• Structural Engineering and Mechanics
• /
• v.41 no.5
• /
• pp.645-662
• /
• 2012

Deteriorative effects of steel corrosion on the structural response of reinforced concrete are simulated for varying degrees of corrosion. The simulation approach is based on a three-dimensional irregular lattice model of the bulk concrete, in which fracture is modeled using a crack band approach that conserves fracture energy. Frame elements and bond link elements represent the reinforcing steel and its interface with the concrete, respectively. Polylinear stress-slip properties of the link elements are determined, for several degrees of corrosion, through comparisons with direct pullout tests reported in the literature. The link properties are then used for the lattice modeling of reinforced concrete beams with similar degrees of corrosion of the main reinforcing steel. The model is successful in simulating several important effects of steel corrosion, including increased deflections, changes in flexural cracking behavior, and reduced yield load of the beam specimens.

• Journal of Environmental Impact Assessment
• /
• v.9 no.3
• /
• pp.203-214
• /
• 2000

Health risk assessment is applied to streamlining LCA(Life Cycle Assessment) using Monte carlo simulation for probabilistic/stochastic exposure and risk distribution analysis caused by data variability and uncertainty. A case study was carried out to find benefits of this application. BTC(Benzene, Trichloroethylene, Carbon tetrachloride mixture alias) personal exposure cases were assumed as production worker(in workplace), manager(in office) and business man(outdoor). These cases were different from occupational retention time and exposure concentration for BTC consumption pattern. The result of cancer risk in these 3 scenario cases were estimated as $1.72E-4{\pm}1.2E+0$(production worker; case A), $9.62E-5{\pm}1.44E-5$(manger; case B), $6.90E-5{\pm}1.16E+0$(business man; case C), respectively. Portions of over acceptable risk 1.00E-4(assumed standard) were 99.85%, 38.89% and 0.61%, respectively. Estimated BTC risk was log-normal pattern, but some of distributions did not have any formal patterns. Except first impact factor(BTC emission quantity), sensitivity analysis showed that main effective factor was retention time in their occupational exposure sites. This case study is a good example to cover that LCA with probabilistic risk analysis tool can supply various significant information such as statistical distribution including personal/environmental exposure level, daily time activity pattern and individual susceptibility. Further research is needed for investigating real data of these input variables and personal exposure concentration and application of this study methodology.

• Proceedings of The Korean Society of Agricultural and Forest Meteorology Conference
• /
• 2012.07a
• /
• pp.38-40
• /
• 2012

• Proceedings of the KSEEG Conference
• /
• 2001.04a
• /
• pp.206-207
• /
• 2001

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.472-475
• /
• 2003

Electric Power Steering (EPS) mechanism has become widely equipped in passenger vehicle due to the environmental consciousness and higher fuel efficiency. This paper describes the development of co-simulation technique and simulation integration technique of EPS control system with dynamic vehicle model. A full vehicle model interacted with EPS control algorithm is concurrently simulated on a single bump road condition. Dynamic responses of vehicle chassis and steering system resulting from road surface impact are evaluated and compared with proving ground experimental data. The comparisons will show reasonable agreement on tie-rod load. rack displacement, handle-wheel torque and tire center acceleration. This developed simulation capability can be used for EPS performance evaluation and calibration as well as for vehicle handling performance integration and synthesis.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.64 no.3
• /
• pp.53-61
• /
• 2022

This study evaluated the impacts of subsurface drainage design, i.e., spacing and depth, on agricultural productivity and environmental sustainability in two tile-drained fields (Sites A and E) under a corn-soybean rotation in the Midwestern United States. A calibrated and validated Root Zone Water Quality Model (RZWQM) was used to simulate Nitrate-N (nitrogen) losses to tile drainage and crop yields of 30 tile spacing and depth scenarios over 24 years (1992-2015). Our results presented that the narrower and deeper the tile drains are placed, the greater corn yield and Nitrate-N losses, indicating that the subsurface drainage design may cause a trade-off between agricultural productivity and environmental sustainability. The simulation results also presented that up to about 255.7% and 628.0% increase in Nitrate-N losses in Sites A and E, respectively, far outweigh the rate of increase in corn yield up to about 1.1% and 1.6% from the adjustment of tile spacing and depth. Meanwhile, the crop yield and Nitrate-N losses according to the tile configuration differed depending on the field, and the soybean yield presented inconsistent simulation results, unlike the corn yield, which together demonstrate the heterogeneous characteristic of agro-environmental systems to a subsurface drainage practice. This study demonstrates the applicability of agricultural systems models in exploring agro-environmental responses to subsurface drainage practices, which can help guide the introduction and installation of tile systems into farmlands, e.g., orchards and paddy fields, in our country.

