• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1991년도 가을 학술발표회 논문집
• /
• pp.51-58
• /
• 1991

In staically indeterminate structures torsional stiffness is an important factor for prediction of mechanical behavior at all loading stages in reinfored concrete beams, which also for calculation of torsional moment. This paper proposes equation for postcracking torsional stiffness of reinforced concrete beams under pure torsion, which is derived considering the equilibrium and compatibility condition for shear panel based on the variable angle space truss model. The equation describes well the effect according to the variation of aspect ratio and steel volume ratio per unit concrete volume. It agress with experimental results in this paper as well as available literature.

• Structural Monitoring and Maintenance
• /
• 제7권4호
• /
• pp.295-317
• /
• 2020

Investigation of the stability of arch dam abutments is one of the most important aspects in the analysis of this type of dams. To this end, the Bakhtiari dam, a doubly curved arch dam having six wedges at each of its abutments, is selected. The seismic safety of dam abutments is studied through time history analysis using the design-based earthquake (DBE) and maximum credible earthquake (MCE) hazard levels. Londe limit equilibrium method is used to calculate the stability of wedges in abutments. The thrust forces are obtained using ABAQUS, and stability of wedges is calculated using the code written within MATLAB. Effects of foundation flexibility, grout curtain performance, vertical component of earthquake, nonlinear behavior of materials, and geometrical nonlinearity on the safety factor of the abutments are scrutinized. The results show that the grout curtain performance is the main affecting factor on the stability of the abutments, while nonlinear behavior of the materials is the least affecting factor amongst others. Also, it is resulted that increasing number of the contraction joints can improve the seismic stability of dam. A cap is observed on the number of joints, above which the safety factor does not change incredibly.

• 공업화학
• /
• 제24권3호
• /
• pp.327-332
• /
• 2013

입상 활성탄에 대한 bismarck brown R의 흡착평형, 동력학 및 열역학 파라미터들을 회분식 실험을 통해 살펴보았다. 조작변수로서 초기농도, 접촉시간과 흡착온도의 영향을 조사하였다. 흡착평형자료는 선형회귀법을 사용하여 Langmuir와 Freundlich 흡착등온식에 대한 적합성을 평가하였다. 흡착평형은 Freundlich 흡착등온식이 더 잘 맞았으며, 계산된 분리계수(1/n) 값으로부터 입상 활성탄이 bismarck brown R을 효과적으로 처리할 수 있다는 것을 알 수 있었다. 동력학적 실험으로부터, 흡착공정은 유사이차반응속도식에 잘 맞으며, 속도상수($k_2$) 값은 온도가 증가할수록 증가하였다. 활성화에너지, 엔탈피, 엔트로피 및 Gibbs 자유에너지변화와 같은 열역학 파라미터들은 흡착공정의 특성을 평가하기 위하여 298~318 K의 온도 범위에서 조사하였다. 활성화 에너지의 계산값은 100 mg/L에서 8.73 kJ/mol로 입상 활성탄에 대한 bismarck brown R의 흡착이 물리적 공정임을 나타냈다. Gibbs 자유에너지변화의 음수값(${\Delta}G$ = -2.59~-4.92 kJ/mol)과 엔탈피변화의 양수값(${\Delta}H$ = +26.34 kJ/mol)은 흡착공정이 자발적이며 흡열과정으로 일어난다는 것을 나타냈다.

• 대한지질공학회:학술대회논문집
• /
• 대한지질공학회 2003년도 정기총회 및 학술발표회
• /
• pp.153-158
• /
• 2003

Traditionally, the statistical methods has been used to analyze the relationship between landslide occurrence and related factors(soil depth, soil strength, slope angle, vegetation, etc.) in GIS technique. However, the method have no mechanical meaning. Therefore, the mechanical model is suggested in this research. The method analyzes the mechanical equilibrium of a potential slide block and then calculates a slope safety factor. Since this method is able to consider the balance of forces applied to the slope and is a more reasonable method for an individual site. In this research, the spatial data is obtained, managed and analyzed using GIS technique, and the infinite slope model is used to evaluate factor of safety and analyze the slope stability.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.223-228
• /
• 2000

