• Applied Chemistry for Engineering
• /
• v.21 no.5
• /
• pp.509-513
• /
• 2010

Recently, an amount of waste electronic devices such as LED and trichromatic fluorescent lamp has increased with the development of electronic industry. Reportedly, rare earth metals such as yttrium and europium have been discovered in the waste electronic devices. In order to improve the selectivity of yttrium and europium, the effects of the following factors on recovery experiment have been considered : i) fatty acids with various alkyl chain lengths, ii) the concentration of extractant, and iii) pH. The results show that the extraction efficiencies decrease at the same pH with decreasing the concentration of extractant and so $pH_{0.5}$ (That value of pH in an aqueous phase at which the distribution ratio is unity at equilibrium: 50% of the solute is extracted (E = 0.5) only when the phase ratio is unity.) moves into higher pH. The highest selectivity of yttrium and europium was obtained with tetradecanoic acid as extractant. The extraction mechanism of yttrium and europium was varied with the change of concentration of the tetradecanoic acid. $MR_3$single-species was formed from the yttrium and europium ion in the extractant concentration less than 0.1 M. On the other hand, the yttrium or europium ion is solvated with three molecules of tetradecanoic acid monomer like $MR_3{\cdot}$ 3RH in the extractant concentration more than 0.1 M.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.13 no.4
• /
• pp.283-293
• /
• 2015

The buffer is a key component of the engineered barrier system in a high-level radioactive waste (HLW) repository. The present study reviewed the requirements and functional criteria of the buffer reported in literature, and also based on the results, proposed an approach to establish a buffer concept which is applicable to an HLW repository in Korea. The hydraulic conductivity, radionuclide-retarding capacity (equilibrium distribution coefficient and diffusion coefficient), swelling pressure, thermal conductivity, mechanical properties, organic carbon content, and illitization rate were considered as major technical parameters for the functional criteria of the buffer. Domestic bentonite (Ca-bentonite) and, as an alternative, MX-80 (Na-bentonite) were proposed for the buffer of an HLW repository in Korea. The technical specifications for those proposed bentonites were set to parameter values that conservatively satisfy Korea's functional criteria for the Ca-bentonite and Swedish criteria for the Na-bentonite. The thickness of the buffer was determined by evaluating the means of shear behavior, radionuclide release, and heat conduction, which resulted in the proper buffer thickness of 0.25 to 0.5 m. However, the final thickness of the buffer should be determined by considering coupled thermal-hydraulic-mechanical evaluation and economics and engineering aspects as well.

• The Journal of the Petrological Society of Korea
• /
• v.3 no.3
• /
• pp.185-195
• /
• 1994

An experimental study of iron-aluminium partitioning between synthetic garnet and synthetic epidote was carried out, as equilibrium was maintained in the exchange reaction expressed as follows : $Ca_3Fe_2Si_3O_12\+\2\Ca_2Al_2AlSi_3O_12$(0H) = $Ca_3Al_2Si_3O_12\+\Ca_2Al_2FeSi_3O_12$(0H) Temperature has a pronounced effect on the distribution of Fe and A1 between the minerals. However, the pressure effect is not so drastic as in the exchange reaction. With increasing temperature, $Fe^{+3}$ becomes redistributed from garnet into epidote, whereas A1 becomes redistributed from epidote into garnet. This is in line with the general principle of phase correspondence, as the temperature increases the more electropositive metal aluminium redistributes from epidote into garnet. The agreement between the experimental results of this study and the natural samples suggests that $K_D=X^{Ep}_{Fe}/X^{Gr}_{Fe}$ may be a useful geothermometer for metamorphic rocks containing garnet and epidote that are close to binary Fe-A1 compounds.

