• 한국해안·해양공학회논문집
• /
• 제28권3호
• /
• pp.160-170
• /
• 2016

본 연구에서는 조석 유입구에서의 단면통과 유량 및 조량 산정을 목적으로 목포해역 내 조석 유입구에서 ADCP를 이용한 단면 유속관측이 수행되었다. 우선, 원시 관측자료는 지배적인 유속성분 도출을 위하여 단면의 회전정도를 고려한 좌표회전이 수행되었으며, 정규화를 통하여 수평/수직방향 Sigma 좌표로 변환되었다. 또한, 관측이 이루어지지 않는 저면과 수면 근처의 Blank zone 데이터는 von-Karman 유속분포식을 이용하여 보간되었다. 보정된 자료를 이용하여 단면통과 유량이 정량적으로 산정되었는데, 조석에 따른 단면통과 유량의 변화양상 뿐만 아니라 목포해역의 낙조우세적 조석특성이 잘 나타나는 것으로 확인되었다. 또한, 과거 연구들에서 제시되는 조량 산정자료의 조석조건을 보완하여 현장 관측자료에 기반한 조량산정 방법의 조건이 재정립되었으며, 새로운 정의에 근거하여 조석 유입구에서의 단면 유속관측 자료를 이용한 조량의 정량적 산정이 국내 최초로 수행되었다. 조량 산정결과는 과거 연구들로부터 도출된 조량과 조석 유입구 흐름 단면적의 상관관계 결과와 비교 분석되었으며, 산정된 결과는 과거 연구결과들과 잘 일치하는 것으로 나타났다.

• Journal of Biosystems Engineering
• /
• 제37권2호
• /
• pp.75-81
• /
• 2012

Oyster mushroom farm which could not meet optimum temperature range yields non-uniform sized, low quality products. Thus, this study, utilizing STAR CCM+, one of the computational fluid dynamics (CFD) programs, analyzed the impact of air circulation and temperature distribution. Methods: After we visited numerous mushroom farms, we measured the temperature at the discharge ports of heaters, fan capacity, and the locations of the air circulators in the farms. According to the data, most mushroom growers installed the heaters near the entrance and discharge ports of the heaters at the third growing bed on the same height as the heaters in the entrance. The temperature at the discharge port of heater was $1,26^{\circ}C$, and the fan capacity was 4,500 $m^3$/hr. The air circulator was placed in the center of the mushroom farm 50cm above the ground, and its capacity of inlet port was 1,100 $m^3$/hr and discharge port 1,600 $m^3$/hr. The mushroom farm was insulated. Results: According to the analysis of the temperature distribution in the vertical plane of the entrance side, no air circulation causes the high temperature zone of 296~299K at the discharge port of the heater to take up 34% of area while the operation of air circulators causes it to occupy only 9%. This means that not using air circulators leads to a concentration of high temperature at the discharge port near the entrance. In addition, with the results of the analysis of the temperature distribution in the vertical planes of the center, no air circulation causes the temperature zone of 295~298K at the discharge port of the heater to take up 48% of area while the operation of air circulators causes it to occupy 80%. This shows that the high outlet port temperature disseminated to the center. Conclusions: After ninety minute operation of both heater and air circulator, the interior temperature became stabilized in the mushroom farm. Air circulation made the high temperature at the discharge port disseminate to the center and exit in the farm and equalize the temperature distribution.

• 교육시설
• /
• 제10권2호
• /
• pp.5-13
• /
• 2003

This paper attempts to verify the possibilities of sharing facilities in adjacent elementary and middle school. To achieve these purposes, the educational theories are reviewed and several schools are surveyed. The outcomes from this study are as follows : (1)It is possible and effective to share some facilities in the adjacent elementary and middle schools. To achieve the successful sharing effects, it is necessary for the schools concerned to collaborate heartfully in managing school facilities and in operating school curriculum. (2)This study recommends some school facilities such as the dinning room and kitchen, multi-purpose auditorium, administrative part and nursing room. (3)It is more effective that the sharing facilities be located in the adjacent zone and two playground and main entrance be detached from the other territorial zone.

• 소성∙가공
• /
• 제19권6호
• /
• pp.344-351
• /
• 2010

This paper presents a precision on-line model for the prediction of the roll force and tension distributions across the strip in hot strip rolling. The approach is based on an approximate 3-D theory of rolling, and in particular, considers the effect of pre-deformation of the strip, which occurs near the roll entrance before the strip enters the bite zone. The prediction accuracy of the proposed model is examined through comparison with the predictions from the 3-D finite element models.

• 소성∙가공
• /
• 제28권4호
• /
• pp.190-196
• /
• 2019

The capability of accurately predicting the roll force profile across a strip in the bite zone in cold rolling process is vital for the calculation of strip profile. This paper presents a derivation of a precision mathematical model for predicting variations in the roll force across a strip in cold rolling. While the derivation is based on an approximate 3-D theory of rolling, this mathematical model also considers plastic deformation in the pre-deformation region which is located close to the roll entrance before the strip enters the bite zone. Finally, the mathematical model is expressed as a boundary value problem, and it predicts the roll force profile and tension profile in addition to lateral plastic strain profile.

