• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.1
• /
• pp.1-12
• /
• 2012

The purpose of water distribution system is supplying water to users by maintaining appropriate pressure and water quality. For efficient monitoring of the water distribution system, determination of optimal locations for pressure monitoring is essential. In this study, entropy theory was applied to determine the optimal locations for pressure monitoring. The entropy which is defined as the amount of information was calculated from the pressure change due to the variation of demand reflected the abnormal conditions at nodes, and the emitter function (fire hydrant) was used to reproduce actual pressure change pattern in EPANET. The optimal combination of monitoring points for pressure detection was determined by selecting the nodes receiving maximum information from other nodes using genetic algorithm. The Ozger's and a real network were evaluated using the proposed model. From the results, it was found that the entropy theory can provide general guideline to select the locations of pressure sensors installation for optimal design and monitoring of the water distribution systems. During decision-making phase, optimal combination of monitoring points can be selected by comparing total amount of information at each point especially when there are some constraints of installation such as limitation of available budget.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.4B
• /
• pp.755-762
• /
• 2000

Entropy coders as a noiseless compression method are widely used as end-point compression for images so there have been many contributions to increase of entropy coder performance and to reduction of entropy coder complexity. In this paper, we propose some entropy coders based on binary forward classification (BFC). BFC requires overhead of classification but there is no change between the amount of input information and that of classified output information, which we prove this property in this paper. And using the proved property, we propose entropy coders which are Golomb-Rice coder after BFC (BFC+GR) and arithmetic coder with BFC(BFC+A). The proposed entropy decoders do not have further complexity Son BFC. Simulation results also show better performance than other entropy coders which have similar complexity to proposed coders.

• Atmosphere
• /
• v.24 no.2
• /
• pp.141-150
• /
• 2014

This study investigates the characteristics of the Gross Moist Stability (GMS) over the tropics. The GMS summarizes the relationship between large-scale entropy forcing due to radiation and surface fluxes and the response of smaller-scale convection. The GMS is able to explain both to where moist entropy is advected by the atmospheric circulation and how deep the moisture flux convergence is in the tropical region. In the deep convective region, positive GMS appears over the warm pool region due to the strong column-integrated moisture convergence and the ensuing export of moist entropy to the environment. The vertical advection of moist entropy dominates over the horizontal advection in this region. Meanwhile, over the eastern tropical ITCZ region, which is characterized by shallow convective area, import of moist entropy by horizontal winds is dominant compared to the vertical moist entropy advection. Future changes in the GMS are also examined using the 22 CMIP5 model simulations. A decrease in the GMS appears widely across the tropics, but its increase occurs over the western-central equatorial Pacific. It is evident that the increased GMS region corresponds to an increased region of precipitation, implying that strengthened convection in the future due to increased entropy forcing exports the enhanced moist energy to stabilize the environment.

• Journal of the Korean Applied Science and Technology
• /
• v.7 no.1
• /
• pp.13-24
• /
• 1990

2-N,N,N-trimethyl ammonia decanoate, 2-N,N,N-trimethyl ammonio dodecanoate, 2-N,N,N-trimethyl ammonia tetradecanoate and 2-N,N,N-hexadecanoate with in straight long chain alkyl carboxybetaines, and N-decyl N,N-dimethyl ammonio ethanoate, N-dodecyl N,N-dimethyl ammonia ethanoate, N-tetradecyl N,N-dimethyl ammonia ethanoate and N-hexadecyl N,N-dimethyl ammonia ethanoate with in nitrogen-straight long chain alkyl carboxy betaines measured respectively surface tensions by the stalagmometer method at various temperature, also their critical micelle concentration were evaluated. In micellization, the contribution of standard free energy change(${\Delta}G^{\circ}m$), standard enthalpy change(${\Delta}H^{\circ}m$) and standard entropy change (${\Delta}S^{\circ}m$), have been calculated, with increasing temperature. ${\Delta}H^{\circ}m$ changes from negative, and a similar change in the sign of ${\Delta}H^{\circ}m$ is observed with increasing chain length at $25^{\circ}C$, while the entropy of micellization, ${\Delta}S^{\circ}m$ is positive over the temperature range studied, it becomes less so at higher temperatures. Estimates of the enthalpy and entropy contribution attributable to the ion head group and alkyl chain have been made. The enthalpy and entropy change, per methylene group increase respectively with increasing chain length the result are discussed in terms of current theories of micellization.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.3
• /
• pp.347-352
• /
• 2011

Entropy used for measuring the richness in details of the image and absolute mean brightness error(AMBE) providing a change in the image global appearance are two quantitative measures generally used for measuring quality of images. In this paper, we propose an entropy and AMBE-based thresholding method to binalize a given image. The effectiveness of the proposed method is demonstrated by thresholding experiments on nine test images and comparison with other conventional thresholding methods, that is, Otsu method and entropy-based method.

