• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.3
• /
• pp.55-61
• /
• 2024

In a hybrid architecture that combines the technological advantages of P2P(peer-to-peer) and cloud computing, it is possible to efficiently supply resources and allocate loads. In other words, by appropriately utilizing the processing power of the players constituting P2P as well as the server in the cloud computing environment, MMOG(Massively Multiplayer Online Game) can be configured that considers the scale of economic cost and service quality. In fact, the computing power and communication bandwidth of servers in the cloud are important demand-based resources. The more it is used when renting, the higher the cost, while the quality of service improves. On the other hand, if the player's processing power is utilized a lot, the quality of service deteriorates relatively while the economic cost decreases. In this paper, a bandwidth adjustment technique between servers and players for MMOG based on this hybrid structure is described. When the number of players running at the same time increases, the players' actions are appropriately distributed to servers and players to effectively utilize the server's computing power and communication volume. Simulation results show that in the MMOG based on cloud and P2P hybrid architecture, the bandwidth of the server is proportionally decreased as the bandwidth directly handled by players is increased.

• The Journal of the Acoustical Society of Korea
• /
• v.43 no.1
• /
• pp.103-111
• /
• 2024

Axial-flow fans are used to transport fluids in relatively low-pressure flow regimes, and a variety of design variables are employed. The tip geometry of an axial fan plays a dominant role in its flow and noise performance, and two of the most prominent flow phenomena are the tip vortex and the tip leakage vortex that occur at the tip of the blade. Various studies have been conducted to control these three-dimensional flow structures, and winglet geometries have been developed in the aircraft field to suppress wingtip vortices and increase efficiency. In this study, a numerical and experimental study was conducted to analyze the effect of winglet geometry applied to an axial fan blade for an air conditioner outdoor unit. The unsteady Reynolds-Averaged Navier-Stokes (RANS) equation and the FfocwsWilliams and Hawkings (FW-H) equation were numerically solved based on computational fluid dynamics techniques to analyze the three-dimensional flow structure and flow noise numerically, and the validity of the numerical method was verified by comparison with experimental results. The differences in the formation of tip vortex and tip leakage vortex depending on the winglet geometry were compared through a three-dimensional flow field, and the resulting aerodynamic performance was quantitatively compared. In addition, the effect of winglet geometry on flow noise was evaluated by numerically simulating noise based on the predicted flow field. A prototype of the target fan model was built, and flow and noise experiments were conducted to evaluate the actual performance quantitatively.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.26 no.1
• /
• pp.39-58
• /
• 2024

Tunnel Boring Machines (TBM) use multiple disc cutters to excavate tunnels through rock. These cutters wear out due to continuous contact and friction with the rock, leading to decreased cutting efficiency and reduced excavation performance. The rock's abrasivity significantly affects cutter wear, with highly abrasive rocks causing more wear and reducing the cutter's lifespan. The Cerchar Abrasivity Index (CAI) is a key indicator for assessing rock abrasivity, essential for predicting disc cutter life and performance. This study aims to develop a new method for effectively estimating CAI using rock strength, petrological characteristics, linear regression, and machine learning. A database including CAI, uniaxial compressive strength, Brazilian tensile strength, and equivalent quartz content was created, with additional derived variables. Variables for multiple linear regression were selected considering statistical significance and multicollinearity, while machine learning model inputs were chosen based on variable importance. Among the machine learning prediction models, the Gradient Boosting model showed the highest predictive performance. Finally, the predictive performance of the multiple linear regression analysis and the Gradient Boosting model derived in this study were compared with the CAI prediction models of previous studies to validate the results of this research.

