• Korean Journal of Veterinary Research
• /
• v.14 no.2
• /
• pp.243-252
• /
• 1974

The experiment was performed in order to investigate the applicability of the rapid detection of salmonellae in various animal-origin foods by means of the direct fluorescent antibody technique. Egg, sausage and chicken were inoculated with various concentrations of Sal.paratuphi A, Sal. paratyhi B and Sal. thompson, and the fluorescent antibody technique was applied and compared with the conventional cultura method for the sensitivity of detection of the organisms. Two methods were employed in the fluorescent antibody technique; the direct smear method in which the smear being made directly from the specimens, and the enrichment smear method in which the smear being made from the enrichment broth. The effect of various enrichment time (1,5,8,11 and 13 hours) in tetrathionate broth on the detection of salmonellae in the fluoresent antibody technique was also studied. The results obtained were summarized as followings; 1. Of the three methods, the enrichment smear method of fluorescedt antibody technique was highly effective as cultural method for the detection of salmonella organisms. 2. Direct smear method of fluorescent antibody technique was effective as two other methods $5{\times}10^4$ organisms presented in 50 g(ml) of specimens. This method may not be applicable when the specimens contained $5{\times}10^2$ or less organisms. 3. Of the three specimens, the recovery rate of Salmonella organisms from egg was slightly higher than that of sausage and chicken. 4. In fluorescent antibody technique and cultural method, the specimens inoculated with Sal. thompson were found to be higher detection rate than the specimens inoculated with Sal. paratyphi A, 5. The optimum enrichment time of Salmonella organisms in tetrathionate broth on the detection by fluorscent antibody technique was found to be 11 hours or longer when the specimens of egg, sausage and chicken were inoculated with approximately 500 organisms. The longer enrichment time was the higher detection rate up to 11 hours tested.

• Journal of Radiation Protection and Research
• /
• v.26 no.3
• /
• pp.275-279
• /
• 2001

In uranium enrichment plants and nuclear fuel fabrication facilities, exact measurement of fissile isotope enrichment of uranium is required for material accounting in international safeguards inspection as well as process quality control. The purpose of this study was to develop a simple measurement system which can portably be used at nuclear fuel fabrication plants especially dealing with low enriched uranium. For this purpose, a small size CZT (CdZnTe) detector was used, and the detector performance in low uranium gamma/X -rays energy range was investigated by use of various enriched uranium oxide samples. New enrichment measurement technique and analysis method for low enriched uranium oxide, so-called, 'semi-peak ratio technique' was developed. The newly developed method was considered as an alternative technique for the low enrichment and would be useful to account nuclear material in safeguarding activity at nuclear fuel fabrication facility.

• Communications for Statistical Applications and Methods
• /
• v.12 no.2
• /
• pp.509-520
• /
• 2005

Data fusion is defined as the process of combining data and information from different sources for the effectiveness of the usage of useful information contents. In this paper, we propose a data fusion algorithm using k-means clustering method for data enrichment to improve data quality in knowledge discovery in database(KDD) process. An empirical study was conducted to compare the proposed data fusion technique with the existing techniques and shows that the newly proposed clustering data fusion technique has low MSE in continuous fusion variables.

• The Korean Journal of Applied Statistics
• /
• v.17 no.3
• /
• pp.605-617
• /
• 2004

One of the best important thing in data mining process is the quality of data used. When we perform the mining on data with excellent quality, the potential value of data mining can be improved. In this paper, we propose the data fusion technique for data enrichment that one phase can improve data quality in KDD process. We attempted to add k-NN technique to the regression technique, to improve performance of fusion technique through reduction of the loss of information. Simulations were performed to compare the proposed data fusion technique with the regression technique. As a result, the newly proposed data fusion technique is characterized with low MSE in continuous fusion variables.

• The Korean Journal of Applied Statistics
• /
• v.19 no.2
• /
• pp.291-303
• /
• 2006

Data mining is the work to extract information from existing data file. So, the one of best important thing in data mining process is the quality of data to be used. In this thesis, we propose the data fusion technique using decision rule for data enrichment that one phase to improve data quality in KDD process. Simulations were performed to compare the proposed data fusion technique with the existing techniques. As a result, our data fusion technique using decision rule is characterized with low MSE or misclassification rate in fusion variables.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1128-1133
• /
• 2004

