• Microbiology and Biotechnology Letters
• /
• v.51 no.4
• /
• pp.416-424
• /
• 2023

Replacing synthetic additives to preserve food products with natural antimicrobial compounds needs to be considered due to public health. In the present study, the phenolic extract from mango seed kernel (MSK) with the total phenolic content (TPC) value of 5300 ± 380 mg gallic acid equivalent (GAE)/L was used for evaluating the antimicrobial properties against five types of bacterial strains, including Listeria monocytogenes, Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus, and Salmonella typhimurium in vitro. This extract was also used for in situ method on the storage of Pangasianodon hypophthalmus fish fillets. The minimum inhibitory concentration (MIC) values for all tested strains were determined at an average concentration of 1325 mg GAE/L. Furthermore, the minimum bactericidal concentration (MBC) values of E. coli, S. aureus, and S. typhimurium were seen at 5300 mg GAE/L, while the extract did not show eliminations in the growth of the remaining strains. The bacterial inhibition speed of the extract illustrated that the concentration equal MIC value eliminated S. typhimurium growth after 24 h, the 4 times MIC value had remarkable effects on S. aureus growth after the 9 h of incubation, and 24 h of incubation for E. coli, L. monocytogenes, P. aeruginosa. Additionally, the MSK extract could inhibit the growth of P. aeruginosa on fish fillets in 4 days of storage. These results provide important evidence for the utilization of MSK as a natural source of antimicrobial agents in food products.

• Journal of Pharmaceutical Investigation
• /
• v.29 no.2
• /
• pp.99-103
• /
• 1999

Self-Emulsifying System(SES), an isotropic mixture of oil and surfactant which forms oil-in-water emulsion, is expected to improve in vitro drug dissolution and enhance in vivo drug absorption. A poorly water soluble drug, ibu-profen(IBP) was incorporated into the SES to improve absorption, and enhance bioavailability of drug. Medium chain triglyceride, glyceryl tricaprylate(GTC) as an oil, and Tween 85 as a surfactant were used to formulate SES. To characterize SESs with various concentrations of Tween 85, the phase separation and solubility of IBP-SEDDS containing IBP as a function of Tween 85 concentration were conducted, and the particle size was measured using photon correlation spectroscopic method. The SES with optimal concentration of Tween 85(35%(w/w)) was selected based on its high drug loading, small particle size and low surfactant concentration. After an oral administration of IBP-SEDDS and IBP suspension in methyl cellulose equivalent to 40.0 mg/kg to rats, the pharmacokinetic parameters were compared. The $C_{max}(163.17\;vs\;88.82\;{\mu}g/ml)$, $AUC(12897.01\;vs\;8751.13\;{\mu}g\;min/ml)$ and Bioavailability(86.44 vs 58.65%) significantly increased but $T_max(10\;vs\;20\;min)$ was significantly advanced. The current SEDDS containing IBP provide an alternative to improve an oral bio-availability of IBP.

• Journal of the Korean Applied Science and Technology
• /
• v.23 no.2
• /
• pp.160-168
• /
• 2006

The conductances of trimethyltetradecylammonium bromide (TTAB) plus triphenyltetradecyl phosphonium bromide (TTPB) and TTAB plus trimethylhexadecylammonium bromide (HTAB) over the entire mole fraction range of TTAB were measured in water and in cyclodextrin plus water mixtures at fixed 4 and 8 mM of cyclodextrin at $30^{\circ}C$. The conductivity plot for both binary mixtures shows a single break from which the mixed critical micelle concentration and degree of micelle ionization were computed. From the slope of the conductivity curve, the equivalent ionic conductivities of the monomeric, associated, and the micelle states were calculated and discussed with respect to the surfactant-cyclodextrin complexation in the whole mole fraction range of both surfactant binary mixtures. The association constant K between the respective monomeric surfactant and cyclodextrin cavity of fixed 4 mM cyclodextrin was computed by considering 1:1 association from the surface tension measurement. A comparison among the K values for HTAB-cyclodetrin, TTAB-cyclodextrin, and TTPB-cyclodextrin shows that the former complexation is significantly stronger in comparison to the other ones due to the longer hydrophobic tail.

