• 해양환경안전학회지
• /
• 제23권3호
• /
• pp.301-312
• /
• 2017

CE RCD (Recreational Craft Directive) is a certification for the design and construction of small vessels, including pleasure yachts, which are widely used not only in the countries within the European Union, but also in Japan and Southeast Asia. Recently, South Korean leisure craft shipyards have developed interest in exporting to foreign leisure craft markets such as Europe; however, they have encountered difficulties because of the CE RCD regulations, which are relatively complex and difficult to understand. The requirements for buoyancy and stability, which are essential properties that must be understood within the early stage of ship design, are defined based on ISO 12217. However, preparing this assessment according to ship classification regulations is an exceedingly complex task, even with knowledge of naval architecture. In this research, we have developed design support tools to systematically support assessments and preemptively define design information so that buoyancy and stability assessments based on ISO 12217 can be systematically prepared. Our research results were applied to actual examples of yacht design to confirm validity. We believe that the improved yacht design process presented in this research can act as a foundational reference for enhancing the effectiveness and systematic buoyancy and stability assessments.

• Journal of Pharmaceutical Investigation
• /
• 제29권4호
• /
• pp.337-341
• /
• 1999

We have studied the stability and transdennal flux of prostaglandin $E_1\;(PGE_1)$ from various donor solutions through hairless mouse skin. Stability in HEPES buffer or in propylene glycol (PG) solution where enhancer (oleic acid (OA), propylene glycol monolaurate (PGML), transcutol (TC), ethanol (EtOH))s dissolved was investigated. $$PGE_1 was not stable in HEPES buffer. The concentration of $$PGE_1 decreased continuously for 7 days, and the degradation rate constant was $0.0028\;h^{-1}$, assuming first order reaction. The effect of current or penetration enhancer on the degradation was minimal. Percutaneous transport from HEPES buffer by passive or iontophoretic delivery without enhancer was close to nil. When OA or PGML was used together with PG, both passive and iontophoretic flux increased. PGML showed better enhancing effect than OA. Flux by cathodal delivery was about 2 times larger than that by passive delivery. Flux by anodal delivery was lower than that by passive delivery. TC and EtOH also increased the transdermal flux, but the effect was not as good as that observed when OA or PGML was used. These stability and flux data provide important information on how to formulate the patch, which will be the next step of this work, and on the polarity of current to use during iontophoresis.

• 한국안전학회지
• /
• 제29권4호
• /
• pp.23-27
• /
• 2014

The use of electromagnetic energy and non-equilibrium plasma for enhancing ignition and combustion stability is receiving increased attention recently. The conventional technologies have adapted the electrical devices to make the electromagnetic field, which resulted in various safety issues such as high-maintenance, additional high-cost system, electric shock and explosion. Therefore, an electrodeless microwave technology has an advantage for economic and reliability compared with conventional one because of no oxidation. However, the application of microwave has been still limited because of lack of interaction mechanism between flame and microwave. In this study, an experiment was performed with jet diffusion flames induced by microwaves to clarify the effect of microwave on the combustion stability and pollutant emissions. The results show that microwave induced flames enhanced the flame stability and blowout limit because of abundance of radical pool. However, NOx emission was increased monotonically with microwave intensity except 0.2 kW, and soot emission was reduced at the post flame region.

• 도시과학
• /
• 제12권2호
• /
• pp.53-64
• /
• 2023

With the development of the plant industry, there has been an increasing frequency of major accidents both domestically and internationally, emphasizing the importance of plant safety. Therefore, this study aims to investigate measures to enhance the stability of piping, a key component within the plant. Upon examining the piping, erosion, buckling, and fatigue emerged as significant risk factors among various potential hazards, leading to their selection as the primary risk factors in this study. Identifying variables that can collectively mitigate these factors, the study focuses on the material, thickness, and elbow angle of the piping. The reference piping model is established as the pipeline connecting the Skim Tank and IGF within a 300BPD oil sands modular plant in Yeoncheon, Gyeonggi-do. Utilizing the FEA analysis program ANSYS, the study conducts a variable analysis for the identified risk factors. The results of the analysis, through comparison and evaluation, provide evidence of the effectiveness of enhancing stability. It is observed that reducing the elbow angle significantly improves erosion and buckling, while changing to a material with high yield stress most significantly enhances stability when considering fatigue.

• Tribology and Lubricants
• /
• 제30권1호
• /
• pp.9-14
• /
• 2014

In this Part II study, rotordynamic stability analyses were carried out to confirm improvements to the stability of a process high-speed lightweight centrifugal compressor, depending on the effects of tilting pad journal bearing designs. The bearing design variables considered were the clearances, LBPs, LOPs, and preloads. The results showed that the rotordynamic stability of the subject compressor rotor-bearing system improves exactly in accordance with the effects of the bearing design variables, which were determined in the preceding Part I study, owing to reduced bearing stiffnesses. Specifically, it was confirmed that the stability of the rotor system can be greatly improved by increasing both the machined and assembled bearing clearances, but there were no stability improvements by simply changing from an LBP to an LOP design. In addition, it was confirmed that for given fixed machined bearing clearances, the stability can be additionally improved by decreasing the preloads, i.e., by increasing the assembled clearances. In conclusion, it may be necessary to improve the designs of the original tilting pad bearings to obtain a sufficient margin of rotordynamic stability against a possible aerodynamic cross-coupled stiffness in a process high-speed centrifugal compressor. Thus, increasing the machined and assembled bearing clearances and decreasing the preload could be effective solutions.

