• Journal of Korean Society of Transportation
• /
• v.26 no.4
• /
• pp.51-61
• /
• 2008

Most of Korea's 15 local airports, with the exception Jeju, Gimpo and Gimhae airports, have been several billion Won in the red each year. It has been reported that one of the causes of the poor financial performance is inaccurate air traffic demand predictions. Under the situation, the entry of low-cost carrier air service using turbo-prop airplanes into the domestic airlines market gets a wide range of support, which is expected to promote the convenience of consumers and help to activate local airports. In this study, the authors (1) suggest a high-speed transport demand model among existing airlines, Korea Train Express (KTX) and low-cost carrier air service; (2) try to make low-cost air carrier demand predictions for a route between Seoul and Daegu through a stated-preference survey; and (3), examine possible effectiveness of selected policy measures by establishing an estimation model. First, fare has a strong influence for mode choice between high-speed transport modes when considering the entry of low-cost carrier air service between Seoul and Daegu. Even low-cost carrier air service fare is set at 38,000 won, which is considerably low compared with that of KTX, in the regions where the total travel time is the same for both low-cost carrier air service and KTX, the probability of selecting low-cost carrier air service is 0.1, which shows little possibility of modal change between high speed transportation means. It is suggested that the fare of low-cost air service between Seoul and Daegu should be within the range of from of 38,000 to 44,000 Won; if it is higher, the demand is likely to be lower than expected.

• Journal of the HCI Society of Korea
• /
• v.1 no.1
• /
• pp.21-28
• /
• 2006

Most of the commercialized wearable text input devices are wrist-worn keyboards that have adopted the minimization method of reducing keys. Generally, a drastic key reduction in order to achieve sufficient wearability increases KSPC(Keystrokes per Character), decreases text entry performance, and requires additional effort to learn a new typing method. We are faced with wearability-usability tradeoff problems in designing a good wearable keyboard. To address this problem, we introduced a new keyboard minimization method of reducing key pitch. From a series of empirical studies, we found the potential of a new method which has a keyboard with a 7mm key pitch, good wearability and social acceptance in terms of physical form factors, and allows users to type 15.0WPM in 3 session trials. However, participants point out that a lack of passive haptic feedback in keying action and visual feedback on users' input deteriorate the text entry performance. We have developed the One-key Keyboard that addresses this problem. The traditional desktop keyboard has one key per character, but the One-key Keyboard has only one key ($70mm{\times}35mm$) on which a 10*5 QWERTY key array is printed. The One-key Keyboard detects the position of the fingertip at the time of the keying event and figures out the character entered. We conducted a text entry performance test comprised of 5 sessions. The participants typed 18.9WPM with a 6.7% error rate over all sessions and achieved up to 24.5WPM. From the experiment's results, the One-key Keyboard was evaluated as a potential text input device for wearable computing, balancing wearability, social acceptance, input speed, and learnability.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.05a
• /
• pp.168-171
• /
• 2003

Generally RF AGC (Roll Force Automatic Gauge Control) controls the roll gap using the variation of rolling force caused by the roll eccentricity and the entry thickness of material, but RE AGC takes the bad effect of the roll eccentricity. The Feed-forward (FF) AGC method, which controls the next stand roll gap by the estimation of the thickness variation due to skid mark is needed to supplement the shortage of RF AGC. In this paper, an adaptive filtering method which takes account of the kind of material, the final objective thickness and the rolling speed is proposed to predict skid mark thickness variation. In addition, an improved estimation method of control point using a speedometer and looper angle is suggested. Via on line test, the performance improvement of the suggested FF AGC method is verified.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.7
• /
• pp.1597-1603
• /
• 1995

A prediction model on forward slip has been developed for presetting rolling speed of each finish mill stand in the continuous hot strip roduction. Those factors such as neutral point, friction coefficient, volume fractions undergoing width spread, shape of deformation zone at each side of entry and delivery of the rolls were taken into account. To reduce the speed unbalance between adjacent stands a refining method of adjusting friction coefficient has also been developed. On-line application of the model showed a good agreement in rolling speeds between the predictions and the actual measurements, and gave an outstanding improvement in the travelling stability of strip passing through the finishing mill train.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.40-40
• /
• 2000

Generally a RF AGC controls the roll gap using the variation of rolling force caused by the roll eccentricity and the entry thickness of material, but these can not be classified. The Feed- forward AGC method, which controls the next stand roll 9ap by estimation the skid mark of the previous stand output thickness is needed to supplement the shortage of RF AGC. In this paper, an improved filtering method of skid mark which take account of the kinds of materials, the final objective thickness and the roll speed is proposed, In addition, an improved estimation method of control point using the speedometer and looper angle is suggested, Via simulation, the performance improvement of the suggested FF AGC method is verified.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.31 no.4
• /
• pp.7-18
• /
• 2023

