• Journal of Radiation Protection and Research
• /
• 제26권4호
• /
• pp.399-408
• /
• 2001

일반가옥 및 실험실에서 라돈농도, 평형등가농도 및 평형인자의 농도 변화를 검토하였으며, 환기조건에 따른 평형인자, 비흡착 라돈자손 비율의 변통 특성을 검토하였다. 가옥 7개 지점에서의 평균 라돈농도, 평형등가농도 및 평형인자는 각각 $30\;Bq\;m^{-3},\;19.6\;Bq\;m^{-3}$, 0.65였다. 한편, 실험실 3개 지점에서의 평균 라돈농도, 평형등가농도 및 평형인자는 각각 $55.0\;Bq\;m^{-3},\;31.9\;Bq\;m^{-3}$, 0.58였다 실내에서의 라돈농도, 평형등가농도 및 평형인자는 새벽 및 아침시간에 높고 오후 4시부터 밤 10시 사이에 낮아지는 주기적인 특성을 나타내었다 환기상태가 좋은 경우가 환기상태가 나쁜 경우에 비해 평형인자는 낮아지는 반면, 비 흡착 라돈자손 비율이 증가하는 경향을 나타내었으며, 평형인자는 기압, 습도에 비례하는 반면, 온도에는 반비례하는 관계를 나타내었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1243-1248
• /
• 2010

Fatigue design and evaluation of welded joints are typically carried out by weld classification approach in which a family (theoretically infinite) of parallel nominal stress based S-N curves are used according to joint types and loading modes as well as extrapolation-based hot spot stress. Traditional finite element methods are not capable of consistently capturing the stress concentration effects on fatigue behavior due to their mesh-sensitivity in stress determination at welds resulted from notch stress singularity. The extrapolated hot spot stresses tend vary, depending on the element sizes, types, joint types, and loading mode. however, the equilibrium-equivalent structural stress method(E2S2) has been recently developed through several joint industry projects as a robust method to analyze welded components using finite element analysis. This method has been proven effective in correlating a large amount of published fatigue test results in the literature such as master S-N curve and has used for evaluating the fatigue life of welding components. In this study, fatigue analysis of the welding bogie frame is examined using E2S2 method with master S-N curve.

• 한국해안해양공학회지
• /
• 제1권1호
• /
• pp.44-49
• /
• 1989

점성토의 퇴적현상에는 여러가지 물리화학적 인자가 작용하기 때문에 최근까지의 연구경향은 주로 현장관측이나 수리실험에 의존하고 있는 실정이다. 본 연구에서는 금강하구에서 채취한 시료를 사용하여 정성토의 침식 및 퇴적에 관한 개수로 실험을 하였다. 침식에 대한 실험에서는 여러가지 수리조건에서의 시간에 따른 부유농도 변화를 측정하여 침식률 및 침식계수를 구하여 침식에 대한 한계소류력을 결정하였으며, 퇴적에 대한 실험에서는 수리조건을 변화시키면서 각 소류력에 대한 평형농도를 결정하여 평형농도와 초기농도와의 비와 소류력과의 관계를 얻었다. 본 연구의 결과를 다른 자료와 비교 검토하여 정상적으로 유사한 경향을 나타내고 있음을 알 수 있었다.

• Journal of Radiation Protection and Research
• /
• 제45권3호
• /
• pp.95-100
• /
• 2020

Background: Compared with reported data of radon concentration, data of radon progeny concentration is limited in general, especially in outdoor environment. Materials and Methods: To know both the level and the variation of radon progeny concentration in outdoor environment in Beijing area, one-year continuous measurement with a cycle of 60 minutes was carried out by a step-advanced filter (SAF) monitor for radon progeny measurement. The observation site was located in a park in Eastern Beijing area, and the observation period was from October 17, 2018 to September 29, 2019. Results and Discussion: The equivalent equilibrium concentration (EEC) of radon progeny varies from 0.7 to 19.1 Bq·m^-3, with an annual average of 4.9 ± 2.7 Bq·m^-3. A clear diurnal variation of EEC, higher in the early morning and lower in the late afternoon, is observed due to the high sensitivity of the SAF monitor. Conclusion: Vertical convection of atmospheric boundary layer is thought to be the main reason of this phenomenon. For annual variation, the lowest monthly average EEC appeared in April, while the highest appeared in November, which might attribute to the atmospheric stability in different seasons.