• Journal of information and communication convergence engineering
• /
• 제10권2호
• /
• pp.156-161
• /
• 2012

An increasing number of people who use a smart phone or tablet PC are accessing wireless networks in public facilities including cafes and shopping centers. For example, iPhones and Android Phones have been available since 2010. However, security incidents may occur through all sorts of malicious code infection of users' personal information during the use of an insecure wireless network. In this paper, we will describe the Wi-Fi protected access (WPA) and WPA2 encryption systems used to access a wireless network from a smart phone and tablet PC, and demonstrate the access point (AP) hacking process in a wireless network to which a password is applied on the basis of the analyzed WPA and WPA2 passwords. We will analyze the method of successful AP hacking and propose an approach to enhancing wireless LAN security. This study will contribute to enhancing the security and stability of wireless networks.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.189.1-189.1
• /
• 2013

Titanium dioxide (TiO2) is a wide bandgap semiconductor possessing photochemical stability and thus widely used for photocatalysis. However, enhancing photocatalytic efficiency is still a challenging issue. In general, the efficiency is affected by physio-chemical properties such as crystalline phase, crystallinity, exposed crystal facets, crystallite size, porosity, and surface/bulk defects. Here we propose an alternative approach to enhance the efficiency by studying interfaces between thin TiO2 layers to be stacked; that is, the interfacial phenomena influencing on the formation of porous structures, controlling crystallite sizes and crystallinity. To do so, multi-layered TiO2 thin films were fabricated by using a sol-gel method. Specifically, a single TiO2 thin layer with a thickness range of 20~40 nm was deposited on a silicon wafer and annealed at $600^{\circ}C$. The processing step was repeated up to 6 times. The resulting structures were characterized by conventional electron microscopes, and followed by carrying out photocatalytic performances. The multi-layered TiO2 thin films with enhancing photocatalytic efficiency can be readily applied for bio- and gas sensing devices.

• 한국터널지하공간학회 논문집
• /
• 제15권4호
• /
• pp.401-413
• /
• 2013

최근 연약지반 터널 현장에 활용되는 슬러리 쉴드 TBM은 굴진면으로 슬러리가 주입됨으로 그 안정성을 확보하는 공법이다. 하지만 간극이 과다하여 슬러리에 의한 폐색이 발생하지 않는 조립질 지반에서는 적용이 어렵기 때문에 첨가제를 혼입하여 사용하기도 한다. 본 연구에서는 첨가제의 역할로서 탄산가스를 주입함으로 슬러리가 주입되었을 때에 간극 내에 탄산가스가 흡착하여 폐색현상을 촉진시키는 효과를 규명하였다. 실내실험 결과 탄산 혼입에 따라 슬러리 쉴드 터널이 적용 가능한 유효입경이 1.0 mm에서 2.6 mm가량으로 증가하였고, 필터계수 ${\lambda}$가 $0.007sec^{-1}$이상인 경우에 탄산에 의한 효과가 발생함을 알 수 있었다.

• 로봇학회논문지
• /
• 제9권2호
• /
• pp.124-131
• /
• 2014

The robot mechanisms that were previously researched had only been conducted for the purpose of overcoming the obstacles stably at low speed driving and enhancing the stability against high speed circuitous driving, and yet, the mechanism satisfying two purposes. However, in order to stably drive with high speed on rough terrain, there is a need for satisfying both of these purposes, as well as testing the efficiency of the mechanisms at high speed driving. There, this paper simulated some of the passive mechanisms and focused on checking the performances of passive mechanisms through simulations and analyzing each mechanism on the basis of an evaluation index. The simulation was conducted by Adams (The Multi-body Dynamics Simulation Solution) and used various types of passive mechanisms which were introduced in the robotics field. As a result, the study confirmed that passive mechanisms have a number of situations that affect the driving stability on each direction of roll and pitch. Further study is needed about active mechanism.

• 한국산학기술학회논문지
• /
• 제8권5호
• /
• pp.1042-1046
• /
• 2007

본 연구에서는 제 3의 화학 원소 첨가에 의한 코발트 실리사이드와 니켈 실리사이드의 열적 안정성 향상 메카니즘을 조사하였다. 즉, Co-Si 시스템에 텅스텐을 첨가하는 경우 CoSi의 heat of formation이 증가하는 것으로 관찰되었다. 이러한 증가는 시스템 에너지 감속 속도의 최대화로 대변되는 실리사이드 형성 kinetics가 선호하는 glass의 형성을 억제하는 것으로 밝혀졌다. 이 경우 CoSi와 실리콘 기판 사이의 계면에 형성되는 다결정 구조는 glass의 self-diffusion보다 확산계수가 훨씬 작아 상 변이를 위해서는 보다 높은 열에너지를 요구하게 되어 궁극적으로 CoSi의 열적 안정성이 향상되는 것을 알 수 있었다.