• 한국통신학회논문지
• /
• 제34권11A호
• /
• pp.831-843
• /
• 2009

본 논문에서는 기존의 협력 기법보다 뛰어난 성능과 주파수 효율을 얻을 수 있는 다중 릴레이 노드를 이용한 새로운 적응형 협력기법을 제안한다. 릴레이 선택은 K개의 릴레이 중 가장 뛰어난 채널 상태를 가진 잠재적 릴레이를 선택하는데 이용된다. 소스와 목적지, 소스와 릴레이, 릴레이와 목적지사이 채널의 순시 신호 대 잡음 비를 고려하여 적응형 협력 또는 비 협력 여부를 결정한다. 본 논문에서 제안하는 적응형 프로토콜은 만일, 직접 통신의 채널 상태가 복호 후 전달 기법보다 양호하다면 소스는 가용한 전력으로 목적지로 신호를 전달하며, 그렇지 않다면 소스는 저전력으로 모든 릴레이에게 신호를 브로드캐스트하며, 릴레이의 올바른 복호를 가정할 시 릴레이는 신호를 복호한 후 다시 목적지로 전송하게 된다. 그리고 소스는 남은 전력으로 신호를 전송한다. 본 논문에서는 우선 확률적 계산을 통해 주파수 효율성을 보이며, 릴레이 선택을 통한 적응형 협력 기법의 BER성능 분석을 한다. 최종적으로 수식적 결과를 통해 본 논문에서 제안하는 기법의 성능 향상을 검증한다.

• Journal of Microbiology and Biotechnology
• /
• 제8권3호
• /
• pp.203-207
• /
• 1998

Fed-batch fermentations with different feeding media were carried out in order to increase the productivity of invertase expression using a recombinant Saccharomyces cerevisiae containing plasmid pRB58. Two batch cultures showed the expression of the SUC2 gene at a low concentration of glucose, suggesting that glucose concentration could be used as a control variable in a fed-batch operation mode. In the fed-batch culture by feeding the basal medium, cell mass and specific invertase activity did not increase much as compared with the simple batch culture. A series of fed-batch cultures revealed that the sucrose-supplemented medium increased cell mass whereas the enriched medium did specific invertase activity. To capitalize on the synergism of the sucrose-supplemented medium and the enriched medium, the sucrose-supplemented enriched medium was used as a feeding medium. The fed-batch culture using this medium resulted in a 2.4-fold increase in cell mass and a 1.9-fold enhancement in specific invertase activity compared with those of the batch culture. The increase in cell mass and specific invertase activity led to a marked increase in total invertase activity, 250U/ml, which was 6.3 times higher than that of the batch culture.

• Journal of Microbiology and Biotechnology
• /
• 제18권5호
• /
• pp.897-900
• /
• 2008

Various sequences of pH change were applied in a batch bioreactor to investigate pH shock effects on geldanamycin production by Streptomyces hygroscopicus subsp. duamyceticus JCM4427. In the control culture where the pH was not controlled, the maximum geldanamycin concentration was 414 mg/l. With the pHS1 mode of pH shock, that is, an abrupt pH change from pH 6.5 to pH 5.0 and then being maintained at around pH 5.0 afterward, 768 mg/l of geldanamycin was produced. With pHS2, in which the pH was changed sequentially from pH 6.7 to pH 5.0 and then back to pH 6.0, 429 mg/l of geldanamycin was produced. With pHS3 having a sequential pH change from pH 6.0 to pH 4.0 and then back to pH 6.5 followed by the third pH shock to pH 5.5, no geldanamycin production was observed. Considering that the productivity with pHS1 was about two-fold of that of the control culture with no pH control, we concluded that a more sophisticated manipulation of pH would further promote geldanamycin production.

• 분석과학
• /
• 제24권1호
• /
• pp.15-23
• /
• 2011

본 연구에서는 미지 대사물질 동정을 위해 GC-TOF/MS의 양이온 화학적 이온화 방법(positive chemical ionization, $CI^+$)을 이용, 정확한 질량 값(accurate mass)과 동위원소 비(isotope ratio) 측정을 위한최적 조건을 확립하였다. 분자이온 $[M+H]^+$ 세기를 증가시킬 수 있는 high mass tune 방법이 사용되었으며, 화합물들의 분리 및 감도에 따른 검출조건이 고려되어 졌다. 24종의 trimethylsilyl (TMS)기로 유도체화 된 표준 대사물질들을 분석한 결과 $[M+H]^+$의 경우 이론 값 과의 절대평균오차는 6.8 ppm이였으며, 동위원소 비(M+1/M, M+2/M)의 경우는 각각 1.5%와 1.7%였다. 얻어진 질량 값과 동위원소 비를 원소조성 알고리즘에 적용한 결과 21개의 화합물의 구조식이 2순위 내에서 일치하였다.