• 대한기계학회논문집B
• /
• 제32권8호
• /
• pp.574-581
• /
• 2008

The characteristics of combustion and flow for a lean premixed flame in lab-scale gas turbine combustor was studied through experiment and numerical analysis. From the experiment, flame structure and heat release rate were obtained from OH emission spectroscopy. Qualitative comparisons were made line-integrated OH chemiluminescence image and abel-transformed one. NOx analyzer was implemented to get the characteristic of NOx exhaust from the combustor. From the numerical analysis, the thermal distribution and characteristic of recirculation zone with the change of fuel-air mixing degree, the characteristic of methane distribution with equivalence ratio in the combustor respectively. Total heat release rate is increased with increasing equivalence ratio. Thermal Nox is reduced with increasing fuel-air mixing degree. Increasing equivalence ratio results in the decrease of the size of reaction zone and alteration of the position of the reaction zone into the entrance of the combustor.

• 한국실내디자인학회논문집
• /
• 제16권6호
• /
• pp.116-124
• /
• 2007

The purpose of this study is to find out the spatial characteristics of the multi-housing units in Seoul and Kyung-gi area since 2006. Literature review and content analysis were used for this study and 82units of the big size over $165m^2$ were analyzed to review such design characteristics as spatial composition, layout and linkage. Through this study, the following conclusions have been reached; 1) Most unit plans had 4LDK and 3bath types including family room as a public space. This results shows that family-room and bathroom has recently become more important than number of rooms in multi-housing units planning. 2) Diversity of plan figures such as mass-mixing, mass-separation and polygons(L, V-type)was showed in most unit plan, breaking from the standardized forms of box types. 3) Intermediated spaces such as foyers and halls in entrance zone were planned and sub-entrance into kitchen were planned for the various types of circulation and work-efficiency. Cases had private space separated from public space, the dispersion of rooms with the increase of connection by corridors, L-DK meaning the living room isolated from the dining and kitchen, partially located living room for a view in area distribution. The spatial planning of master-zone mostly consists of the types of two-rooms and an entry into a foyer(library, dress-powder room, bathroom and master bedroom). This study has a significant meaning on grasping current trend in Korean multi-housing and to provide information for future direction on housing-unit design.

• 한국주거학회논문집
• /
• 제19권5호
• /
• pp.1-10
• /
• 2008

This study attempts to analyze the characteristics of the space composition of the apartments and the general principles of apartments unit plans in Gyeongnam. Literature review and content analysis method were used in his research. The data of 108 unit plans were collected from e-catalogue and model houses of housing construction firms. The results of this study were as follows; 1) The general principle of Gyeongnam apartment unit plans, the tendency of 4LDk+2BATH type, 4bay, central type living room were showed. 2) In the point LDK and couple's bed room, LDK area become large and open type and couple's bed room were showed bed room+dress+powder+bath type as Maser's zone. 3) The entrance has a intermediate space as a balcony or a former space and the privacy of LDK space was protected from the entrance. 4) In the case of support space, generally support kitchen and laundry space were offered and several balconies were utilized. In fact, he differences of apartment plan composition between central cities and Gyeongnam were no showed. Therefore, these tendencies on plan composition of apartment in Gyeongnam were followed the general principles of Korean unit plans.

• 한국항만학회지
• /
• 제6권2호
• /
• pp.33-42
• /
• 1992

In this paper we investigate the motion response of a moored ship in the fluid region sheltered by inclined breakwaters. The matched asymptotic expansion technique is employed to analyze the wave fields scattered by the inclined breakwaters. Fluid domain is subdivided into the ocean, entrance and sheltered regions. Unknown coefficients contained in each region can be determined by matching at the intermediate zone between two neighboring regions. The wave field generated by the ship motion can be analyzed in terms of Green's function method. To obtain the velocity jump across the ship associated with the symmetric motion modes, the sheltered region is further divided into near field of the ship and the rest field. The image method is introduced to consider the effect of the pier near the ship. The integral equation for the velocity jump is derived by the flux matching between the inner region and the outer region of a moored ship. Throughout the numerical calculation it is found that the inclined angle width of entrance of breakwaters as well as the location of moored vessel play an important role in the motion response of a moored ship.

• 대한건축학회논문집:계획계
• /
• 제34권5호
• /
• pp.71-78
• /
• 2018

This study seeks to identify elements of spatial planning for areas surrounding children's parks in order to improve child safety. It will identify different aspects of child safety and extract elements of safety planning for the areas surrounding children's parks from a literature review of both domestic and international research. The study classifies the space between one's residence and the children's park as either a "means of access", such as pedestrian walkways and streets, or a "boundary", which consists of the entrance, exit, and fences; then, the derived safety planning elements were categorized in accordance with this classification. In order to ensure the validity of the planning elements, an expert survey was conducted of environment planners who specialize in the palnning and designing of residential area as well as government employees who are in direct charge of managing children's parks. The survey findings were as follow. First, the pedestrian walkway(means of access) near the park is the most crucial factor in regards to the safety of children, followed by the entrance and exit(boundary), fency(boundary), and streets (means of access), in descending order of importance. Thus, improving the safety of the pedestrian walkway should be considered first and foremost, and it should precede improving the surrounding streets. Second, an investigation of the need for safety devices near the children's park showed that securing visibility, through the installation of an illegal parking prevention device, is imperative. Illegal parking near children's parks poses a grave risk to pedestrian safety and demands immediate action. Furthermore, a section of streets within 300m of the park entrance should be designated as a children protection zone, in addition to the designation of school zones near elementary schools.