• Journal of the Korea Organic Resources Recycling Association
• /
• v.6 no.1
• /
• pp.21-30
• /
• 1998

The effects of compost inoculation on the degradation of cellulosic fraction in composting of food waste and paper mixture were investigated by bench-scale composting. With the increase of seed inoculation, the time to reach the peaks of temperature, $CO_2$ evolution rate, and ammonia evolution rate was reduced, indicating that seed compost had beneficial effects on the enhanced degradation of organic materials at the early stage of composting. However, the final conversion of organic matters and the loss of ammonia were not affected by the amount of seed compost inoculated. The increasing of seed inoculum also resulted in the higher level of cellulase activity at initial stages and rapid rise to the maximums, suggesting that initial supply of sufficient cellulolytic microorganisms might facilitate the evolution of cellulase activity. The cellulose was degraded substantially during the increasing phase of cellulase activity, while they showed similar values at the end of 20 days composting. As a result, the seed inoculation seemed to be effective to the enhanced evolution of cellulase activity and cellulose degradation at initial stage of composting. But it did not contribute to increase the final degradation of cellulose after the entire composting reaction of 20 days.

• Korean Journal of Materials Research
• /
• v.30 no.6
• /
• pp.279-284
• /
• 2020

In this work, a carbon-doped carbon nitride photocatalyst is successfully synthesized through a simple centrifugal spinning method after heat treatment. The morphology and properties of the prepared photo catalyst are characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV-vis spectrophotometer (UV-vis), and specific surface area. The results show that the band gap of the prepared sample, g-CN-10 is 2.1 eV, is significantly lower than that of pure carbon nitride, 2.7 eV. As the amount of cotton candy increased, the absorption capacity of the prepared catalyst for visible light is significantly enhanced. In addition, the degradation efficiency of Rhodamine B (RhB) by sample g-CN-10 is 98.8 % over 2 h, which is twice that value of pure carbon nitride. The enhancement of photocatalytic ability is attributed to the increase of specific surface area after the carbon doping modifies carbon nitride. A possible photocatalytic degradation mechanism of carbon-doped carbon nitride is also suggested.

• Journal of the Korean Ceramic Society
• /
• v.46 no.1
• /
• pp.1-9
• /
• 2009

Activated carbon modified with nickel (Ni-AC) was employed the for preparation of Ni-activated carbon/$TiO_2$ (Ni-AC/$TiO_2$) composites. The $N_2$ adsorption data showed that the composites had a decreased surface area compared with pristine AC. This indicated blocking of the micropores on the surface of the AC, which was further supported by observation via SEM. XRD results showed that the Ni-AC/$TiO_2$ composite contained a mixed anatase and rutile phase while the untreated AC/$TiO_2$ contained only a typical single and clear anatase phase. EDX results showed the presence of C, O, and Ti with Ni peaks on the composites of Ni-AC/$TiO_2$. Subsequently, the photocatalytic effects on methylene blue (MB) were investigated. The improved decomposition of MB showed the combined effects of adsorptions and photo degradation. In particular, composites treated with Ni enhanced the photo degradation behaviors of MB.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.4
• /
• pp.859-865
• /
• 2005

The stimulatory effects of exogenous salicylate as a pathway inducer on phenanthrene biodegradation were investigated using Burkholderia cepacia PM07. The phenanthrene degradation rate was greatly enhanced by increasing the salicylate additions, and the maximum rate was 19.6 mg $I^{-1}\;d^{-1}$ with the addition of 200 mg $I^{-1}$ of salicylate, 3.5 times higher than that (5.6 mg $I^{-1}\;d^{-1}$) without the addition of salicylate. The degradation rate was decreased at higher concentrations of salicylate (above 500 mg$I^{-1}$), and cell growth was significantly inhibited. The phenanthrene degradation was not affected by increasing glucose up to 2 g $I^{-1}$, although dramatic microbial growth was obtained. The stimulatory effect of exogenous salicylate decreased in the presence of glucose. After the addition of 200 mg $I^{-1}$ of salicylate, approximately $60\%$ of the initial phenanthrene (50 mg $I^{-1}$) was degraded after 96 h. However, with extra addition of 200 mg $I^{-1}$ of glucose, the phenanthrene degradation rate decreased, and only $18.5\%$ of the initial phenanthrene was degraded.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2003.11a
• /
• pp.91-94
• /
• 2003

Ceramic femoral heads in the total hip replacement have been developed to reduce the polyethylene liner wear. Alumina and zirconia (3Y-TZP) are using in clinical application worldwide and there are many good test reports. However, alumina has a risk of catastrophic failure, and zirconia has the low temperature degradation in spite of enhanced fracture toughness. Recently, novel zirconia/alumina composite having low temperature degradation-free character and high fracture tough . was developed and it leads the lower wear 3f polyethylene than alumina and zirconia. In the present study, in order to optimise the microstructure of low temperature degradation (LTD)-free zirconia/alumina composite for the best wear resistance of polyethylene, various compositions of (LTD)-free zirconia/alumina composites were fabricated, and the sliding wear of UHMWPE against these novel composites were examined and compared with that against alumina and zirconia ceramics used for total hip joint heads.

