• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.10
• /
• pp.3361-3370
• /
• 1996

Micro-Macro approach is conducted for the mixture solidification to handle the closely linked phenomena of microscopic solute redistribution and macroscopic solidification behavior. For this purpose, present work combines the efficiency of mixture theory for macro part and the capability of microscopic analysis of two-phase model for micro part. The micro part of present study is verified by comparison with experiment of Al-4.9 mass% Cu alloy. The effect of back diffusion on the macroscopic variables such as temperature and liquid concentration, is appreciable. The effect, however, is considerable on the mixture concentration and eutectic fraction which are indices of macro and micro segregation, respectively. According to the diffusion time, the behavior near the cooling wall where relatively rapid solidification permits short solutal diffusion time, approaches Scheil equation limit and inner part approaches lever rule limit.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.4
• /
• pp.65-74
• /
• 2003

This paper presents the results of a comparative study between FEM and LEM on slope stability analysis. For validation, factors of safety were compared between FEM and LEM. The results from the two methods were in good agreement. This suggests that the FEM with the shear strength reduction method can be effectively used on slope stability analyses. A series of analyses were then performed using the FEM for various constitutive laws, slope angles, flow rules, and the finite element discretizations. Among the findings, the finite element method in conjunction with the shear strength reduction method can provide reasonable results in terms of safety. Also revealed is that the results of FEM can be significantly affected by the way in which the type of constitutive law and flow nile we selected.

• The Korean Journal of Applied Statistics
• /
• v.15 no.1
• /
• pp.85-105
• /
• 2002

To explore the relationships among frequencies for sets of alleles, within or between loci, is one of the first analyses in population genetic study. The general question is whether the frequency of a set of alleles is the same as the product of each of the separate allele frequencies. For two alleles of a single locus, Hardy-Weinberg equilibrium is tested and for an allele from each of two loci, linkage disequilibrium is tested. However, it is more useful if we can quantify and graphically represent this information. In this study, we suggest graphical methods to find associations between alleles. We also analyze the STR data of Korean population as an illustration.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.12 no.1
• /
• pp.19-26
• /
• 2000

A numerical model is applied for predicting two-dimensional beach and dune erosion during severe storms. The model uses equation of sediment continuity and dynamic equation, governing the on-offshore sediment transport due to a disequilibrium of wave energy dissipation. And the model also uses sediment transport rate parameter K from dimensional analysis instead of that recommended by Kriebel. During a storm, a beach profile evolves to a form where the depth at the surf zone is related to the distance seaward of the waterline. In general, the erosion in the beach profile is found to be sensitive to equilibrium profile parameter, sediment transport rate parameter, storm surge level and breaking wave height.

• Journal of the Korean Society for Heat Treatment
• /
• v.24 no.5
• /
• pp.262-270
• /
• 2011

Carbide precipitation and dissolution behavior at various temperatures during heat treatment has been studied in STD11 cold working die steel through confocal scanning laser microscopy; dilatometry; and X-ray diffraction analysis. The equilibrium phase diagram and phase fractions with temperature were calculated using a FactSage program. Confocal laser microscopic observation revealed that ${\alpha}$ to ${\gamma}$ transformation temperature is near $800^{\circ}C$; M7C3 carbides melt at $1245^{\circ}C$; and the melting temperature of STD11 is near $1370^{\circ}C$. XRD results indicated that the M23C6 carbides dissolve in the matrix if austenitized at over $1030^{\circ}C$; while the M7C3 carbides remain up to $1200^{\circ}C$ although their amount decreases. The calculated equilibrium phase diagram showed good agreement with experimental results on carbide dissolution and phase transformation temperatures.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.434-443
• /
• 2009

Slope stability analysis is an essential part of rock slope design. For highly fractured rock, the limit equilibrium method (LEM) based slope stability analysis with a circular failure surface is often carried out assuming the rock mass behaves more or less as a continuum. This paper examines first, the applicability of the finite-element method (FEM) based shear strength reduction (SSR) technique for highly fractured rock slope, and second the use of Mohr-Coulomb (MC) failure criterion in conjunction with generalized Hoek-Brown (HB) failure criterion. The numerical results on a number of cases are compared in terms of the factor of safety (FS). The results indicated that the FEM-based SSR technique yields almost the same FSs from LEM, and that the MC and HB failure criteria yield almost identical FSs when the strength parameters for MC failure criterion are obtained based on the modified HB failure criterion if and only if value of the Hoek-Brown constant $m_i$ is smaller than 10 and slope angle is smaller than 1:1, otherwise MC failure criteria over-estimate the factor of safety.