The current slope stability analysis of a filldam is based on the limit equilibrium method, and in calculation of safety factor during earthquake, adopts the seismic intensity method in which it considers a uniform seismic force from dam foundation to crest. However the observed behaviour of filldam during earthquake shows some different behaviour in that at the crest the measured acceleration is usually several times the ground acceleration. In this study, slope stability calculations of a filldam are provided based on the modified seismic intensity method, which can take into account the amplification phenomena of acceleration in the upper part of dam. And also the results of calculations are compared with that of current seismic intensity method.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.565-573
• /
• 2004

This study is to present explicit analytical expressions for calculating bearing capacity factor $N_{\gamma}$, to provide results of the numerical computation instead of the graphical method. In this study, $N_{\gamma}$ is proposed in the critical failure surface on assumption that the center of log spiral in the radial shear zone can be located at the any points of around footing. The critical failure surface is one which yields minimum passive pressure $P_{\gamma}$ on the radial shear zone from the family of log spirals accoding to change of the center of log spiral. This study adoptes Terzaghi's bearing capacity principle(e.g., Prandtl's mechanism, limit equilibrium equation, superposition principle) but the soil wedge in an elastic zone makes angle $45^{\circ}+{\phi}/2$ with the horizontal and the location of the log spiral's center.

• 한국건축시공학회지
• /
• 제4권3호
• /
• pp.101-108
• /
• 2004

The physical factor having a great influence among components of making values of profit model in apartment houses is equilibrium change of house and this study suggests an alternative of remodelling. It sets profit models including model dividing household of large scale into that of small scale using value making factor of apartment house and spatial composition techniques and model integrating households of small scale and converting them into those of large scale and finds that its economy is good as over 'average', evaluative value of economy is reduced as discount rate increases and economy of remodelling is superior.

• Geomechanics and Engineering
• /
• 제14권4호
• /
• pp.325-336
• /
• 2018

Deformation of rock masses is not only related to rock itself, but also related to discontinuities, the latter maybe greater. Study on crack propagation at discontinuities is important to reveal the damage law of rock masses. DDARF is a discontinuous deformation analysis method for rock failure and some modified algorithms are proposed in this study. Firstly, coupled modeling methods of AutoCAD-DDARF and ANSYS-DDARF are introduced, which could improve the modeling efficiency of DDARF compared to its original program. Secondly, a convergence criterion for automatically judging the computation equilibrium is established, it could overcome subjective drawbacks of ending one calculation by time steps. Lastly but not the least, relationship between the super relaxation factor and the calculation convergence is analyzed, and reasonable value range of the super relaxation factor is obtained. Based on these above modified programs, influences on crack propagation of joint angle, joint parameters and geo-stresses' side pressure are studied.

• 대한화학회지
• /
• 제20권6호
• /
• pp.448-452
• /
• 1976

간단한 통계역학적 방법을 사용 수화된 이온의 완화시칸, 탈수화시의 활성화, 에너지, 탈수화율 등을 계산하였다. 구상한 model에 의하면 수화된 물과 탈수화된 물 간의 평형상수, 물-이온간 에너지 항, 각종 species 간의 혼합 factor들이 들어있다. 이론과 실험은 잘 맞는 겨로가를 보이고 있다. 또한 이온이 탈수화식의 압력의 영향도 아울러 논의하였다.

• 약학회지
• /
• 제39권1호
• /
• pp.1-5
• /
• 1995

As a continuation of the previous study, a second group of sixty two aqueous extracts(freeze dried) from natural products was screened for the inhibitory effect of platelet activating factor(PAF) binding to rabbit platelet using 0.6 nM [$^{3}$H]PAF as a radioligand. The results demonstrated that three medicinal plants inhibited 40~50% of [$^{3}$H]PAF equilibrium binding at the concentration of 200 $\mu\textrm{g}$/ml.