• Bulletin of the Korean Chemical Society
• /
• 제30권5호
• /
• pp.1031-1034
• /
• 2009

Fluorescence of quinolones including norfloxacin, ciprofloxacin and S- and R-ofloxacin is quenched upon association with single and double-stranded DNA (ss- and ds-DNA). The ratios of fluorescence intensity in the presence of DNA to its absent were plotted with respect to the DNA concentration to construct the Stern-Volmer plot. The slope of the Stern-Volmer plot become larger as the temperature is lowered, ensuring that the fluorescence quenching is static process, i.e., the fluorescence is quenched by formation of the non-fluorescent complex between quinolone and DNA. In the static quenching mechanism, the quenching constant which is equivalent to the slope of the Stern-Volmer plot, is considered as the equilibrium constant for the association of quinolones and DNA. From the temperature-dependent equilibrium constant, ${\Delta}H^0\;and\;{\Delta}S^0$ was obtained using the van’t Hoff relation. In general, association of the quinolone with ds- as well as ss-DNA is energetically favorable (an exothermic) process while the entropy change was unfavorable. Due to the steric effect of the substituents, the effect of the quinolone ring is smaller on the ss-DNA compared to ds-DNA.

• 한국해양공학회지
• /
• 제29권1호
• /
• pp.45-55
• /
• 2015

Because of the high stress concentration near the toe of a welded joint, the calculation of local stress using the finite element method which is relevant to the fatigue strength of the weld toe crack, is a challenging task. This is mainly caused by the sensitivity of finite element analysis, which usually occurs near the area of a dramatically changing stress field. This paper presents a novel numerical method through which a less mesh-sensitive local stress calculation can be achieved based on the 3D solid finite element, strictly sticking to the original definition of hot spot stress. In order to achieve the goal, a traction stress, defined at 0.5t and 1.5t away from the weld toe, was calculated using either a force-equivalent or work-equivalent approach, both of which are based on the internal nodal forces on the imaginary cut planes. In the force-equivalent approach, the traction stress on the imaginary cut plane was calculated using the simple force and moment equilibrium, whereas the equivalence of the work done by both the nodal forces and linearized traction stress was employed in the work-equivalent approach. In order to confirm the validity of the proposed method, five typical welded joints widely used in ships and offshore structures were analyzed using five different solid element types and four different mesh sizes. Finally, the performance of the proposed method was compared with that of the traditionally used surface stress extrapolation method. It turned out that the sensitivity of the hot spot stress for the analyzed typical welded joints obtained from the proposed method outperformed the traditional extrapolation method by far.

• Nuclear Engineering and Technology
• /
• 제29권4호
• /
• pp.299-309
• /
• 1997

The neutronic feasibility of typical Korean three-loop 900MWe class PWR core loaded with mixed oxide fuels for both annual and 18-month cycle strategies has been investigated as a means for spent fuel management. For this study, a method of determining equivalent plutonium content was developed under the equivalence concept which gives the same cycle length as uranium fuel. Optimal plutonium zoning within the MOX assembly was also designed with the aim of minimizing the peak md power. Conceptual core designs hate hen developed for equilibrium cycle with the following variations: annual and 18-month cycle, 1/3 and full MOX loading schemes, and typical and high moderation lattice. The analysis of key core physics parameters shows that in all cases considered satisfactory core designs seem to be feasible, though addition of control rod system and change in Technical Specification for soluble boron concentration are required for full MOX loading in order to meet the current design requirements.