• Journal of Power Electronics
• /
• v.16 no.6
• /
• pp.2085-2098
• /
• 2016

Laminated busbars with a low stray inductance are widely used in NPC three-level inverters, even though some of them have poor performances in heat equilibrium and overvoltage suppression. Therefore, a theoretical method is in need to establish an accurate mathematical model of laminated busbars and to calculate the impedance and stray inductance of each commutation loop to improve the heat equilibrium and overvoltage suppression performance. Firstly, an equivalent circuit of a NPC three-level inverter laminated busbar was built with an analysis of the commutation processes. Secondly, on the basis of a 3D (three dimensional) cubical thermal model and mirror circulation theory, a supersymmetric mirror circulation 3D cubical thermal model was built. Based on this, the laminated busbar was decomposed in 3D space to calculate the equivalent resistance and stray inductance in each commutation loop. Finally, the model and analysis results were put into a busbar design, simulation and experiments, whose results demonstrate the accuracy and feasibility of the proposed method.

• Environmental and Resource Economics Review
• /
• v.10 no.1
• /
• pp.95-126
• /
• 2001

Functional values for wastewater treatment and atmospheric regulation in coastal wetland and rice paddy ecosystems are quantified, and an illustration is given on how to integrate biophysical parameters into a valuation framework. This is one of most controversial issues in economic analysis for wetland preservation versus wetland conversion to agricultural use. This paper includes theoretical considerations for estimating functional values of environmental ecosystems, and the integration of biophysical data and replacement cost method employed. Specific physical and geographical characteristics and data on ecosystem functions and services in coastal wetlands and rice paddies are addressed for evaluating their values in economic terms. In particular this paper indicates double counting problems and overestimation in the previous studies, and demonstrates how to avoid them and to maintain the consistency of valuation process involving a least-cost method, thus enables an accurate integration of the coastal wetland ecology and wetland economics. As a result which is far away from the previous studies, the total economic present value of wastewater assimilation by coastal wetland is estimated at 7,484,640 won/ha, and the net present value of positive effect for atmospheric regulation, negative effects for air pollution and water pollution by rice paddy is estimated at -37,934 won/ha, assuming that resources are infinitely long-lived and the annual value and the rate of discount (10%) is constant every year. In conclusion, for further reliability and validity of functional values for natural resources it is very noteworthy that a general equilibrium framework that could directly incorporate the interdependence between ecosystem functions and services would be preferred to the partial equilibrium framework.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.966-973
• /
• 2008

In recent, the collapses of cut-slope is gradually increased due to the heavy rains accompanied by typhoon. Specially, many cut-slope failures and landslides was happened to Goheung, Yeosu, Suncheon region, Jeonranamdo in the middle of September 2007. The slope of investigation is width 20 m, height 22 m, and the circular failure was occurred. The parent rocks of the slope are pyroclastic rock, namely andesite, andesitic tuff et al. and the weathering grade is completely weathered to residual soils owing to rapid weathering process and has the existence of fault zone and mafic dyke. Also, lots of extension cracks are presented and the hydrologic condition is very deteriorated. As a result of the limit equilibrium analysis, the safety factor is 1.09(in dry season) and 0.64(in wet season). For the stabilization of the cut-slope, we decided to use the retaining wall, anchors and drainage apparatus.

• Journal of Korean Institute of Industrial Engineers
• /
• v.13 no.2
• /
• pp.65-77
• /
• 1987

Congestion occurs whenever users interfere with each other, while competing for scarce resources. In a congested market, such as a telecommunication service market, users of telecommunication services incur costs in using the service in addition to the price. The user's own time costs involved in learning to use the service, waiting for the service, and making use of the service are typically greater than the price of telecommunication services. A market equilibrium analysis is performed in which a method for user demand aggregation is developed. The effects of price changes on user demands and market demands for congested services are examined. It is found that total market demands may increase as the price for less-congested services increase under certain demand conditions. This suggests that a nonuniform pricing scheme for a congested service may improve the utilization of the congested system. The sign of price cross-elasticity for congested services is show to vary with demand conditions. A possible complementary property of congested services is found and the implication of such a property is discussed. It is argued that such a complementary property may lead to a cross subsidy in a market with congestion. Finally, comparisons between uniform pricing and nonuniform pricing policies are made. A specific numerical example is given to show that a nonuniform pricing policy may be Pareto superior to a uniform pricing policy.