• Journal of Microbiology and Biotechnology
• /
• v.23 no.9
• /
• pp.1244-1252
• /
• 2013

Sugar beet pulp is an abundant industrial waste material that holds a great potential for bioethanol production owing to its high content of cellulose, hemicelluloses, and pectin. Its structural and chemical robustness limits the yield of fermentable sugars obtained by hydrolyzation and represents the main bottleneck for bioethanol production. Physical (ultrasound and thermal) pretreatment methods were tested and combined with enzymatic hydrolysis by cellulase and pectinase to evaluate the most efficient strategy. The optimized hydrolysis process was combined with a fermentation step using a Saccharomyces cerevisiae strain for ethanol production in a single-tank bioreactor. Optimal sugar beet pulp conversion was achieved at a concentration of 60 g/l (39% of dry weight) and a bioreactor stirrer speed of 960 rpm. The maximum ethanol yield was 0.1 g ethanol/g of dry weight (0.25 g ethanol/g total sugar content), the efficiency of ethanol production was 49%, and the productivity of the bioprocess was 0.29 $g/l{\cdot}h$, respectively.

• Journal of Microbiology and Biotechnology
• /
• v.19 no.8
• /
• pp.845-850
• /
• 2009

Bioethanol derived from lignocellulosic biomass has the potential to replace gasoline. Cellulose is naturally recalcitrant to enzymatic attack, and it also surrounded by the matrix of xylan and lignin, which enhances the recalcitrance. Therefore, lignocellulosic materials must be pretreated to make the cellulose easily degraded into sugars and further fermented to ethanol. In this work, hydrothermal pretreatment on corn stover at $195^{\circ}C$ for 15 min with and without lower concentration of formic acid was compared in terms of sugar recoveries and ethanol fermentation. For pretreatment with formic acid, the overall glucan recovery was 89% and pretreatment without formic acid yielded the recovery of 94%. Compared with glucan, xylan was more sensitive to the pretreatment condition. The lowest xylan recovery of 55% was obtained after pretreatment with formic acid and the highest of 75% found following pretreatment without formic acid. Toxicity tests of liquor parts showed that there were no inhibitions found for both pretreatment conditions. After simultaneous saccharification and fermentation (SSF) of the pretreated corn stover with Baker's yeast, the highest ethanol yield of 76.5% of the theoretical was observed from corn stover pretreated at $195^{\circ}C$ for 15 min with formic acid.

• Proceedings of the Korean Fiber Society Conference
• /
• 1991.06a
• /
• pp.19-19
• /
• 1991

• Microbiology and Biotechnology Letters
• /
• v.43 no.1
• /
• pp.16-21
• /
• 2015

In this study, a facile two-step pretreatment method was investigated for producing fermentable sugars. Rice straw was pretreated using electron beam irradiation (EBI) and 4-methylmorpholine-N-oxide (NMMO) prior to enzymatic hydrolysis. In the first stage, the EBI on the rice straw was carried out at various doses (100, 300, 500 kGy) and then, irradiated rice straw was stirred with NMMO solution at 120°C for 1 h for the second stage. The pretreated rice straw was hydrolyzed by cellulase 1.5 L (70 FPU/ml) and Novozyme-188 (40 CbU/ml) at 50°C for 24, 48, and 72 h. A sugar yield of 83.8% was obtained from the pretreated rice straw after 72 h of enzymatic hydrolysis. Also, FTIR and XRD results indicate that the pretreatment of the rice straw was effective due to the synergic effects of the two-step pretreatment. In conclusion, rice straw might be a potential substrate for bioethanol production by yeast fermentation.

• Journal of Energy Engineering
• /
• v.23 no.3
• /
• pp.241-246
• /
• 2014

This study is to compare characteristics of saccharification reactions applying to enzymatic hydrolysis of pretreated fallen leaves for bio-ethanol production. It experimented pretreatment of acid, alkaline in the chemical. This experiment includes preteatment of acid and alkaline in chemical, soaking, shaking and autoclaving method, which were applied to biomass. In result, the glucose production from alkaline-NaOH method was 263 mg glucose/ g biomass comparing with them of acid-HCl method. Thus, alkaline-NaOH method is superior than the acid-HCl method for chemical preteatment of fallen leaves. Also, when various chemical treatments were compared, they were all. Based on the results of this study, we found that leaves, one of biomass, are possible in pretreatment and enzymatic hydrolysis process, and they are likely to affect bio-ethanol production in the future.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.179.1-179.1
• /
• 2011