• Journal of Navigation and Port Research
• /
• v.32 no.3
• /
• pp.207-213
• /
• 2008

Ship-handling simulation system has been used for maritime traffic safety assessment for harbor and fairway. There exist various environmental conditions under which ship may navigate along a fairway or in harbor. Due to the time and budget limitations, however, ship-handling simulations are usually carried out for very limited number of environmental conditions. In this paper, statistical method for effective and systematic determination of real time simulation conditions is suggested and applied to the maritime traffic safety assessment problems. In the empirical study, the principal component analysis method and the concept of empirical cumulative distribution function are suggested to estimate synthetic navigational difficulty and to select simulation conditions which would impose high difficulty on shiphandling.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.4
• /
• pp.284-290
• /
• 2015

Road traffic noise is closely related with urban forms and urban components, such as population, building, traffic and land-use, etc. Hence, it is possible to minimize the noise exposure problem depending on how to plan new town or urban planning alteration. This paper provides ways to apply for urban planning in consideration of noise exposure through road traffic noise estimation for alteration of small-scale urban form. Spatial autoregressive model from the former study is used as statistical model for noise simulation. The simulation results by the spatial statistical model are compared with those by the engineering program-based modeling for 5 scenarios of small-scale urban form alteration. The error from the limitation of containing informations inside the grid cell and the difficulties of reflecting acoustic phenomena exists. Nevertheless, in the stage of preliminary design, the use of the statistical models that have been estimated well could be useful in time and economically.

• Smart Structures and Systems
• /
• v.14 no.6
• /
• pp.1081-1103
• /
• 2014

Real-time hybrid simulation (RTHS) has emerged as an important tool for testing large and complex structures with a focus on rate-dependent specimen behavior. Due to the real-time constraints, accurate dynamic control of servo-hydraulic actuators is required. These actuators are necessary to realize the desired displacements of the specimen, however they introduce unwanted dynamics into the RTHS loop. Model-based actuator control strategies are based on linearized models of the servo-hydraulic system, where the controller is taken as the model inverse to effectively cancel out the servo-hydraulic dynamics (i.e., model-based feedforward control). An accurate model of a servo-hydraulic system generally contains more poles than zeros, leading to an improper inverse (i.e., more zeros than poles). Rather than introduce additional poles to create a proper inverse controller, the higher order derivatives necessary for implementing the improper inverse can be calculated from available information. The backward-difference method is proposed as an alternative to discretize an improper continuous time model for use as a feedforward controller in RTHS. This method is flexible in that derivatives of any order can be explicitly calculated such that controllers can be developed for models of any order. Using model-based feedforward control with the backward-difference method, accurate actuator control and stable RTHS are demonstrated using a nine-story steel building model implemented with an MR damper.

• Journal of Environmental Impact Assessment
• /
• v.20 no.1
• /
• pp.25-36
• /
• 2011

In this study, the accurate water quality analysis in rivers, including the non-point source is performed. First of all, watershed model, SWAT(Soil and Water Assessment Tool) was applied to analyze the impact of the non-point source in study area. And then, water quality analysis integrating the point source and the non-point source is implemented using QUALKO model. For more exact simulation, it should be the calibration and verification of variables and parameters which are needed for simulation. In addition, the importance of considering the non-point source was confirmed in river water quality simulation. BOD, TN, TP were analysed, and the results shows that BOD, TN and TP concentration was increased to 16.8%, 8.2% and 25.8% respectively. The more accurate estimate will be carried if use of reliable measurements and watershed simulation be done in models linking process. The suggested technique will improve the accuracy of the water quality analysis. The methodologies presented in this study will contribute to basin-wide water quantity and quality management.