 계산한 지점의 밀도(g/cm³)는 볼루스에서 0.990 ± 0.020, 3% 한천 팬텀에서 1.018 ± 0.020, 4% 한천 팬텀에서 1.035 ± 0.024로 나타났다. 본 연구에서 CT영상의 분석과 전산화 방사선치료계획 시스템을 이용해 한천 팬텀의 내부 밀도 분포와 균일도가 조직등가 물질로서 적절함을 확인하였다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2000년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 2000
• /
• pp.98-107
• /
• 2000

Free-field ground motion during earthquake is significantly affected by the local site conditions and it is essential for the seismic design to perform the ground response analysis In this study, ground response analyses based on the equivalent linear method were carried out to evaluate the effects of various ground conditions on the site amplification. Four major factors including the depth of the site(very soft and dense soil), the impedance ratio between soil layer and bed rock, linear analysis versus equivalent linear analysis, and the location of soft soil layer were deeply discussed. Based on the analysis results, the importance of various local site conditions on the site amplification was emphasized.

• Radiation Oncology Journal
• /
• 제7권1호
• /
• pp.133-140
• /
• 1989

Three-dimension paraffin compensator was designed to construct the tissue equivalent compensator for irregular body contours and obiliques beam incidence. The ratio of compensator thickness to tissue deficit was depended on field size, depth and air gap because the scattered dose loss. The ratio of compensator-tissue was optimized 0.79, 0.73, 0.61 and 0.56 in 6MV x-rays as function of field size $4{\times}4$, $10{\times}10$, $20{\times}20$ and $30{\times}30cm^2$ respectively. in our study. Using this tissue equivalent compensator, it can be got 2% difference of dose at same mid-plane in phantom study.

• Journal of the Optical Society of Korea
• /
• 제19권2호
• /
• pp.182-187
• /
• 2015

This paper presents a new graphical method for selecting a pair of optical glasses to simultaneously achromatize and athermalize an imaging lens made of materials in contact. An athermal glass map that plots thermal glass constant versus inverse Abbe number is derived through analysis of optical glasses and plastic materials in visible light. By introducing the equivalent Abbe number and equivalent thermal glass constant, although it is a multi-lens system, we have a simple way to visually identify possible optical materials. Applying this method to design a phone camera lens equipped with quarter inch image sensor having 8-mega pixels, the thermal defocuses over $-20^{\circ}C$ to $+60^{\circ}C$ are reduced to be much less than the depth of focus of the system.

• 소성∙가공
• /
• 제11권6호
• /
• pp.503-512
• /
• 2002

The drawbead is used to control material flow into the die during the binder wrap process and the stamping process in the sheet metal forming process. Since the dimension of drawbead is relatively small in comparison with the typical dimensions, it is difficult to include drawbeads in finite element analysis of the sheet metal forming process. It is because the mesh system has to be fine enough to describe the drawbead and the computation time is drastically increased. In this paper, simulation of drawbead forming has been carried out to obtain the equivalent boundary conditions in the binder wrap process and the stamping process. In order to investigate the effect of various die geometries, parameter studies are performed with the variation of parameters such as the blank length, the drawbead depth, the drawbead radius, the inclination of die and the friction coefficient.

• Steel and Composite Structures
• /
• 제38권3호
• /
• pp.281-291
• /
• 2021

An equivalent single-layer theory (EST) is put forward for analyzing free vibrations of steel-concrete composite beams (SCCB) based on a higher-order beam theory. In the EST, the effect of partial interaction between sub-beams and the transverse shear deformation are taken into account. After using the interlaminar shear force continuity condition and the shear stress free conditions at the top and bottom surface, the displacement function of the EST does not contain the first derivatives of transverse displacement. Therefore, the C0 interpolation functions are just demanded during its finite element implementation. Finally, the EST is validated by comparing the results of two simply-supported steel-concrete composite beams which are tested in laboratory and calculated by ANSYS software. Then, the influencing factors for free vibrations of SCCB are analyzed, such as, different boundary conditions, depth to span ratio, high-order shear terms, and interfacial shear connector stiffness.