• 한국환경과학회지
• /
• 제20권5호
• /
• pp.555-564
• /
• 2011

This study examines the potential restoration of abandoned channels of the Mangyeong River in South Korea. To analyze the morphological changes and equilibrium conditions, a flow duration analysis was performed to obtain the discharge of 255 m3/s with a recurrence interval of 1.5 year. It is a gravel-bed stream with a median bed diameter of 36 mm. The reach-averaged results using HEC-RAS showed that the top width is 244 m, the mean flow depth is 1.11 m, the width/depth ratio is very high at 277, the channel velocity is 1.18 m/s, and the Froude number is also high at 0.42. The hydraulic parameters vary in the vicinity of the three sills which control the bed elevation. The total sediment load is 6,500 tons per day and the equivalent sediment concentration is 240 mg/l. The Engelund-Hansen method was closer to the field measurements than any other method. The bed material coarser than 33 mm will not move. The methods of Julien-Wargadalam and Lacey gave an equilibrium channel width of 83 m and 77 m respectively, which demonstrates that the Mangyeong River is currently very wide and shallow. The planform geometry for the Mangyeong River is definitely straight with a sinuosity as low as 1.03. The thalweg and mean bed elevation profiles were analyzed using field measurements in 1976, 1993 and 2009. The measured profiles indicated that the channel has degraded about 2 m since 1976. The coarse gravel material and large width-depth ratio increase the stability of the bed material in this reach.

• 한국대기환경학회지
• /
• 제26권1호
• /
• pp.94-102
• /
• 2010

Water content of $PM_{2.5}$ (particles in the atmosphere with a diameter of less than or equal to a nominal $2.5{\mu}m$) was estimated by using a gas/aerosol equilibrium model, SCAPE2, for the particles collected at Seoul and Gosan, Korea. From measured and analyzed characteristics of the particles, the largest difference between Seoul and Gosan is the proportions of total ammonia (t-$NH_3$=gas phase $NH_3$+particle phase ${NH_4}^+$), total nitric acid (t-$HNO_3$=gas phase $HNO_3$+particle phase ${NO_3}^-$) and sulfuric acid ($H_2SO_4$). Even though both sites have sufficient t-$NH_3$ to neutralize acidic species such as $H_2SO_4$, t-$HNO_3$, and t-HCl (total chloric acid=gas phase HCl+particle phase $Cl^-$), equivalent fraction of t-$NH_3$ and t-$HNO_3$ are higher at Seoul and $H_2SO_4$ is higher at Gosan. Based on the modeling result, it is identified that the $PM_{2.5}$ at Seoul is more hygroscopic than Gosan if the meteorological conditions are the same. To reduce water content of $PM_{2.5}$, and thus, mass concentration, control measures for ammonia and nitrate reduction are needed for Seoul, and inter-governmental cooperation is required for Gosan.

• 대한토목학회논문집
• /
• 제13권1호
• /
• pp.213-220
• /
• 1993

본 논문에서는 해마다 수 십만 개씩 발생되는 폐타이어의 열적 처리 방법인 건류 소각 처리 방법에서 발생되는 이차 오염 물질을 정량하여 폐타이어의 안전한 최종 처리 방법까지 고찰하였다. 건류-소각처리 방법에서 발생되는 배기 가스에서 이차 독성 오염 물질을 화학 평형 모델을 응용하여 예측하였고 실질적인 잔류 물질인 건류재와 소각재에서 유기성 독성 물질과 중금속을 정량하였다. 건류재에서는 폐타이어의 불완전 연소에 따른 유기성 이차 오염 물질이 다량 포함되어 있는 반면에 소각재에서는 납과 카드뮴과 같은 중금속 화합물의 함량이 높았다. 건류재 및 소각재의 안전한 최종 매립을 위하여는 서로 다른 전처리 방법이 요구된다.