The continuous increase in air traffic emphasizes the importance of capacity calculation. Research on the calculation method of Terminal Control Area (TMA) capacity has been treated as a partial aspect of the airspace sector capacity or has been limitedly studied. This study aims to propose a mathematical model for calculating TMA capacity, taking into account the Standard Terminal Arrival Route (STAR), separation standards, TMA entry speed, and runway threshold passing speed. The proposed model has the advantage of being able to calculate the instantaneous arrival capacity, which has not been noted in previous studies, along with the throughput. Additionally, it is meaningful as the model can easily calculate the arrival capacity of the TMA considering airport construction, runway expansion, or new procedures.

• Journal of the Korean Society for Railway
• /
• v.15 no.5
• /
• pp.436-441
• /
• 2012

Pressure waves are generated and propagate in tunnel when train enters a tunnel with high speed. Compression wave due to the entry of train head propagates along the tunnel and is reflected at tunnel exit as expansion wave. While expansion wave due to the entry of train tail propagates along the tunnel and is reflected at tunnel exit as compression wave. These pressure waves are repeatedly propagated and reflected at tunnel entrance and exit. Severe pressure change per second causes ear-discomfort for passengers in cabin and micro pressure wave around tunnel exit. It is necessary to analyze the transient pressure phenomena in tunnel qualitatively and quantitatively, because pressure change rate is considered as one of major design parameters for an optimal tunnel cross sectional area and the repeated fatigue force on car body. In this study, we developed the characteristics method analysis based on fixed mesh system and compared with the results of real train test. The results of simulation agreed with that of experiment.

• Advances in materials Research
• /
• v.11 no.4
• /
• pp.375-390
• /
• 2022

Carbon Fiber Reinforced Polymer (CFRP) composite provides outstanding mechanical capabilities and is therefore popular in the automotive and aerospace industries. Drilling is a common final production technique for composite laminates however, drilling high-strength composite laminates is extremely complex and challenging. The delamination of composites during the drilling at the entry and exit of the hole has a severe impact on the results of the holes surface and the material properties. The major goal of this research is to investigate contemporary industry solutions for drilling CFRP composites: enhanced edge geometries of cutting tools. This study examined the occurrence of delamination at the entry and exit of the hole during the drilling. For each of the 80°, 90°, and 118°point angle uncoated Brad point, Dagger, and Twist solid carbide drills, Taguchi design of experiments were undertaken. Cutting parameters included three variable cutting speeds (100-125-150 m/min) and feed rates (0.1-0.2-0.3 mm/rev). Brad point drills induced less delamination than dagger and twist drills, according to the research, and the best cutting parameters were found to be a combination of maximum cutting speed, minimum feed rate, and low drill point angle (V:150 m/min, f: 0.1 mm/rev, θ: 80°). The feed rate was determined to be the most efficient factor in preventing hole entry and exit delamination using analysis of variance (ANOVA). Regression analysis was used to create first-degree mathematical models for each cutting tool's entrance and exit delamination components. The results of optimization, mathematical modelling, and experimental tests are thought to be reasonably coherent based on the information obtained.

• Journal of the Korean Society of Safety
• /
• v.32 no.4
• /
• pp.107-113
• /
• 2017

This paper deals with the traffic factors related to the collisions of circular intersections. The purpose of this study is to develop traffic accident models by type of collision based on land use. In pursuing the above, the traffic accident data from 2010 to 2014 were collected from the "Traffic Accident Analysis System (TAAS)" data set of the Road Traffic Authority. A multiple regression model was utilized in this study to develop the traffic accident models by type of collision. 17 explanatory variables such as geometry and traffic volume factors were used. The main results are as follows. First, the null hypothesis that the type of land use does not affect the number of accidents by type of collision is rejected. Second, 10 accident models by type of collision based on land use are developed, which are all statistically significant. Finally, the ADT, inscribed circle diameter, bicycle lane, area of central island, number of speed hump, circulatory roadway width, splitter island, area of circulatory roadway, mean number of entry lane and mean width of entry lane are analyzed to see how they affect accident by type of accident based on land use.

• Journal of Korea Society of Industrial Information Systems
• /
• v.17 no.5
• /
• pp.43-51
• /
• 2012

Smart phones provide variety of functions like world processing, chatting, web browsing, etc. for users. Therefore, efficiency of the keypad that are used in text entry are becoming more important. But, in traditional english mobile keypad, text entry speed is not efficient because simple placement of characters in accordance with the order of characters. In this paper, we propose the improved english keypad for smart phone using the frequency information of english characters and bigram. And, we verified that the proposed keypad is more efficient than other keypads through the experiment.