• Journal of Korea Water Resources Association
• /
• v.45 no.6
• /
• pp.557-568
• /
• 2012

In order to understand the hydrological processes on the mountainous forest, the configuration of soil evaporation (E) out of evapotranspiration (ET) is a challenging and important topic. In this study, we attempted to understand the soil evaporation process for a humid forest hillslope via measuring and analyzing soil moistures with a sampling interval in 2 hours at three locations for 10 days between May 22th and 31th 2009. Two methods were used to estimate soil evaporation in every 2hr; one is a method using soil moisture measurement ($E_{SM}$), the others methods are based on Penman equation (Penman (1948), Staple (1974), Konukcu (2007), Equilibrium Penman ($E_{equili}$)). As a critical parameter in determining $E_{SM}$, the dry surface layer (DSL), was estimated using energy balance equation. The accumulated soil evaporation ($E_{SM}$) of A, B, C points were estimated as 2.09, 1.08 and 2.88 mm, respectively. The estimated evaporation of Penman (1948), Staple (1974), Konukcu (2007), $E_{equili}$ were 4.91, 8.80, 8.63 and 3.28 mm. The proposed method with soil moisture measurement showed lower soil evaporations than the other conventional methods. The increasing soil temperature and interaction between soil and atmosphere due to existence of litter and DSL are considered as dominant factors for soil evaporation. The $E_{SM}$ has the apparent lag time between 2 and 4 hr compared with $E_{equili}$ and net radiation. The DSL and surface resistance ($r_s$) were increased as soil moisture was decreased for in this study. The estimated DSL through the temporal distribution analysis of soil moisture and tension measurements was also similar to that of the energy balance relationship.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.5
• /
• pp.112-120
• /
• 2012

A numerical model considering the internal vaporization and the creep effect, in the form of a analytical program, for tracing the behavior of high strength concrete(HSC) members exposed to fire is presented. The two stages, i.e., spalling procedure and fire resistance time, associated with the thermal, moisture flow, creep and structural analysis, for the prediction of fire resistance behavior are explained. The use of the analytical program for tracing the response of HSC member from the initial pre-loading stage to collapse, due to fire, is demonstrated. Moisture evaporates, when concrete is exposed to fire, not only at concrete surface but also at inside the concrete to adjust the equilibrium and transfer properties of moisture. Finite element method is employed to facilitate the moisture diffusion analysis for any position of member, so that the prediction method of the moisture distribution inside the concrete members at fire is developed. The validity of the numerical model used in this program is established by comparing the predictions from this program with results from others fire resistance tests. The analytical program can be used to predict the fire resistance of HSC members for any value of the significant parameters, such as load, sectional dimensions, member length, and concrete strength.

• KDI Journal of Economic Policy
• /
• v.34 no.2
• /
• pp.1-15
• /
• 2012

We develop an identity choice model within the context of a stereotyping-cum-signaling framework. The model allows us to explore implications of the fact that, when individuals can choose identity, then the distribution of abilities within distinct identity groups becomes endogenous. This is significant because, when identity is exogenous and if the ability distributions within groups are the same, then inequality of group reputations in equilibrium can only arise if there is a positive feedback between group reputation and individual human capital investment activities (Arrow, 1973; Coate and Loury, 1993). Here we show that when group membership is endogenous then the logic of individuals' identity choices leads there to be a positive selection of higher ability individuals into the group with a better reputation. This happens because those for whom human-capital-investment is less costly are also those who stand to gain more from joining the favored group. As a result, ability distributions within distinct groups can endogenously diverge, reinforcing incentive-feedbacks. We develop the theoretical framework that can examine the positive selection and the endogenous group formation. The model implies that inequality deriving from stereotyping of endogenously constructed social groups is at least as great as the inequality that can emerge between exogenously given groups.

• Management & Information Systems Review
• /
• v.37 no.3
• /
• pp.65-81
• /
• 2018

This study estimated the long-run and the short-run price and income elasticity of crude oil demand by using the ARDL model in Korea. First, the long-run cointegration relationship existed between crude oil demand and price or income in the ARDL-bounds tests. Second, the long-run own price, the cross price elasticity and the income elasticity were both statistically significant elastic and sensitive in the ARDL. Third, there was autocorrelation of the residuals, but no misspecification errors and heteroscedasticity, and then the residuals showed a normal distribution. And the CUSUM & CUSUMSQ tests showed that the coefficients were stable. Fourth, the short-run own price, the cross price elasticity and the income elasticity were both statistically significant elastic and sensitive in the ARDL-RECM. The ECM with the short-run dynamics showed rapid adjustments in the long-run equilibrium of oil demand after the economic crisis. In the short-run, the sensitivity of crude oil demand to price and income changes has moved in the same direction as the long-run case. Korea, depending too much on foreign crude oil, is vulnerable to the shocks of oil prices, so rising oil prices can certainly have a negative impact on Korea's trade balance. And the elasticity of long-run oil prices may help to control and manage Korea's oil demand. The government needs to strengthen monitoring of the country's policies and market trends related to crude oil, establish strategies to customize national policies and market conditions, and strengthen active market dominance efforts through pioneering new market and diversification.