• 한국의학물리학회지:의학물리
• /
• 제9권4호
• /
• pp.195-200
• /
• 1998

연구 목적: 등가면법은 장방형의 X-선 조사면의 출력인자 계산에 널리 이용되고 있다. 본 연구에 서는 출력인자 계산시 등가면법의 적용에 영향을 줄 수 있는 선질, 조사면의 두 변의 길이의 비, 측정점의 깊이 등을 조사하였다. 또한 등가면법의 타당성이 유지되는 영역을 밝히는 어림계산법을 제시하였다. 대상 및 방법 : 본 연구에 사용된 X-선의 선원은 4-, 6-, l0-MV 이었다. 조사면의 폭을 5-40 cm 까지 변화시키고 각 조사면에서 두 변의 비를 1:1 에서 10:1 까지 변화시켰다. 조사면의 장방효과는 물팬톰을 이용하였으며, dmax, 5-cm, 10-cm 깊이에서 시행하였다. 장방형의 조사면과 각 조사면에 대한 등가정사각형면에서의 출력인자를 구하여 이들 두 방법에서의 차이를 나타냈다. 결과 및 토의: 장방형의 조사면과 이에 대응하는 등가면 간의 출력인자의 차이는 일반적으로 장방비가 커질수록 증가하였다. 장방형의 조사면에 대한 출력인자의 측정값은 일반적으로 각 조사면의 등가정사각형면을 이용하여 계산한 값보다 높게 나타나서 크게는 10%의 차이를 나타냈다. 똑같은 두 변의 비에 대하여 장방형의 조사면과 둥가정사각형면에 대한 출력인자의 차이는 조사면의 크기가 작을수록 크게 나타났다. 실험에 사용한 각각에서 선질의 종류와 각각의 선질에서 측정깊이에서 두 값은 큰 차이를 보이지 않았다. 결론 : 본 연구결과에 의하여 등가면법을 출력인자 계산에 사용할 경우 이를 판단할 어림계산법을 구할 수 있다. 한 변의 길이가 25-cm 이하인 조사면에 대하여 만일 장방비 < (0.48) (긴 변의 길이) - 0.5를 만족하는 경우에는 출력인자의 오차를 2% 안에서 등가면법을 이용할 수 있다. 이와는 다른 경우에는 출력인자를 직접 측정하여야 한다. 이러한 기준은 4-10MV X-선원에 대하여 10-cm 깊이의 측정점까지 타당하다.

• Geomechanics and Engineering
• /
• 제21권2호
• /
• pp.201-206
• /
• 2020

A stress-induced brittle failure in deep tunneling generates spalling and slabbing, eventually causing a v-shaped notch formation. An empirical relationship for the depth of the notch to the maximum tangential stress assuming an equivalent circular cross-section was proposed (Martin et al. 1999). While this empirical approach has been well recognized in the industry and used as a design guideline in many projects, its applicability to a non-circular opening is worth revisiting due to the use of equivalent circular profile. Moreover, even though the extent of the notch also contributes to notch failure, it has not been estimated to date. When the estimate of both the depth and the extent of notch are combined, a practical and economically justifiable support design can be achieved. In this study, a new methodology to assess the depth as well as the extent of notch failure is developed. Field data and numerical simulations using the Cohesion Weakening Frictional Strengthening (CWFS) model were collected and correlated with the three most commonly accepted failure criteria (σ₁/σ₃, D_is=σ_max/σ_c, σ_dev/σ_cm). For the numerical analyses, the D-shaped tunnel was used since most civil tunnels are built to this profile. Inferential statistical analysis is applied to predict the failure range with a 95% confidence level. Considering its accuracy and simplicity, the new correlation can be used as an enhanced version of failure assessment.

• 한국안전학회지
• /
• 제30권6호
• /
• pp.63-69
• /
• 2015

In this study, a 2D hydrodynamic model equipped with critical dry depth scheme was developed to reproduce the flow over staircase. The channel geometry of hydraulic experiment conducted by Ishigaki et al. was generated in the computational space, and the developed model was validated against flow properties such as discharge, velocity and momentum. In addition, the water surface profile and the velocity distribution evolved in flow over two layers staircases were analyzed. When the initial water depth at the upper floor was 0.3 m, the maximum velocity at lower floor was 4.2 m/s, and the maximum momentum was $1.2m^3/s^2$, and its conversion to force per unit width was 1.2 kN/m. This value was equivalent to the hydrostatic force with 50 cm water depth, and evacuation became difficult, as proposed by Ishigaki et al. For the flow over staircases connecting two layers, the maximum run-up height in flat part connecting two layers was approximately two times higher than the initial water depth in upper floor, and the rapid shock wave with sharp front and long tail was propagated.

• 한국정밀공학회지
• /
• 제19권4호
• /
• pp.101-108
• /
• 2002

A specially-built EMM (Electrochemical Micro Machining) / PECM (Pulse Electrochemical Machining) cell, a electrode tool filled with non-conducting material, a electrolyte flow control system and a small & stable gap control unit are developed to achieve accurate dimensions of recesses. Two electrolytes, aqueous sodium nitrate and aqueous sodium chloridc arc applied in this study. The farmer electrolyte has better machine-ability than the latter one because of its appropriate changing to the transpassive state without pits on the surface of workpiece. It is easier to control the machining depth precisely by micrometer with pulse current than direct current. This paper also presents an identification method for the machining depth by in-process analysis of machining current and inter electrode gap size. The inter electrode gap characteristics, inc1uding pulse current, effective volumetric electrochemical equivalent and electrolyte conductivity variations, are analyzed based on the model and experiments.