Pretreatment of cellulosic biomass is necessary before enzymatic saccharification and fermentation. The objective of this study was to evaluate the effect of combined aqueous ammonia-dilute sulfuric acid treatment on cellulosic biomass. Miscanthus was pretreated using aqueous ammonia and dilute sulfuric acid solution under high temperature and pressure conditions to be converted into bioethanol. Aqueous ammonia treatment was performed with 15 %(w/w) ammonia solution at $150^{\circ}C$ of reaction temperature and 20 minutes of reaction time. And then, dilute sulfuric acid treatment was performed with 1.0 %(w/w) sulfuric acid solution at $150^{\circ}C$ of reaction temperature and 10 minutes of reaction time. The compositional variations of this combined aqueous ammonia-dilute sulfuric acid treatment resulted in 68.0 % of cellulose recovery and 95.7 % of hemicellulose, 81.3 % of lignin, 89.1 % of ash removal respectively. The enzymatic digestibility of 90.5 % was recorded in the combined pretreated Miscanthus sample and it was 14.7 times higher than the untreated sample. The ethanol yield in the Simultaneous Saccharification and Fermentation was 90.4 % of maximum theoretical yield based on cellulose content of the combined pretreated sample and it was about 98 % compared to the ${\alpha}$-cellulose ethanol yield.

• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.504-507
• /
• 2000

Enzymatic hydrolysis of cellulose was studied with emphasis on the effect of cellulase loading and pulp sludge concentration on glucose yield. Enzyme loading appeared to have a significant effect on glucose yield. Chemical pretreatment had no effect on enzymatic hydrolysis of pulp sludge. High glucose yield was obtained from enzymatic hydrolysis, especially at sludge concentrations lower than twenty percent. The optimum concentrations of crude cellulase and ${\beta}-glucosidase$ were 5 U/mL and 8 U/mL, respectively, considering the amount of enzymes used and glucose produced.

• Journal of Forest and Environmental Science
• /
• v.26 no.2
• /
• pp.137-148
• /
• 2010

The high costs for ethanol production with lignocellulosic biomass as a second generation energy materials currently deter commercialization of lignocellulosic biomass, especially wood biomass which is considered as the most recalcitrant material for enzymatic hydrolysis mainly due to the high lignified structure and the nature of the lignin component. Therefore, overcoming recalcitrance of lignocellulosic biomass for converting carbohydrates into sugar that can subsequently be converted into biobased fuels and biobased products is the primary technical and economic challenge for bioconversion process. This study was mainly reviewed on the research trend of the enhancement of enzymatic hydrolysis for lignocellulosic biomass after pretreatment in bioethanol production process.

• Journal of Forest and Environmental Science
• /
• v.36 no.1
• /
• pp.62-66
• /
• 2020

Ethanol fermentation of the enzymatic hydrolysates from the products pretreated using 1-ethyl-3-methyl-imidazolium acetate ([EMIM]Ac) and its co-solvents with dimethylformamide (DMF) was conducted using Saccharomyces cerevisiae (D452-2). The optical density change due to the yeast cell growth, the consumption amount of monosugars (glucose, xylose), the concentration of acetate, and ethanol production yield were investigated. The co-solvent system lowered inhibition of the growth of the cells. The highest concentration of glucose (7.8 g/L) and xylose (3.6 g/L) was obtained from the enzymatic hydrolysates of the pretreated product by pure [EMIM]Ac. The initial concentration of both monosugars in the enzymatic hydrolysates was decreased with increasing fermentation time. Ethanol of Approximately 3 g/L was produced from the enzymatic hydrolysates by pure [EMIM]Ac and co-solvent with less than 50% DMF.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.4
• /
• pp.65-71
• /
• 1999

This study was carried out to investigate the effect of xylanase pretreatment of the unbleached hardwood kraft pulp during the conventional Chlorine-Extraction- Hypochlorite (CEH) bleaching on pulp property. Optimum bleaching condition was evaluated by using Novozym produced from the fungus Humicola insolens. Also the effect of chelating agent prior to enzyme treatment was analyzed. The kappa number of enzymatic bleached pulp at the enzyme charge 10 IU/ml was slightly similar to that of bleached pulp without enzyme. By enzyme treatment, the chlorine charge in conventional CEH bleaching process of hardwood KP could be reduced by 17%, while no adverse effect on pulp yield and strength was. The optimum condition for enzyme pretreatment was 10 IU/ml xylanase charge, 3 to 4 hrs treatment, and 2% pulp consistency. In sugar composition in the enzyme pretreated pulp, arabinose and mannose were not much different, but more xylose was retained. This high content of hemicellulose in pulp seems to play an important role in pulp properties. The pulp pretreatment by chelating agent prior to enzyme treatment could improve the enzyme activity and enhance the bleaching effect at 0.2% diethylenetriamine pentaacetic acid (DTPA) charges.