• Journal of Korean Society on Water Environment
• /
• v.21 no.5
• /
• pp.516-519
• /
• 2005

An useful protocol coiled load duration curve methodology to estimate contaminant loading to a river on an exceedance probability scale was developed in this research. The technique was further applied to estimate total coliform loading to the Geum River, using the daily mean flow rate and total coliform concentration data during January, 1996 and July, 2004 for the Gongju where an automated monitoring station is located. Drought flow of the Gongju (=50.3 cms) was equivalent to 40% on an exceedance probability scale. Load duration curve for total coliform loading at the Gongju was constructed. Standard duration curve was constructed with the water quality criteria for the class 2 (total coliform concentration = 1000 MPN/100 mL). By plotting load duration curve with standard duration curve, it could be revealed that water quality do not meet the desired water quality for 47% on an exceedance probability scale. If linearity between flow rate and coliform concentration is assumed, it can be interpretated that water quality exceeds desired criteria when average mean flow rate is over 51 cms.

• Journal of Korean Society for Atmospheric Environment
• /
• v.21 no.3
• /
• pp.285-293
• /
• 2005

This study was aimed at estimation of gas-particle partitioning of polychlorinated biphenyls (PCBs) in ambient air. The samples were collected at urban site in Japan from March 2002 to January 2003. The concentration of total PCBs (from 4 CB to 10 CB) and TEQ (Toxic equivalent) ranged from 62 to $247\;pg/m^3$ and from 2 to $14\;fgTEQ/m^3 $, respectively. The average contribution $(\%)$ of gas phase to total PCBs concentration was above $80\%$, which suggests that in the atmosphere PCBs predominantly existed in the gas phase. The weak correlations between total PCBs concentration and temperature was found. However this result was due to a typhoon during summer and raining during sampling period. The gas-particle partition coefficient (Kp) was obtained as a function of temperature. The partition ratio of gaseous and particulate phase PCBs can be estimated for an arbitrary temperature. The plot of gas/particle partition coefficient (log Kp) vs. sub-cooled liquid vapor pressure $(log\;P_L)$ had reasonable correlations for individual samples but the slope varied among the samples (coefficients of determination for log Kp versus log $P_L$ plot were> 0.76 $(p<0.0001)$, except for 3 samples). As a result, the variations in the slope among the sampling period may be due to change of temperature, raining during sampling period and wind in this study.

• Journal of the Korean Wood Science and Technology
• /
• v.25 no.1
• /
• pp.23-27
• /
• 1997

Alkali-soluble extracts were prepared from barks of Japanese larch(Larix leptolepis). Siberian larch(Larix gmelineii) and Radiata pine(Pinus radiata) The effect of various factors, such as particle size, liquor ratio, extraction temperature, and reaction time, on the extracts yield was investigated. Particle sizes affected the alkali-soluble extracts; the finer the particle size, the higher extracts and extract efficiency. High temperature and high liquor ratio were more effective. In the range of 0.25% to 1% NaOH concentration, alkali extracts were increased with the increasing alkali concentration. However, extract yields were leveled off above 0.5% alkali concentration. Extractions with NaHCO3 were almost equivalent to those of NaOH extraction. 1% NaOH and 1% NaHCO3 resulted in the highest yields of alkaline extracts. Extracts from Japanese larch were lower than those from Siberian larch and Radiata pine barks. Siberian larch bark was the best raw material for tannin adhesives, because its extractive yield was higher than those of the other barks. Concerning pH of alkaline media during extraction, small increases of the extract yields were resulted at range of pH 7 to pH 9, while a large increases from pH 9.0 to pH 12. This phenomenon is attributed to higher alkalinity.