• Journal of the korean Society of Automotive Engineers
• /
• v.8 no.1
• /
• pp.62-74
• /
• 1986

The simulation of power cycle and unsteady gas exchange processes in the inlet and exhaust systems of the single-cylinder 2-stroke cycle compression ignition engine was studied in this paper. In power cycle process, the single-zone model proposed by Whitehouse and Way was used, and the convective and radiative heat transfer from cylinder contents to surroundings was considered. To solve the equations for gas exchange process, the generalized method of characteristics including area change, friction, heat transfer and entropy gradients was used. Also with the path line calculation, the entropy change along the path line and the variation of specific heat due to the change of temperature and the composition of cylinder gas were considered. As a result of the simulation, the change of pressure and temperature in the cylinder against the crank angle, the rate of net heat release, and the change of properties at each point in the inlet and exhaust pipe against the crank angle were obtained. The engine performances under various operating conditions were also calculated.

• Current Applied Physics
• /
• v.18 no.12
• /
• pp.1605-1608
• /
• 2018

$Gd_{1-x}Ho_xNi$ melt-spun ribbons were fabricated by a single-roller melt spinning method. All the compounds crystallize in an orthorhombic CrB-type structure. The Curie temperature ($T_C$) was tuned between 46 and 99 K by varying the concentration of Gd and Ho. A spin reorientation (SRO) transition is observed around 13 K. Different from $T_C$, the SRO transition temperature is almost invariable for all compounds. Two peaks of magnetic entropy change (${\Delta}S_M$) were found. One at the higher temperature range was originated from the paramagnet-ferromagnet phase transition and the other at the lower temperature range was caused by the SRO transition. The maximum of ${\Delta}S_M$ around $T_C$ is almost same. The other maximum of ${\Delta}S_M$ around SRO transition, however, had significantly positive relationship with x. It reached a maximum about $8.2J\;kg^{-1}\;K^{-1}$ for x = 0.8. Thus double large ${\Delta}S_M$ peaks were obtained in $Gd_{1-x}Ho_xNi$ melt-spun ribbons with the high Ho concentration. And the refrigerant capacity power reached a maximum of $622J\;kg^{-1}$ for x = 0.6. $Gd_{1-x}Ho_xNi$ ribbons could be good candidate for magnetic refrigerant working in the low temperature especially near the liquid nitrogen temperature range.

• Textile Coloration and Finishing
• /
• v.13 no.4
• /
• pp.249-255
• /
• 2001

To interpret the dyeing behavior of PTT fiber with C. I. Disperse Violet 1, the thermodynamic Parameters of dyeing, such as standard affinity, heat of dyeing(enthalpy change), entropy change, diffusion coefficient, and activation energy of diffusion, were obtained from isotherms and dyeing rates at various temperatures and compared with those of PET fiber. The heat of dyeing(enthalpy change) and the entropy change of PTT fiber showed smaller negative values than those of PET fiber. This means that the dye molecules in the PTT fiber are combined more loosely than in the PET fiber and that is due to the flexibility of polymer chains of PTT fiber. The diffusion coefficients of C. I. Disperse Violet 1 into the PTT fiber were larger than those for PET fiber, and the activation energy of diffusion on PTT fiber was smaller than that on PET fiber.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.1
• /
• pp.22-29
• /
• 2010

A real-time detection and tracking of moving objects in video sequences is very important for smart surveillance systems. In this paper, we propose a novel algorithm for the detection of moving objects that is the entropy-based adaptive Gaussian mixture model (AGMM). First, the increment of entropy generally means the increment of complexity, and objects in unstable conditions cause higher entropy variations. Hence, if we apply these properties to the motion segmentation, pixels with large changes in entropy in moments have a higher chance in belonging to moving objects. Therefore, we apply the Clausius entropy theory to convert the pixel value in an image domain into the amount of energy change in an entropy domain. Second, we use an adaptive background subtraction method to detect moving objects. This models entropy variations from backgrounds as a mixture of Gaussians. Experiment results demonstrate that our method can detect motion object effectively and reliably.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.3
• /
• pp.201-206
• /
• 2009

The focus of this work is placed on the analysis of the mixture formation process under the evaporative diesel-free spray conditions. In order to examine homogeneity of mixture within the vapor phase region of the injected spray, image analysis was carried out based on the entropy of statistical thermodynamics. As an experimental parameter, the injection pressure and ambient gas density were selected, and effects of the injection pressure and density variation of ambient gas on the mixture formation process in the evaporative diesel spray were investigated. In the case of application of the thermodynamic entropy analysis to evaporative diesel spray, the value of the dimensionless entropy always increases with increase in time from injection start. Consequently, the dimensionless entropy in the case of the higher injection pressure is higher than that of lower injection pressure during initial injection period.