• Journal of environmental and Sanitary engineering
• /
• v.21 no.3 s.61
• /
• pp.52-60
• /
• 2006

The ion exchange resins have been synthesized from chlormethyl styrene-1,4-divinylbenzene(DVB) with 1%, 2%, and 20%-crosslinking and macrocyclic ligand of cryptand 21 by copolymerization method and the adsorption characteristics of uranium(VI), copper(II) and dysprosium(III) metallic ions have been investigated in various experimental conditions. The synthesis of these resins was confirmed by content of chlorine, element analysis, and IR-spectrum. The effects of pH, equilibrium time, dielectric constant of solvent and crosslink on adsorption of metallic ions were investigated. The metal ion was showed fast adsorption on the resins above pH 3. The optimum equilibrium time for adsorption of metallic ions was about two hours. The adsorption selectivity determined in ethanol was in increasing order uranium$(UO^{2+}_2)\;>\;copper(Cu^{2+})\;>\;dysprosium(Dy^{3+})$ ion. The adsorption was in order of 1%, 2%, and 20% crosslink resin and adsorption of resin decreased in proportion to order of dielectric constant of solvents.

• Geomechanics and Engineering
• /
• v.14 no.1
• /
• pp.19-27
• /
• 2018

It follows from the basic principles of mechanics of deformable solids relating to the strength, stability and propagation of elastic waves that the Earth's inner core cannot exist in the form of a spherical structure in the assumed thermobaric conditions and calculation values of physico-mechanical parameters. Pressure level reaches a value that is significantly greater than the theoretical limit of medium strength in the model approximations at the surface of the sphere of the inner core. On the other hand, equilibrium state of the sphere is unstable on the geometric forming at much lower loads under the influence of the "dead" surface loads. In case of the action of "follower" loads, the assumed pressure value on the surface of the sphere is comparable with the value of the critical load of "internal" instability. In these cases, due to the instability of the equilibrium state, propagation of homogeneous deformations becomes uneven in the sphere. Moreover, the elastic waves with actual velocity cannot propagate in such conditions in solid medium. Violation of these fundamental conditions of mechanics required in determining the physical and mechanical properties of the medium should be taken into account in the integrated interpretations of seismic and laboratory (experimental) data. In this case, application of the linear theory of elasticity and elastic waves does not ensure the reliability of results on the structure and composition of the Earth's core despite compliance with the required integral conditions on the mass, moment of inertia and natural oscillations of the Earth.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.11
• /
• pp.1535-1543
• /
• 2008

Microsatellites (MS) are useful for quantifying genetic variation within and between populations and for describing the evolutionary relationships of closely related populations. The main objectives of this work were to estimate genetic parameters, measure genetic distances and reconstruct phylogenetic relationships between Australian Angora/Angora_Aus/ and Cashmere/Cashmere_Aus/ populations and three Mongolian Cashmere goat (Bayandelger/BD/, Zavkhan Buural/ZB/, and Gobi Gurvan Saikhan/GGS/) populations based on variation at fourteen MS loci. The level and pattern of observed and expected heterozygosity and polymorphic information content of the fourteen loci studied across the populations were quite similar and high. Except for SRCRSP07, all studied microsatellites were in Hardy-Weinberg Equilibrium (p<0.001). Moderate genetic variation (7.5%) was found between the five goat populations with 92.5% of total genetic variation attributable to diversity existing between the individuals within each population. The greatest Nei's genetic distances were found between the Angora and four Cashmere populations (0.201-0.276) and the lowest distances were between the Mongolian Cashmere goat populations (0.026-0.031). Compared with other Cashmere goat populations, the GGS (crossbred with Russian Don Goats) population had the smallest pairwise genetic distance from the Australian Angora population (0.192). According to a three-factorial correspondence analysis (CA), the three different Mongolian Cashmere populations could hardly be distinguished from each other.

• The Journal of Industrial Distribution & Business
• /
• v.8 no.5
• /
• pp.7-13
• /
• 2017

Purpose - The purpose of this paper is to analyze the relationship between the real exchange rate and the output, which is based on the macroeconomic equilibrium theory in China. Its aim will be to verify whether the change in the real exchange rate has a significant effect on the output or not. Research design, data, and methodology - This study endeavors tries to investigate the correlation among economic variables under the macroeconomic market (the commodity market and the money market) equilibrium. So, time-series data from 1990 to 2016 is applied to establish a vector auto-regression (VAR) model so as to perform an empirical analysis. Results - The empirical results reveal that an increase in the real exchange rate will result in an increase in the output in the short run. However, the empirical results also indicate that this kind of mechanism cannot work in the long run. Conclusions - The effect of a decrease of real exchange rate on output is significant in the short run. Also, this paper suggests that the total supply and the total demand can promote economic growth. The fiscal and money policy play a significant role in economic growth in China as well.

• Korean Journal of Organic Agriculture
• /
• v.28 no.2
• /
• pp.171-188
• /
• 2020

The Coronavirus disease (COVID-19), first identified in China in December 2019, has widely spread worldwide and is an ongoing pandemic. It is expected that the ripple effect of COVID-19 on the global economy including the agricultural sector will increase substantially if not properly controlled shortly. This study examines the potential impact of COVID-19 on the Korean beef cattle sector and farm labor demand for Korean beef cattle using a dynamic partial equilibrium model. The agricultural production value and farm labor demand for Korean beef cattle in the scenario assuming pessimistic GDP growth rate (-1.2% in 2020) with no direct supply shocks fell by up to 4.00% and 0.67%, respectively, compared to the baseline which represents the future without COVID-19 outbreak. On the other hand, the agricultural production value and farm labor demand for Korean beef cattle in the scenario assuming both pessimistic GDP growth rate and supply shocks (-12.7% beef imports and + 2.4% feed cost in 2020) increased by up to 12.08% and 1.99%, respectively, compared to the baseline.