• The Journal of the Acoustical Society of Korea
• /
• v.43 no.1
• /
• pp.39-48
• /
• 2024

A car horn serves a crucial safety role as a means of communication between drivers and a part that alerts pedestrians in advance. While previous studies have utilized finite element method and electric circuit model to simulate and analyze characteristics of the car horns, there remains a lack of research on design methods of a trumpet horn. This paper presents a design approach that predicts the operating frequency based on the acoustic reactance at the throat of the horn, once the vibrating part is determined. We deal with a horn combining both an exponential horn and a waveguide in the acoustic section, and confirm that the acoustic reactance at the horn throat measured by impedance tube experiment agrees well compared with the numerical result obtained using the finite element method. The resonance frequency of the car horn is predicted using the COMSOL Multiphysics finite element numerical analysis model, and the proposed design method is validated by measuring the operating frequency of the designed horn in a sound pressure experiment. As a result, the resonance measured in a semi-anechoic chamber environment by applying a DC voltage of 12 [V] excluding the holder occurs accurately within a few [Hz] of the design operating frequency. This paper discuss the design method of a trumpet horn from the perspective of the horn's acoustic reactance, and is expected to be useful for designing horn systems.

• The Journal of the Acoustical Society of Korea
• /
• v.43 no.1
• /
• pp.60-71
• /
• 2024

The present study aims to investigate the level difference of floor impact noises of composite floor structure using EVA resilient materials. In order to this, four different types of resilient materials were designed combining PET, PP sheet and EVA mount including Flat type, Deck type, Cavity type and Mount type. Totally 9 different samples were made for acoustic measurements which were carried out twice with bang-machine and impact ball as the heavy-weight floor impact noise sources. All the floor impact noise measurements were undertaken at the authentication institution. As a result, concerning Flat and Cavity types, it was found that 2 dB ~ 5 dB of heavy-weight floor impact noise was reduced supplementally when PET was added, while floor impact noise larger than 50 dB was acquired when single resilient material was used. Especially, most high performance was obtained for Mount type with 1st grade of light-weight floor impact noise and 2nd grade of heavy-weight floor impact noise. This is because of material property with low dense PET sound absorption materials which fill all around EVA mounts. Also, it was considered that this results are due to the sound impact absorption by the both EVA mounts and the air cavity between EVA mount and PP sheet. Also, it was found that at least 36 EVA mounts per 1m2 area of resilient panel make more noise reduction of heavy-weight floor impact noises.

• Herbal Formula Science
• /
• v.32 no.1
• /
• pp.63-82
• /
• 2024

Objective : Saengkankunbi-tang (SKT) is used as a traditional Korean herbal formula for treatment of liver diseases. We investigated the hepatoprotective effects of SKT plus Epimedium koreanum Nakai (EKE) against arachidonic acid (AA) + iron-mediated cytotoxicity in HepG2 cells and carbon tetrachloride (CCl₄)-mediated acute liver damage in mice. Methods : The cyto-protective effects of SKT + EKE were determined by MTT assay, western blot and fluorescence activated cell sorting analysis. In mice, blood biochemistry and western blot were assessed in CCl₄-induced acute hepatic damage. The animal groups included vehicle-treated control, CCl₄, SKT (200 mg/kg/day), EKE (100 mg/kg/day), SKT (200 mg/kg/day) + EKE (100 mg/kg/day) and silymarin (200 mg/kg/day). Results : In HepG2 cells, pretreatment with SKT + EKE significantly suppressed cytotoxicity induced by AA + iron and reduced the expression of proteins related to apoptosis. In addition, pretreatment with SKT + EKE significantly prevented the increase in H₂O₂ production, GSH depletion, and lower mitochondrial membrane potential induced by AA + iron. In CCl₄-induced liver damage mice, the administration of SKT + EKE prevented the liver damage by inhibition of hepatocyte damage and expression of apoptosis proteins in liver. More importantly, in vitro and in vivo assay, SKT + EKE showed significant effect compare with SKT alone or EKE alone in all parameters. Conclusions : These results indicated that SKT + EKE could protect against oxidative stress-induced liver damage, and SKT + EKE is more effective than SKT alone or EKE alone.