• Journal of Microbiology and Biotechnology
• /
• v.12 no.4
• /
• pp.695-698
• /
• 2002

The biodegradation of 2,4,6-trinitrotoluene (TNT) was performed on a laboratory scale using P. putida originally isolated from explosive-contaminated soil. One hundred mg/1 of TNT was completely degraded within 20 h under optimum conditions. Various supplemental energy sources (carbon sources, nitrogen sources, and surfactant) were tested, with the main objective of identifying an inexpensive source and enhancing the degradation rate for large-scale biodegradation. Based on the degradation rate, molasses was selected as a possible supplemental carbon source, along with NH$_4$Cl and Tween 80 as a nitrogen source and surfactant, respectively. The degradation rate increased about 3.3 fo1d when supplemental energy sources were added and the degradation rate constant increased from 0.068 h$\^$-1/ to 0.224 h$\^$-1/. These results appear to be promising in application of the process to TNT-contaminated soil applications.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.10
• /
• pp.1551-1554
• /
• 2004

In the presence of laccase, low molecular weight (M.W.) fractions from lignosulfonate (M.W. 97 kD) were produced. By Sephadex column chromatography, four lower M.W. fractions of 9 kD, 1.8 kD, 1 kD and 0.85 kD were identified. The addition of acetovanillone (AV) or acetosyringone (AS) enhanced to the degradation of lignosulfonate with fungal laccase. During this process, there were found new generation of lower M.W. fractions, e.g. approximately 20 kD, 1.8 kD, 1 kD and 0.85 kD for AV, and 20 kD, 3 kD, 1 kD and 0.85 kD for AS, respectively. The quantities of lower M.W. products (especially the fractions of M.W. 1 kD and 0.85 kD) were larger than those in the controls. Also, its degradation became more active in the presence of AS than AV. The presence of AS or AV seems to prevent the re-polymerization of degraded lignosulfonate by the laccase.

• Korean Journal of Materials Research
• /
• v.32 no.11
• /
• pp.458-465
• /
• 2022

Interest in the use of semiconductor-based photocatalyst materials for the degradation of organic pollutants in a liquid phase has grown, due to their excellent performance and response to the light source. Herein, we fabricated a NiO-SiC-TiO₂ ternary structured photocatalyst which had reduced bandgap energy, with strong activation under UV-light irradiation. The synthesized samples were examined using XRD, SEM, EDX, TEM, DRS, EIS techniques and photocurrent measurement. The results confirmed that the two types of metal oxides were well bonded to the SiC fiber surface. The junction of the new photocatalyst exhibited a large number of photoexcited electrons and holes. The holes tended to oxidize the water and form a hydroxyl radical, which promoted the decomposition of methylene blue. The close contact between the 2D SiC fiber and metal oxide semiconductors expanded the scope of absorption wavelength, and enhanced the usability of the ternary photocatalyst for the degradation of methylene blue. Among three synthesized samples, the NiO-SiC-TiO₂ showed the best photocatalytic effect, and was considered to have excellent photoelectron transfer due to the synergy effect between the metal oxide and SiC.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.5
• /
• pp.311-316
• /
• 2014

Effects of operating parameters such as activated carbon dose and pH on the phenol oxidation in ozone-activated carbon hybrid process were investigated through a kinetic study. Activated carbon enhanced the self-decomposition of ozone, generating $OH{\cdot}$, thus promoting phenol degradation. The pseudo-first order rate constants of phenol degradation increased and half-life of phenol decreased with activated carbon dose. The increase of pH enhanced $OH{\cdot}$ generation through chain reactions initiated by $OH^-$, therefore increasing the phenol degradation rate. TOC removal efficiency increased about 3.2 times by adding activated carbon in ozonation process.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.7
• /
• pp.412-417
• /
• 2017

Removal characteristics of methyl orange and their dependence on operating parameters in a catalytic ozonation were investigated through a series of batch experiments. Activated carbon enhanced the self-decomposition of ozone, generating $OH{\cdot}$, thus promoting methyl orange degradation. As the carbon dose increases, the pseudo-first order rate constants of methyl orange degradation increased, resulting in the fast removal of methyl orange. The increase of gaseous ozone concentration enhanced the mass transfer to the aqueous solution, therefore, promoted the methyl orange removal. The methyl orange degradation was not significantly affected by the change of pH in the range of 5~12, and TOC removal was negligibly affected by the variation of pH over 7. The results indicate that the catalytic ozonation can be considered as an effective dye treatment technology.