• Textile Coloration and Finishing
• /
• v.3 no.1
• /
• pp.1-7
• /
• 1991

The influences, that various mercerization conditions had on the dying property of cotton fiber, were studied. Crystallization degrees accompained by lattice transformation of slack-mercerized cotton by IR spectroscopic analysis and morphology of the slack-merceized cotton by SEM were observed in this research. The above results were as follows; 1. Equilibrium dye adsorption rates of slack-mercerized cotton with C. I. Reactive Blue 19 were gained in the case of 8M NaOH, $10^{\circ}C$, 20 min., about 2 times as large as the rates of untreated cotton and gained about 2.5 times in the case of 8M $NH_3$, $10^{\circ}C$, , 20 min. 2. Equilibrium dye adsorption rates of slack-mercerized cotton with C. I. Reactive Blue 2 were gained in the case of 2M NaOH, $10^{\circ}C$, 20 min., about 1.7 times as large as the rates of untreated cotton and gained about 2.4 times in the case of 8M $NH_3$, $10^{\circ}C$, 20 min. 3. It was confirmed by SEM that untreated cotton fibrils are formed in the shape of screw and treated cotton is rearranged in the direction of fiber axis.

• Smart Structures and Systems
• /
• v.9 no.5
• /
• pp.427-439
• /
• 2012

The present paper deals with the analytical solution of a functionally graded piezoelectric (FGP) cylinder in the magnetic field under mechanical, thermal and electrical loads. All mechanical, thermal and electrical properties except Poisson ratio can be varied continuously and gradually along the thickness direction of the cylinder based on a power function. The cylinder is assumed to be axisymmetric. Steady state heat transfer equation is solved by considering the appropriate boundary conditions. Using Maxwell electro dynamic equation and assumed magnetic field along the axis of the cylinder, Lorentz's force due to magnetic field is evaluated for non homogenous state. This force can be employed as a body force in the equilibrium equation. Equilibrium and Maxwell equations are two fundamental equations for analysis of the problem. Comprehensive solution of Maxwell equation is considered in the present paper for general states of non homogeneity. Solution of governing equations may be obtained using solution of the characteristic equation of the system. Achieved results indicate that with increasing the non homogenous index, different mechanical and electrical components present different behaviors along the thickness direction. FGP can control the distribution of the mechanical and electrical components in various structures with good precision. For intelligent properties of functionally graded piezoelectric materials, these materials can be used as an actuator, sensor or a component of piezo motor in electromechanical systems.

• Journal of Korean Medical classics
• /
• v.28 no.4
• /
• pp.57-63
• /
• 2015

Objectives : Through the analysis of the harmonization(和) thought in Traditional Chinese culture, and then excavate the theory and application of Harmonization Method(和法) in Huang Di Nei Jing(黃帝內經) and Shanghan Zabing Lun(傷寒雜病論). Methods : We find the harmonization(和) means harmony and neutral in traditional Chinese culture, including the harmony of society, the harmony of the mind and the body, and so on. Results : Huang Di Nei Jing(黃帝內經) emphasized the health status is moderate, the disease state is unbalance, preserving our health should keep the yin-yang equilibrium, treating disease should reestablish the equilibrium status, which establish the foundation of the theory of Harmonization Method(和法). Shanghan Zabing Lun(傷寒雜病論) created the methods of settlement and harmony, which is a precedent for the wide application of Harmonization Method(和法) for future generations, including to reconcile the interior-exterior and yin-yang, to harmony the ying-wei and qi-blood, to reconcile the activities of qi of internal organs. Conclusions : The harmonization(和) is the ideological foundation of the theory system of TCM and the Harmonization Method(和法). The Harmonization Method(和法) is an important treatment method for clinical practice of Traditional Chinese Medicine.

• Fire Science and Engineering
• /
• v.23 no.5
• /
• pp.17-23
• /
• 2009

Moisture evaporates, when concrete is exposed to fire, not only at concrete surface but also at inside the concrete to adjust the equilibrium and transfer properties of moisture. The equilibrium properties of moisture are described by means of water vapor sorption isotherms, which illustrate the hysteretical behavior of materials. In this paper, the prediction method of the moisture distribution inside the concrete members at fire is presented. Finite element method is employed to facilitate the moisture diffusion analysis for any position of member. And the moisture diffusivity model of high strength concrete by high temperature is proposed. To demonstrate the validity of this numerical procedure, the prediction by the proposed algorithm is compared with the test result of other researcher. The proposed algorithm shows a good agreement with the experimental results including the vaporization effect inside the concrete.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.7 no.3
• /
• pp.1-7
• /
• 2011

The analysis shows that the vibration is one of the main reasons of turbine failure. Especially, the problems caused by vibration occur right after retrofit of the turbine-generator and restarting the turbine. Through the case study of high vibration caused by after the turbine trip and restart, turbine vibration was identified to be influenced by startup condition. Turbine startup at high casing temperature right after unscheduled turbine trip cause radial expansion in rotor by contraction in axial direction, while casing continues to contract by steam flowing into casing. Consequently, gap between rotor and casing decrease until to metal contact to cause high vibration. Through the case study of high vibration of turbine-generator system after generator retrofit, it was identified that generator replacement could cause high vibration in turbine-generator system if the influence of generator replacement on entire system was not considered properly. To prevent startup delay caused by high vibration, it is important to keep the gaps at the design standard and start the turbine after thermal equilibrium.