• Journal of Arbitration Studies
• /
• v.16 no.3
• /
• pp.161-189
• /
• 2006

This paper is aiming at analyzing case law of India in relation with reasonable time to make decision whether to accept or to refuse the documents received from the presenter in credit transactions. As specified in UCP, the failure to refuse to accept the documents within a reasonable time precludes the Issuing Bank, Confirming Bank (if any) and Nominated Bank from asserting that they are discrepant. Compliance of the stipulated documents on their face with the terms and conditions of the credit shall be determined by international standard banking practice as reflected in this Articles of UCP 500. The Issuing bank is only to be held responsible for honoring the documents presented by beneficiary through the nominated banks if they are strictly in compliance with terms and conditions of the Credit. As any well experienced banker knows, however, a word-by-word, letter-by-letter correspondence between the documents and the credit terms means a practical impossibility. Thus the notion of reasonable care in conjunction with the doctrine of strict compliance mixed with International Standard Banking Practices has not played a right functional standard for checking the documents as stipulated in the credit and UCP 500. And so the rejection rate is highly estimated at approximately 50% in EU and 40 to 70% according to their geographical locations in the USA. As a result, it can possibly be inferred from this fact that the credit industry would be facing the functional failure as the international trade credit facility, if not supported with motive power as a relevant scheme in UCP 500. It is quite important to note that UCP 500 Article 13(b) which specify the time limit for the banks to notify the presenter their decision not to accept the documents within a reasonable time not to exceed seven banking days following the day of receipt of documents would be the motive engine to improve the negotiability of documents in international trade financial facility.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.4
• /
• pp.423-429
• /
• 2002

Time-out is one of the basic but important functions in real-time programming. However, the C language used commonly in the embedded real-time systems doesn't support this capability. For this capability, there have been numerous studies on language extension and/or special purpose real-time kernel (or engine). Those require preprocessor or new kernel support. In this paper, we propose a time-out facility supported by a library and some macro functions with a minimum dependency on operating systems. Furthermore, we also provide a structured _within statement, a macro function which makes programming easy. We have implemented this for the LINUX and the DOS environment, and for the POSIX multithread environment as well.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.378-383
• /
• 2005

This experimental study presents the results of the cooling performance test of a $CO_2$ heat pump system for fuel cell vehicles. The experimental facility provides the cool ing and heating environment for cabin and heat releasing component. The test loop is designed to target the cooling capacity of 5kW and its coefficient of performance (COP) of 2.2. The cooling performance of the heat pump system is strongly dependent on the refrigerant charge and the degree of superheat. We carried out basic experiments to obtain optimum refrigerant charge and the degree of superheat level at the internal heat exchanger outlet. The heat pump system for fuel cell vehicles is different from that of engine-driven vehicles, where the former has an electricity-driven compressor and the latter has the belt-driven (engine-driven) compressor. In the fuel cell vehicle, the compressor speed is an independent operating parameter and it is controlled to meet the cooling/heating loads. Experiments were carried out at cooling mode with respect to the compressor speed and the incoming outdoor air speed. The results obtained in this study can provide the fundamental cool ing performance data using the $CO_2$ heat pump system for fuel cell vehicles.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.9 no.4
• /
• pp.96-103
• /
• 2005

The main purpose of launch vehicle is to insert satellite into a target orbit safely and correctly. To accomplish the main purpose of launch vehicle, the inserting velocity, inserting angle, and final mass of launch vehicle should be within the allowable range. In general, such requirements are satisfied with applying TCS(Thrust Control System) and TDS(Tank Depletion System), which manage thrust and mixture ratio by controlling propellant flow rate with thrust and mixture ratio control valves. In this study, the control characteristics of thrust and mixture ratio control valve were examined by PID control logic for stable operation of liquid-Propellant rocket engine at on-dosing point. The analysis on the control characteristics of control valves was done with AMESim code and the results from control valve test facility at KARI.

• Fire Science and Engineering
• /
• v.27 no.3
• /
• pp.52-59
• /
• 2013

It was described the measured friction loss depending on pressure used and changes in water flow rates for a fire hose used at a fire scene on this study. As a result of actual measurement based on the result obtained by analyzing the use situation of a fire hose such as the kind, quantity, pressure used, etc. of a fire hose, the friction loss in a fire hose under the condition of using by a fire officer at a fire scene was measured as up to 56.8 %. This is much different from the equivalent length of a fire hose used to calculate the pump head in an indoor and outdoor fire-fighting facility. There is no related restrictive regulation on friction loss, there are even no data on friction loss measured by fire hose makers, and spreading a fire hose without considering friction loss at a fire scene can result in an increased length of hose used and a high-pressure water discharge from a fire engine, so this study aims to establish a standard for an equivalent length to friction loss in a fire hose and to propose a spreading method considering friction loss in a fire hose at a fire scene.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.12
• /
• pp.1195-1201
• /
• 2010

