• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.107-108
• /
• 2007

Overhead transmission lines are completely exposed to the environment. This causes faults in transmission lines due to natural environmental conditions. In some cases, transmission towers are damaged by typhoons and snow, as well as sleet on the transmission lines. It takes a lot of time to repair the damaged towers. For emergency restoration purposes, steel poles are installed to temporarily supply power. Before 2003, emergency restoration steel poles were made of angled steel, which required a large number of beams, bolts, etc. In addition, the foundation of the steel pole and ground wire was constructed using excavation and burial methods, therefore it required a lot of manpower and time to construct temporary transmission lines. In September 2003, typhoon Maemi, whose maximum wind speed was 60m/s, hit Korea. 'Maemi' destroyed transmission lines in the Busan and Geojea area, causing long blackouts. To reduce the recovery time to the damaged transmission lines, self-build based emergency towers were developed. self-build based emergency towers reduced recovery time from 24 hours to 4 hours or less. However, the self-build based emergency tower had no arms, so the temporary transmission lines could only be constructed without curves in line routes. In this paper, solving these self-build based emergency tower limitations, using insulated arms(designed for use with the self-build based emergency tower), shall be explained.

• Journal of the Korean Society of Safety
• /
• v.34 no.5
• /
• pp.78-86
• /
• 2019

Various safety measures have been established and implemented in order to reduce construction accidents. However, statistics data on at construction sites still show higher accident and mortality rates than other industries. As a result of investigating the causes of accidents occurring in the construction industry, most accidents resulted from the failure of the system. Therefore, the existing safety management system of the construction site is monitored so that it operates properly in the field, and it is an important factor to actively participate in construction work. In order to overcome this, the government emphasized on-site inspections and planning and implementation confirmation by public institutes to ensure the effectiveness of the safety management system through amendment of the Construction Technology Promotion Act, but the orderer' safety capability and manpower are insufficient at present. Therefore, in this study, the safety management system, such as design for safety, safety management plan, safety check, safety management cost, etc. specified in the Construction Technology Promotion Act, is regularly checked and confirmed to improve the effectiveness of the safety management system as well as to improve the safety management system of the construction site by deriving measures to strengthen the public function of the government.

• Journal of the Korean society of biological therapies in psychiatry
• /
• v.24 no.3
• /
• pp.142-155
• /
• 2018

Insomnia in patients with hematopoietic stem cell transplantation(HSCT) has been underdiagnosed and undertreated. This study reviewed the frequency, characteristics, physical and psychological effects, and treatments of insomnia in HSCT patients to highlight clinical importance in this specialized population. Furthermore, the authors intended to suggest a model that would conceptualize insomnia in the context of HSCT. In the pre-transplant period, about half of patients with HSCT suffered from sleep disturbance. A substantial number of patients experienced distressing insomnia during the HSCT procedure and recovered to the level of the pre-transplant period. However, sleep disruption could be a chronic symptom in HSCT survivors and could negatively impact quality of control, cancer-related fatigue(CRF), immune function, and psychological distress. The 3P's model(Predisposing, Precipitating, Perpetuating) explains insomnia in cancer population and could be also relevant to HSCT patients with specific consideration of CRF, graft-versus-host diseases, specific properties of hematological disease, and protective isolated milieu. Effective treatment of insomnia in HSCT includes non-pharmacological(e.g., cognitive behavioral therapy, environmental modification) and pharmacological interventions. The decision of pharmacological treatment should be based on the issue of safety due to high risk of potential drug-drug interactions. Screening, treatment, and further research of insomnia in HSCT patients using validated subjective and/or objective measures are warranted.

• The Journal of Economics, Marketing and Management
• /
• v.10 no.6
• /
• pp.39-46
• /
• 2022

Purpose: The purpose of this study is to look at the current status and cases of ESG at home and abroad, and through this, seek ways to activate the ESG strategy of domestic SMEs and suggest a direction. Research design, data and methodology: This study examines the current status of ESG management at home and abroad and examples of companies through related literature on ESG management and performance. Through this, the strategic direction of ESG management of domestic SMEs was presented. Results: Compared to the government and major corporations, SMEs can be said to lack ESG management activities. ESG activities include environmental activities such as carbon neutrality, waste management, eco-friendly supply chain management, establishment of safety and health processes to improve workers' environment, expansion of governance to guarantee autonomy and profitability such as fair trade, protection of social and shareholder rights such as anti-corruption, etc. should be based on Therefore, there are difficulties in ESG activities of SMEs that lack funds and manpower. Conclusions: Compared to the government and major corporations, SMEs can be said to lack ESG management activities However, it will be possible to establish and implement ESG management strategies based on the strengths of SMEs and the characteristics of each company.

• International Journal of High-Rise Buildings
• /
• v.11 no.2
• /
• pp.125-135
• /
• 2022

While buildings in recent days become taller and larger, many problems occur during the management of construction. Particularly, as the vertical movement of manpower and materials during construction has become longer while the lifting frequency and load increase, the need for a good lifting management practice is also increasing. Therefore, this study presents a real-time lifting performance monitoring system that can store and manage lifting records for construction management. Through review of literature and preceding studies related to construction lift, the concept of lift planning and operation management was understood, leading to the development of a system to monitor lifting operation and performance information. This system enabled quick measurement of the lifting performance during construction phase while responding to changes in the project schedule. To verify this system, a case study was conducted in which the current status and characteristics of the sensing-based lifting performance were derived.