• Tunnel and Underground Space
• /
• v.34 no.1
• /
• pp.1-14
• /
• 2024

An image-reconstruction technology, involving the deployment of an unmanned mobility equipped with high-speed LiDAR (Light Detection And Ranging) has been proposed to reconstruct the shape of abandoned mine. Unmanned mobility operation is remarkably useful in abandoned mines fraught with operational difficulties including, but not limited to, obstacles, sludge, underwater and narrow tunnel with the diameter of 1.5 m or more. For cases of real abandoned mines, quadruped robots, quadcopter drones and underwater drones are respectively deployed on land, air, and water-filled sites. In addition to the advantage of scanning the abandoned mines with 2D solid-state lidar sensors, rotation of radiation at an inclination angle offers an increased efficiency for simultaneous reconstruction of mineshaft shapes and detecting obstacles. Sensor and robot posture were used for computing rotation matrices that helped compute geographical coordinates of the solid-state lidar data. Next, the quadruped robot scanned the actual site to reconstruct tunnel shape. Lastly, the optimal elements necessary to increase utility in actual fields were found and proposed.

• Journal of Navigation and Port Research
• /
• v.48 no.1
• /
• pp.62-77
• /
• 2024

In the maritime shipping industry, imbalance between supply and demand has persistently increased, leading to the utilization of blank sailings by major shipping companies worldwide as a key means of flexibly adjusting vessel capacity in response to shipping market conditions. Traditionally, blank sailings have been frequently implemented around the Chinese New Year period. However, due to unique circumstances such as the global pandemic starting in 2020 and trade tensions between the United States and China, shipping companies have recently conducted larger-scale blank sailings compared to the past. As blank sailings directly impact freight transport delays, they can have negative repercussions from perspectives of both businesses and consumers. Therefore, this study employed Poisson regression models and negative binomial regression models to analyze the influence of maritime freight rate determinants on shipping companies' decisions regarding blank sailings, aiming to proactively address potential consequences. Results of the analysis indicated that, in Poisson regression analysis for 2M, significant variables included global container shipping volume, container vessel capacity, container ship scrapping volume, container ship newbuilding index, and OECD inflation. In negative binomial regression analysis, ocean alliance showed significance with global container shipping volume and container ship order volume, the alliance with container ship capacity and interest rates, non-alliance with international oil prices, global supply chain pressure index, container ship capacity, OECD inflation, and total alliance with container ship capacity and interest rates.

• Journal of Navigation and Port Research
• /
• v.48 no.1
• /
• pp.34-48
• /
• 2024

As global supply chain risks proliferate unpredictably, the high interdependence of port and logistics industry intensifies the risk burden. This study conducted fundamental research to explore diverse safety issues in domestic ports. Utilizing news article data about Busan Port, we employed LDA topic modeling and time-series linear regression to understand key safety trends. Over the past 30 years, Busan Port faced nine major safety issues-maritime safety, import cargo inspection, labor strikes, and natural disasters emerged cyclically. Major port safety issues in Busan Port are primarily characterized by an unpredictable nature, falling under socio-environmental and natural phenomena types, indicating a significant impact of global uncertainty. Therefore, systematic policies need to be formulated based on identified port safety issues to enhance port safety in Busan Port. Additionally, there is a need to strengthen the resilience of port safety for unpredictable risk situations. In conclusion, advanced research activities are necessary to promote port safety enhancement in response to dynamically changing social conditions.

• Journal of Navigation and Port Research
• /
• v.48 no.1
• /
• pp.17-26
• /
• 2024

Port distripark can activate more functions. It is adjacent to a port. However, domestic port distripark is still limited to support port because of the shortage of infrastructure facilities, government policy, and investment. Therefore, this study tried to investigate the operation status of domestic port distripark and derive policy implications by conducting DEA analysis and productivity analysis based on internal data of each port distripark. As a result of Data Envelopment analysis, it was found that the west port distripark of Gwangwang and the northern port distripark of Incheon were efficient in the warehouse industry while the northern port distripark of Incheon and the Ulsan 1 port distripark were efficient in the manufacturing industry. In addition, in the case of foreign investment productivity, the west side port distripark of Gwangyang and the stage 1 port distripark of Pyeongtaek Dangjin were found to be higher than the others. In the case of facility investment productivity, the port distripark on the west side of Gwangyang and the north side of Incheon had the highest productivity. Lastly, in the case of labor productivity, the north side of Incheon and Busan ungdong port distripark showed the highest productivity. These results imply that it is important to review handling item when picking up enterprises in the port distripark for enhancing efficiency, foreign investment, and facility investment. The number of employees is not directly affecting the productivity improvement.