• 한국정보처리학회논문지
• /
• 제4권10호
• /
• pp.2521-2532
• /
• 1997

월드 와이드 웹(WWW)과 MBone 응용 등의 출현으로 인터넷 이용자가 급속히 증가되면서 인터넷 주소 공간의 확장과 멀티미디어 응용을 지원할 수 있도록 기존 인터넷 프로토콜의 개선이 요구됨에 따라 IETF에서는 차세대 인터넷 망 계층 프로토콜로써 IPv6를 개발하였다. 이 논문에서는 IPv6 프로토콜을 Windows NT의 커널 내부에 프로토콜 드라이버로 구현한 내용을 기술하고 있다. 본 연구에서는 IPv6 호스트로 동작되기 위해 필수적으로 요구되는 IPv6 헤더 처리기능, IPv6 주소처리기능, 제어메세지 처리기능, 그룹관리 메세지 처리기능, 이웃탐색 기능이 구현 및 시험되었다. 구현된 IPv6 프로토콜 드라이버 모듈은 하부 통신망 접속 카드와 표준 인터페이스인 NDIS를 통해 접속되며, 디스패치 함수화 Lower-Edge 함수를 이용하여 커널 내부에서 동작하는 드라이버 모듈을 상위 사용자 응용 및 하부 NDIS와 접속시키는 형태로 구현하였다. 구현된 IPv6 프로토콜 드라이버는 커널 모드에서 구현됨으로써 향상된 성능을 제공하며, 다이나믹 링크 라이브러리 형태로 사용자 인터페이스를 제공하므로 응용 프로그램 개발자들이 손쉽게 사용할 수 있도록 하였다.

• 한국측량학회지
• /
• 제37권5호
• /
• pp.379-388
• /
• 2019

Recently, a technique for acquiring spatial information data using UAV (Unmanned Aerial Vehicle) has been greatly developed. It is a very crucial issue of the GIS (Geographic Information System) mapping system that passes way point in the unmanned airframe and finally measures the accurate image and stable localization to the desired destination. Though positioning using DGPS (Differential Global Navigation System) or RTK-GPS (Real Time Kinematic-GPS) guarantee highly accurate, they are more expensive than the construction of a single positioning system using a single GPS. In the case of a low-priced single GPS system, the stability of the positioning data deteriorates. Therefore, it is necessary to supplement the uncertainty of the absolute position data of the UAV and to improve the accuracy of the current position data economically in the operating state of the UAV. The aim of this study was to present an algorithm enhancing the stability of position data in a single GPS mode of UAV with multiple GPS. First, the arrangement of multiple GPS receivers through the center of gravity of the UAV were examined. Next, MD (Mahalanobis Distance) is applied to detect instantaneous errors of GPS data in advance and eliminate outliers to increase the accuracy of previously collected multiple GPS data. Processing procedure for multiple GPS reception data by applying the center of the triangular method were presented to improve the position accuracy. Second, UAV navigation systems integrated multiple GPS through configuration of the UAV specifications were implemented. Using the unmanned airframe equipped with multiple GPS receivers, GPS data is measured with the TCM (Triangular Center Method). In addition, UAV equipped with multiple GPS were operated in study area and locational accuracy of multiple GPS of UAV with VRS (Virtual Reference Station) GNSS surveying were compared. The result showed that the error factors are compensated, and the error range are reduced, resulting in the reliability of the corrected value. In conclusion, the result in this paper is expected to realize high-precision position estimation at low cost in UAV using multiple low-cost GPS receivers.