• Parasites, Hosts and Diseases
• /
• v.23 no.2
• /
• pp.241-246
• /
• 1985

The epidemiological status of ascariasis was analyzed in 8 rural villages in Korea, through observation of its epidemiological parameters such as prevalence, worm burden and basic reproductive rate. Total 978 inhabitants were subjected to stool examination and recovery of worms after chemotherapy with pyrantel pamoate. The results were as follows: 1. The worm positive rate in each village was 16.5~79.5%, while the egg positive rate was 9~18% lower, 3.3~66.7%. The average worm burden (among all inhabitants) ranged from O. 21 to 8. 44 by villages and the frequency of cases with each worm burden showed negative binomial distributions with 'k' values of O. 38-0. 54. 2. The prevalence rates (worm) in each village was almost identical with the theoretical ones from Anderson and May's equation; $p=1-(1+M^*/k)^{-k}$, where 'p' is worm prevalence and '$M^*$' equilibrium average worm burden. The basic reproductive rate 'R' was calculated from 1.03 to 2.11. lt is suggested that, although 'R' in lower endemic areas is approaching to the breakpoint of reinfection (R=1), control programs of ascariasis in Korea should be continued until it becomes below the level nationwidely.

• Journal of the Korean Chemical Society
• /
• v.14 no.1
• /
• pp.65-74
• /
• 1970

Formation of the complexes of alkaline earths with citrate ions in aqueous, acetone-water and ethanol-water solutions was studied at room temperature by the equilibrium exchange technique. This technique involved the measurements of distribution of radioactivity between cation exchange resin and solution phase after the radioactive metal ions were equilibriated with the cation exchange resin in the presence of citrate ions ($Cit^{3-}$) of varying concentrations. The pH of the solutions was controlled to 7.2-7.5, and the ionic strength of the solutions was kept at 0.10-0.12. The present study revealed that both barium and strontium ions formed the one to one citrate complexes, $[M Cit]^-$ in all solvent systems examined. It was also observed that calcium ions formed the one to one citrate complex in aqueous solution. In acetone-water and ethanol-water solutions, however, calcium ions were observed to form both one to one and one to two complexes, $[Ca Cit]^-$ and $[Ca\;Cit_2]^{4-}$. The results of the present study indicated also that relative stabilities of the complexes increased in the order; $Ba^{++}\;<\;Sr^{++}\;<\;Ca^{++}$, and in the order of increasing concentration of the organic components in the mixed solvent systems.

• Journal of the Korea Concrete Institute
• /
• v.26 no.6
• /
• pp.687-694
• /
• 2014

This study established a displacement ductility ratio model for ductile design for the boundary element of shear walls. To determine the curvature distribution along the member length and displacement at the free end of the member, the distributions of strains and internal forces along the shear wall section depth were idealized based on the Bernoulli's principle, strain compatibility condition, and equilibrium condition of forces. The confinement effect at the boundary element, provided by transverse reinforcement, was calculated using the stress-strain relationship of confined concrete proposed by Razvi and Saatcioglu. The curvatures corresponding to the initial yielding moment and 80% of the ultimate state after the peak strength were then conversed into displacement values based on the concept of equivalent hinge length. The derived displacement ductility ratio model was simplified by the regression approach using the comprehensive analytical data obtained from the parametric study. The proposed model is in good agreement with test results, indicating that the mean and standard deviation of the ratios between predictions and experiments are 1.05 and 0.19, respectively. Overall, the proposed model is expected to be available for determining the transverse reinforcement ratio at the boundary element for a targeted displacement ductility ratio.