• Food Science and Biotechnology
• /
• v.18 no.2
• /
• pp.449-455
• /
• 2009

The antioxidant properties of water extracted polysaccharides (PW), 1%(w/v) NaOH extracted polysaccharides (PN1), and 5%(w/v) NaOH extracted polysaccharides (PN5) were assessed in this paper. PW showed good capability of scavenging $H_2O_2$, anti-lipid peroxidation, reduction power, and scavenging 1,1-diphenyl-2-picrylhydrazyl (DPPH). The maximum values were all observed at the dose of 1 mg/mL sample. As far as the antioxidant activities of PN1 were concerned, the capability of scavenging superoxide radical, chelating metal, and total antioxidation showed higher than those of PN5. When polysaccharide concentration was 1 mg/mL, the 3 index described above were attached 71.8%, 51.6%, and $446.3{\mu}M$ Trolox equivalent, respectively. With respect to PN5, higher capabilities of scavenging hydroxyl free radicals were obtained while the peak of 84.8% was observed at the concentration of 1.0 mg/mL. Moreover, the concentration-dependent influences were characterized in all cases.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.9
• /
• pp.2181-2193
• /
• 1995

The effective elasticity and conduction of composite materials containing arbitrarily oriented multiple phases has been analyzed using the concept of orientation-dependent average fields and concentration factors. The analysis provided closed form expressions for the effective stiffnesses and conductivities. Under the prescribed boundary conditions, the concentration factors were evaluated by the equivalent inclusion principle, through which the interaction between various phases is approximated by the Mori-Tanaka mean-field approximation. SiC particulate(SiC$_{p}$) reinforce aluminum(Al) matrix composites were fabricated and their elastic constants and electrical conductivities were measured together with a careful study of their microstructure. The measured properties showed a systematic anisotropy and this behavior could be attributed to the preferred orientation of SiC$_{p}$. The theoretical model developed was applied to the computation of the anisotropic properties of these composites. Both two-phase and three-phase composites were considered based on the microstructural information. The SiC$_{p}$ was modeled as an ellipsoid with planar random orientation distribution in the extruded Al/SiC$_{p}$ composites. The effect of extraneous phase such as intermetallic compounds was also investigated.tigated.

• Membrane Journal
• /
• v.9 no.2
• /
• pp.107-113
• /
• 1999

Alcohol concentration via pervaporation process was performed by using commercial PDMS(polydimethylsiloxane) composite membrane and plasma treated PP(polypropylene) membranes. Effects of operating parameters of pcrvaporation process were examined. With the increase of butanol concentration in the feed, flux and selectivity increased due to the greater affinity of butanol with PDMS than that of water. As the operating temperature increased, free volume as well as the solubilities and diffusivities of alcohol and water increased to result in the greater flux and less selectivity of the membrane. As solubility parameter difference between alcohol and PDMS membrane decreased, high flux and good selectivity were obtained. When PP membrane was plasma treated with methanol, it has 6 times greater flux than PDMS membrane with equivalent separation factor. With the increase of plasma treatment time, flux and selectivity were enhanced. However, excess treatment time caused pore blocking to result in the flux decrease.

• Transactions of the Korean hydrogen and new energy society
• /
• v.21 no.2
• /
• pp.136-142
• /
• 2010

Photobiological $H_2$ production was compared using purple non-sulfur bacteria Rhodobacter sphaeroides KD131 in the medium containing various organic acids as the carbon source and electron doner under illumination of $110\;W/m^2$ using halogen lamp at $30^{\circ}C$. The organic acids used were 0~120 mM acetate, butyrate, lactate and malate. Initial pH 7.0 and cell concentration 1.0 at 660nm were increased to pH 8 and 4.4~5.1, respectively during 24hrs of photo-fermentation when lactate and malate were used. However, acetate and butyrate increased pH to 9 and cell concentration to 3.2~3.9 of malate at the same experimental conditions. Optimum ranges of organic acids concentration and carbon/nitrogen ratio were 30~60 mM and 10~20, respectively. When malate was used as the substrate, maximum $H_2$ production 1.1 ml $H_2$/ml broth, which is equivalent to 1.97 mol $H_2$/mol malate was observed.