Performance tests of a supersonic exhaust diffuser were conducted by using a liquid rocket engine for simulating high-altitude environment. The experimental setup consisted of a combustion chamber, a vacuum chamber and a diffuser. The combustion tests for simulating high-altitude environment were carried out at three cases by chamber pressure variation(26, 29, 32barg). The test results showed that the diffuser was started at all case and vacuum chamber pressures were approximately 140torr. The starting pressure using combustion gas was similar with that of cold gas, but the vacuum chamber pressure was relatively high because of high temperature in the vacuum chamber. The results of this test can be used as an essential database for the design of real-scale high-altitude simulation test facility in the future.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.2
• /
• pp.118-125
• /
• 2019

Metals exposed to high temperature/high pressure/oxidant excess environment of an oxygen excess pre-combustor may undergo rapid oxidation. In this study, the test facility to simulate the high temperature/high pressure/oxidant excess environment was constructed and the oxidation resistance evaluation was carried out for various metal materials. As a result, the discoloration of the metallic materials, the change in the surface roughness and the peeling of the metal surface were observed, and the weight change was also observed. The resulst showed that oxidation-resistant coating of a metal material of the combustor is indispensably required, and the use of XM-19, which has the highest content of Cr and Ni, is expected to provide more structural stability.

• Journal of Internet of Things and Convergence
• /
• v.8 no.1
• /
• pp.23-29
• /
• 2022

The product to be developed in this study is a heat recovery device which generates steam or hot water at high temperature and high pressure by heating water using exhaust gas from diesel engine, gas engine, gas turbine, etc. as an exhaust gas boiler off heat boiler(EGB) type for ship and power generation. The steam vapor or the created warm water is used as the power source required for the steerage heating and hot water facility or the HFO heating of the ship, and the turbine drive. The principle of waste heat boilers serves to heat water as high temperature exhaust gas with heat pass through the tube of the boiler. The heated water is a structure that is sent to a cabin or turbine device in the form of steam. In this study, the objective of this study is to maximize the efficiency by increasing the heat transfer surface by replacing the tube which is the heat transfer part of EGB with the plate tube.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.1
• /
• pp.9-16
• /
• 2018

Landscape architecture is an indispensable professional service in building sustainable land and urban environments. The landscape architecture industry is closely related to the promotion of the health and welfare of the people, urban revitalization and residential environment improvement as well as job creation. Despite various public interest values of landscape architecture, the growth engine of the landscape architecture industry, which is supposed to improve the quality of landscape services, has stagnated. In 2015, the Landscape Architecture Promotion Act was enacted to provide a landscape architectural promotion facility and complex system to support revitalization through the integration of the landscape architecture industry. The purpose of this study is to suggest an improvement plan to enhance the effectiveness of the landscape architectural promotion facility and complex system. The results of the analysis are as follows: First, workers and experts in landscape architecture recognized the need for policies and projects to promote the landscape architecture industry. Second, the industrial types suitable for the landscape architectural promotion facility were landscape design, landscape maintenance and management, and landscape construction industry. Meanwhile the industrial types suitable for a landscape architectural promotion complex were landscape trees and landscape facilities production and distribution. Third, the expected effect of the designation of the landscape architectural facility was 'the increase of the business opportunity through the expansion of the network'. On the other hand, that of the landscape architectural promotion complex was 'the activation of various information sharing'. Fourth, 'the size of the local government landscape architecture industry and the capacity to cultivate' was the most important among the designation criteria of the landscape architectural promotion facility. As for that of the landscape architectural promotion complex, the 'feasibility of promotion plan' was the most crucial. Fifth, 'tax benefit and deductible exemption' was considered as a necessary support method for the activation of the landscape architectural promotion facility, and 'maintenance and management fee support' was recognized in the case of the landscape architectural promotion complex.

• Journal of Energy Engineering
• /
• v.28 no.2
• /
• pp.18-35
• /
• 2019

The Korea District Heating Corporation operates a gas engine generator with a capacity of $4500m^3 /day$ of biogas generated from the sewage treatment plant of the Nanji Water Recycling Center and 1,500 kW. However, the actual operation experience of the biogas power plant is insufficient, and due to lack of accumulated technology and know-how, frequent breakdown and stoppage of the gas engine causes a lot of economic loss. Therefore, it is necessary to prepare technical fundamental measures for stable operation of the power plant In this study, a series of process problems of the gas engine plant using the biogas generated in the sewage treatment plant of the Nanji Water Recovery Center were identified and the optimization of the actual operation was made by minimizing the problems in each step. In order to purify the gas, which is the main cause of the failure stop, the conditions for establishing the quality standard of the adsorption capacity of the activated carbon were established through the analysis of the components and the adsorption test for the active carbon being used at present. In addition, the system was applied to actual operation by applying standards for replacement cycle of activated carbon to minimize impurities, strengthening measurement period of hydrogen sulfide, localization of activated carbon, and strengthening and improving the operation standards of the plant. As a result, the operating performance of gas engine # 1 was increased by 530% and the operation of the second engine was increased by 250%. In addition, improvement of vent line equipment has reduced work process and increased normal operation time and operation rate. In terms of economic efficiency, it also showed a sales increase of KRW 77,000 / year. By applying the strengthening and improvement measures of operating standards, it is possible to reduce the stoppage of the biogas plant, increase the utilization rate, It is judged to be an operational plan.