• Journal of the Korea Safety Management & Science
• /
• v.26 no.1
• /
• pp.45-53
• /
• 2024

A Smart factories are systems that enable quick response to customer demands, reduce defect rates, and maximize productivity. They have evolved from manual labor-intensive processes to automation and now to cyber-physical systems with the help of information and communication technology. However, many small and medium-sized enterprises (SMEs) are still unable to implement even the initial stages of smart factories due to various environmental and economic constraints. Additionally, there is a lack of awareness and understanding of the concept of smart factories. To address this issue, the Cooperation-based Smart Factory Construction Support Project was launched. This project is a differentiated support project that provides customized programs based on the size and level of the company. Research has been conducted to analyze the impact of this project on participating and non-participating companies. The study aims to determine the effectiveness of the support policy and suggest efficient measures for improvement. Furthermore, the research aims to provide direction for future support projects to enhance the manufacturing competitiveness of SMEs. Ultimately, the goal is to improve the overall manufacturing industry and drive innovation.

• Journal of Korea Water Resources Association
• /
• v.55 no.4
• /
• pp.301-308
• /
• 2022

Algae is an indispensable primary producer in the ecosystem by supplying energy to consumers in the aquatic ecosystem, and is largely divided into green algae, blue-green algae, and diatoms. In the case of blue-green algae, the water temperature rises, which occurs in the summer and overgrows, which is the main cause of the algae bloom. Recently, the change in the occurrence time and frequency of the algae bloom is increasing due to climate change. Existing algae survey methods are performed by collecting water and measuring through sensors, and time, cost and manpower are limited. In order to overcome the limitations of these existing monitoring methods, research has been conducted to perform remote monitoring using spectroscopic devices such as multispectral and hyperspectral using satellite image, UAV, etc. In this study, we tried to confirm the possibility of species classification of remote monitoring through laboratory-scale experiments through algal culture and river water collection. In order to acquire hyperspectral images, a hyperspectral sensor capable of analyzing at 400-1000 nm was used. In order to extract the spectral characteristics of the collected river water for classification of algae species, filtration was performed using a GF/C filter to prepare a sample and images were collected. Radiation correction and base removal of the collected images were performed, and spectral information for each sample was extracted and analyzed through the process of extracting spectral information of algae to identify and compare and analyze the spectral characteristics of algae, and remote sensing based on hyperspectral images in rivers and lakes. We tried to review the applicability of monitoring.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.3
• /
• pp.240-248
• /
• 2016

As a new technical approach, the achievement of an eco-environmental leisure boat with a photovoltaic system is attempted by simultaneously actuating nine photovoltaic solar panels, in association with an applied sail control system by use of wind. In this approach, the photovoltaic system consists of a solar module, an inverter, a battery, and relevant components, while the sail control device is equipped with a sail up/down and mast-turning instrument. Furthermore, this research conducts a performance evaluation of the manufactured prototype and acquires the purposed quantity value and the development purpose items. The significant items-sail up/down speed (seconds) and mast turning angle (degrees)-are evaluated during the performance test. In the process of the performance evaluation, a wind direction sensitivity of 90% and a maximum instant charging power of 900 W were also obtained. In addition, the maximum sail time is evaluated in order to acquire the optimum quantity.

• Journal of the Society of Naval Architects of Korea
• /
• v.51 no.6
• /
• pp.548-555
• /
• 2014

As a considerable, experimental approach, an Auto-carriage type of $CO_2$ welding machine and a MIG(Metal Inert Gas) welding robot under inert gas atmosphere were utilized in order to realize Al 5083 welding applied to hull and relevant components of green Al leisure ships. This study aims at investigating the effect of welding conditions(current, voltage, welding speed, etc) on thermal deformation that occurs as welding operation and tensile characteristics after welding, by using Al 5083, non-ferrous material, applied to manufacturing of co-environmental Al leisure ships. With respect to welding condition to minimize the thermal deformation, 150A and 16V at the wire-feed rate of 6mm/sec were acquired in the process of welding Al 5083 through an auto carriage type of $CO_2$ welding feeder. As to tensile characteristics of Al 5083 welding through a MIG welding robot, most of tensile specimens showed the fracture behavior on HAZ(Heat Affected Zone) located at the area joined with weld metal, except for some cases. Especially, for the case of the Al specimen with 5mm thickness, 284.62MPa of tensile strength and 11.41% of elongation were obtained as an actual allowable tensile stress-strain value. Mostly, after acquiring the optimum welding condition, the relevant welding data and technical requirements might be provided for actual welding operation site and welding procedure specification(WPS).

• Journal of the Korean association of regional geographers
• /
• v.10 no.2
• /
• pp.341-355
• /
• 2004

This thesis is to analyze characteristic of sustainable development in the Nak-dong River. The results are summarized in the followings. 1) The principles which did not consider the equilibrium between development and environment, ecosystem, security. precautionary measure, equity could devise a plan, changes of economic land area, sand & gravel extractions from the riverbed, the river contamination cleanup, dam build 2) The rules which disregard polluter pay and opening participation in public affairs could input of too much province budget and manpower, project team. The measures to solve these problems could be proposed expansion of environmental infrastructure, sustainable sand & gravel extractions from the riverbed, fortifying the assistance of the residents who live in Dam construction site and the peripheral area of Dam, lower local fund rates in national projects, and the creation of management organization.