A comprehensive experimental and numerical study has been conducted to understand the influence of $CH_{3}Cl$ addition on $CH_{4}/O_{2}/N_{2}$ premixed flames under the oxygen enrichment. The laminar flame speeds of $CH_{4}/CH_{3}Cl/O_{2}/N_{2}$ premixed flames at room temperature and atmospheric pressure are experimentally measured using Bunsen nozzle flame technique, varying the amount of $CH_{3}Cl$ in the fuel, the equivalence ratio of the unburned mixture, and the level of the oxygen enrichment. The flame speeds predicted by a detailed chemical kinetic mechanism employed are found to be in excellent agreement with those deduced from experiments. As $CH_{3}Cl$ addition is increased temperature at the postflame is not almost varied but the heat release rate and $EI_{NO}$ are decreased. The function of $CH_{3}Cl$ as inhibitor on hydrocarbon flames becomes weakened as the level of the oxygen enrichment is increased from 0.21 to 0.5.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.2 s.233
• /
• pp.255-262
• /
• 2005

A comprehensive experimental and numerical study has been conducted to understand the influence of $CH_{3}Cl$ addition on $CH_4/O_2/N_2$ premixed flames under the oxygen enrichment. The laminar flame speeds of $CH_4/CH_{3}Cl/O_2/N_2$ premixed flames at room temperature and atmospheric pressure are experimentally measured using Bunsen nozzle flame technique, varying the amount of $CH_{3}Cl$ in the fuel, the equivalence ratio of the unburned mixture, and the level of the oxygen enrichment. The flame speeds predicted by a detailed chemical kinetic mechanism employed are found to be in excellent agreement with those deduced from experiments. Even though the molar amount of $CH_{3}Cl$ in a methane flame is increased, temperature at the postflame is not significantly varied, but the calculated heat release rate and emission index of NO are largely decreased for the oxygen enhanced flame. The function of $CH_{3}Cl$ as inhibitor on hydrocarbon flames becomes weakened as the level of the oxygen enrichment is increased from 0.21 to 0.5.

• Structural Engineering and Mechanics
• /
• v.48 no.1
• /
• pp.125-150
• /
• 2013

This paper intends to present an application of isogeometric analysis in crack problems. An isogeometric formula is developed based on NURBS basis functions - enriched and adopted via X-FEM enrichment functions. The proposed method which is represented by the combination of the two above-mentioned methods, first by using NURBS functions models the geometry exactly and then by defining level set function on domain, identifies available discontinuity in elements. Additional DOFs are allocated to elements containing the crack and X-FEM enrichment functions enrich approximate solution. Moreover, a subelement refinement technique is used to improve the accuracy of integration by the Gauss quadrature rule. Finally, several numerical examples are illustrated to demonstrate the effectiveness, robustness and accuracy of the proposed method during calculation of crack parameters.

• Genomics & Informatics
• /
• v.4 no.3
• /
• pp.129-132
• /
• 2006

Toxicogenomics has recently emerged in the field of toxicology and the DNA microarray technique has become common strategy for predictive toxicology which studies molecular mechanism caused by exposure of chemical or environmental stress. Although microarray experiment offers extensive genomic information to the researchers, yet high dimensional characteristic of the data often makes it hard to extract meaningful result. Therefore we developed toxicant enrichment analysis similar to the common enrichment approach. We also developed web-based system graPT to enable considerable prediction of toxic endpoints of experimental chemical.

• Journal of Embryo Transfer
• /
• v.33 no.4
• /
• pp.245-254
• /
• 2018

Pigs are considered as optimal donor animal for the successful xenotransplantation. To increase the possibility of clinical application, genetic modification to increase compatibility with human is an important and essential process. Genetic modification technique has been developed and improved to produce genetically modified pigs rapidly. CRISPR/Cas9 system is widely used in various fields including the production of transgenic animals and also can be enable multiple gene modifications. In this study, we developed new gene targeting vector and enrichment system for the rapid and efficient selection of genetically modified cells. We conducted co-transfection with two targeting vectors for simultaneous inactivation of two genes and enrichment of the genetically modified cells using MACS. After this efficient enrichment, genotypic analysis of each colony showed that colonies which have genetic modifications on both genes were confirmed with high efficiency. Somatic cell nuclear transfer was conducted with established donor cells and genetically modified pigs were successfully produced. Genotypic and phenotypic analysis of generated pigs showed identical genotypes with donor cells and no surface expression of ${\alpha}$-Gal and HD antigens. Furthermore, functional analysis using pooled human serum revealed dramatically reduction of human natural antibody (IgG and IgM) binding level and natural antibody-mediated cytotoxicity. In conclusion, the constructed vector and enrichment system using MACS used in this study is efficient and useful to generate genetically modified donor cells with multiple genetic alterations and lead to an efficient production of genetically modified pigs.