• 국제초고층학회논문집
• /
• 제7권4호
• /
• pp.375-387
• /
• 2018

This paper presents a review on progressive collapse mechanism of steel framed buildings exposed to fire. The influence of load ratios, strength of structural members (beam, column, slab, connection), fire scenarios, bracing systems, fire protections on the collapse mode and collapse time of structures is comprehensively reviewed. It is found that the key influencing factors include load ratio, fire scenario, bracing layout and fire protection. The application of strong beams, high load ratios, multi-compartment fires will lead to global downward collapse which is undesirable. The catenary action in beams and tensile membrane action in slabs contribute to the enhancement of structural collapse resistance, leading to a ductile collapse mechanism. It is recommended to increase the reinforcement ratio in the sagging and hogging region of slabs to not only enhance the tensile membrane action in the slab, but to prevent the failure of beam-to-column connections. It is also found that a frame may collapse in the cooling phase of compartment fires or under travelling fires. This is because that the steel members may experience maximum temperatures and maximum displacements under these two fire scenarios. An edge bay fire is more prone to induce the collapse of structures than a central bay fire. The progressive collapse of buildings can be effectively prevented by using bracing systems and fire protections. A combination of horizontal and vertical bracing systems as well as increasing the strength and stiffness of bracing members is recommended to enhance the collapse resistance. A protected frame dose not collapse immediately after the local failure but experiences a relatively long withstanding period of at least 60 mins. It is suggested to use three-dimensional models for accurate predictions of whether, when and how a structure collapses under various fire scenarios.

• Current Optics and Photonics
• /
• 제6권5호
• /
• pp.497-505
• /
• 2022

Topological photonic nanocavities are considered to possess outstanding optical performance, and provide new platforms for realizing strong interaction between light and matter, due to their robustness to impurities and defects. Here hybrid plasmonic topological photonic nanocavities are proposed, by embedding various plasmon nanoantennas such as gold nanospheres, cylinders, and rectangles in a topological photonic crystal corner-state nanocavity. The maximum quality factor Q and minimum effective mode volume V_eff of these hybrid nanocavities can reach the order of 10⁴ and 10^-4 (𝜆/n)³ respectively, and the high figures of merit Q/V_eff for all of these hybrid nanocavites are stable and on the order of 10⁵ (𝜆/n)^-3. The relative positions of the plasmon nanoantennas will influence the coupling strength between the plasmon structures and the topological nanocavity. The hybrid nanocavity with gold nanospheres possesses much higher Q, but relatively large V_eff. The presence of a gold rectangular structure can confine more electromagnetic energy within a smaller space, since its V_eff is smallest, although Q is lowest among these structures. This work provides an outstanding platform for cavity quantum electrodynamics and has a wide range of applications in topological quantum light sources, such as single-photon sources and nanolasers.

• 센서학회지
• /
• 제31권6호
• /
• pp.423-427
• /
• 2022

A pressure sensor that mimics the sensing ability of human skin has emerged as high-profile technology because it shows remarkable applications in numerous fields such as robotics, human health monitoring, and artificial prosthetics. Whereas recent pressure sensors have achieved high sensitivity similar to that of human skin, they still show limited detection bandwidth. Moreover, once these e-skin are fabricated, their sensitivity and stiffness are fixed; therefore, they can be used for only limited applications. Our study proposes a new adaptive pressure sensor built with uniform gallium microdroplet-elastomer composite. Based on the phase transition of gallium microdroplets, the proposed sensor undergoes mode transformation, enabling it to have a higher sensitivity and wider detection bandwidth compared with those of human skin. In addition, we succeeded in extending a single adaptive pressure sensor to sensor arrays based on its high uniformity, reproducibility, and large-scale manufacturability. Finally, we designed an adaptive e-skin with the sensor array and demonstrated its applications on health monitoring tasks including blood pulse and body weight measurements.

• Steel and Composite Structures
• /
• 제45권6호
• /
• pp.797-818
• /
• 2022

Steel-precast ultra-high-performance concrete (UHPC) composite beams with demountable high-strength friction-grip bolt (HSFGB) shear connectors can be used for accelerated bridge construction (ABC) and achieve excellent structural performance, which is expected to be dismantled and recycled at the end of the service life. However, no investigation focuses on the demountability and reusability of such composite beams, as well as the installation difficulties during construction. To address this issue, this study conducted twelve push-out tests to investigate the effects of assembly condition, bolt grade, bolt-hole clearance, infilling grout and pretension on the crack pattern, failure mode, load-slip/uplift relationship, and the structural performance in terms of ultimate shear strength, friction resistance, shear stiffness and slip capacity. The experimental results demonstrated that the presented composite beams exhibited favorable demountability and reusability, in which no significant reduction in strength (less than 3%) and stiffness (less than 5%), but a slight improvement in ductility was observed for the reassembled specimens. Employing oversized preformed holes could ease the fabrication and installation process, yet led to a considerable degradation in both strength and stiffness. With filling the oversized holes with grout, an effective enhancement of the strength and stiffness can be achieved, while causing a difficulty in the demounting of shear connectors. On the basis of the experimental results, more accurate formulations, which considered the effect of bolt-hole clearance, were proposed to predict the shear strength as well as the load-slip relationship of HSFGBs in steel-precast UHPC composite beams.