• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.8
• /
• pp.1805-1824
• /
• 2013

Recently, the use of wireless body area networks (WBAN) has been increasing rapidly in medical healthcare applications. WBANs consist of smart nodes that can be used to sense and transmit vital data such as heart rate, temperature and ECG from a human body to a medical centre. WBANs depend on limited resources such as energy and bandwidth. In order to utilise these resources efficiently, a very well organized medium access control (MAC) protocol must be considered. In this paper, a new, adaptive and energy-efficient MAC protocol, entitled isMAC, is proposed for WBANs. The proposed MAC is based on multi-channel communication and aims to prolong the network lifetime by effectively employing (i) a collision prevention mechanism, (ii) a coordinator node (WCN) selection algorithm and (iii) a transmission power adjustment approach. The isMAC protocol has been developed and modelled, by using OPNET Modeler simulation software. It is based on a networking scenario that requires especially high data rates such as ECG, for performance evaluation purposes. Packet delay, network throughput and energy consumption have been chosen as performance metrics. The comparison between the simulation results of isMAC and classical IEEE 802.15.4 (ZigBee) protocol shows that isMAC significantly outperforms IEEE 802.15.4 in terms of packet delay, throughput and energy consumption.

• ETRI Journal
• /
• v.38 no.4
• /
• pp.735-745
• /
• 2016

The Paris agreement at the 21st Conference of the Parties (COP21) emphasizes the reduction of greenhouse gas emissions and increase in energy consumption in all areas. Thus, an important aspect is energy saving in buildings where the lighting is a major component of the electrical energy consumption. This paper proposes a building energy management system employing visible light communication (VLC) based on LED lighting. The proposed management system has key characteristics including personalization and localization by utilizing such VLC advantages as secure communication through light and location-information transmission. Considering the efficient implementation of an energy-consumption adjustment using LED luminaires, this paper adopts variable pulse position modulation (VPPM) as a VLC modulation scheme with simple controllability of the dimming level that is capable of providing a full dimming range. This paper analyzes the VPPM performances according to variable dimming for several schemes, and proposes a VPPM demodulation architecture based on dimming-factor acquisition, which can obtain an improved performance compared to a 2PPM-based scheme. In addition, the effect of a dimming-factor acquisition error is analyzed, and a frame format for minimizing this error effect is proposed.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.12
• /
• pp.4269-4292
• /
• 2014

Currently, increasing numbers of access points (AP) are being deployed in enterprise offices, campuses and municipal downtowns for flexible Internet connectivity, but most of these access points are idle or redundant most of the time, which causes significant energy waste. Therefore, with respect to power conservation, applying energy efficient strategies in WIFI networks is strongly advocated. One feasible method is dynamically managing network resources, particularly APs, by powering devices on or off. However, when an AP is powered on, the device is initialized through a long boot time, during which period clients cannot be associated with it; therefore, the network performance would be greatly impacted. In this paper, based on a global view of an entire WLAN, we propose an AP selection technology, known as Temporary Access Selection (TAS). The criterion of TAS is a fusion metric consisting of two evaluation indexes which are based on throughput and battery life, respectively. TAS is both service and clients' preference specific through balancing the data rate, battery life and packet size. TAS also works well independently in traditional WLANs in which no energy efficient strategy is deployed. Moreover, this paper demonstrates the feasibility and performance of TAS through experiments and simulations with Network Simulator version 3 (NS3).

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.11
• /
• pp.2901-2919
• /
• 2012

Recent research in MEMS (Micro-Electro-Mechanical Systems) and wireless communication has enabled tracking of continuous objects, including fires, nuclear explosions and bio-chemical material diffusions. This paper proposes an energy-efficient scheme that detects and tracks different dynamic shapes of a continuous object (i.e., the inner and outer boundaries of a continuous object). EBCO (Efficient Boundary detection and tracking of Continuous Objects in WSNs) exploits the sensing capabilities of sensor nodes by automatically adjusting the sensing range to be either a boundary sensor node or not, instead of communicating to its neighboring sensor nodes because radio communication consumes more energy than adjusting the sensing range. The proposed scheme not only increases the tracking accuracy by choosing the bordering boundary sensor nodes on the phenomenon edge, but it also minimizes the power consumption by having little communication among sensor nodes. The simulation result shows that our proposed scheme minimizes the energy consumption and achieves more precise tracking results than existing approaches.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.4 no.1
• /
• pp.53-60
• /
• 2011

In-Home Display (IHD) is one of the most popular ways to induce voluntary customer participation in energy savings. Various communication technologies are used for recent IHD implementations, but most IHD systems are designed for each house because of their limitations such as communication coverage area and operation complexity. In this study, 400MHz RF communication is used for economical large-scale deployment of IHDs especially for apartment complexes that represent typical residentioal environment in Korea. Since it is essential to use internal batteries to increase the usability of IHD, the frequent changes of them should be avoided. By dividing communication data into 3 types such as common data, long term data, and short term data depending on their update periods, energy efficient communication protocol is designed and proposed. In result, the quantity of data and the battery consumption of IHD are reduced to 23.4% and 31.5% each without harming service quality.

• International Journal of Internet, Broadcasting and Communication
• /
• v.14 no.4
• /
• pp.80-87
• /
• 2022

Lack of sufficient battery capacity is one of the most important challenges impeding the development of wireless sensor networks (WSNs). Recent innovations in the areas of wireless energy transfer and rechargeable batteries have made it possible to advance WSNs. Therefore, in this article, we propose an energy-efficient charging of sensors in a WSN scenario. First, we have formulated the problem as an integer linear programming (ILP) problem. Then a utility function-based greedy algorithm named UGreedy/UF1 is proposed for solving the problem. Finally, the performance of UGreedy/UF1 is analyzed along with other baseline algorithms: UGreedy/UF2, 2-opt TSP, and Greedy TSP. The simulation results show that UGreedy/UF1 performs better than others both in terms of the deadline missing ratio of sensors and the total energy consumption of UAVs.

• Journal of Communications and Networks
• /
• v.14 no.2
• /
• pp.130-139
• /
• 2012

Energy harvesting has emerged as a powerful technology for complementing current battery-powered communication systems in order to extend their lifetime. In this paper a general framework is introduced for the optimization of communication systems in which the transmitter is able to harvest energy from its environment. Assuming that the energy arrival process is known non-causally at the transmitter, the structure of the optimal transmission scheme, which maximizes the amount of transmitted data by a given deadline, is identified. Our framework includes models with continuous energy arrival as well as battery constraints. A battery that suffers from energy leakage is studied further, and the optimal transmission scheme is characterized for a constant leakage rate.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.9
• /
• pp.2399-2418
• /
• 2023

The paper focuses on investigating secure transmission in wireless powered communication networks (WPCN) that involve multiple energy-constrained relays and one energy-constrained source. The energy is harvested from a power beacon (PB) while operating in the presence of a passive eavesdropper. The study primarily aims to achieve energy-efficient secure communications by examining the impact of channel estimation on the secrecy performance of WPCN under both perfect and imperfect CSI scenarios. To obtain practical insights on improving security and energy efficiency, we propose closed-form expressions for secrecy outage probability (SOP) under the linear energy harvesting (LEH) model of WPCN. Furthermore, we suggest a search method to optimize the secure energy efficiency (SEE) with limited power from PB. The research emphasizes the significance of channel estimation in maintaining the desired performance levels in WPCN in real-world applications. The theoretical results are validated through simulations to ensure their accuracy and reliability.

• International Journal of Internet, Broadcasting and Communication
• /
• v.7 no.1
• /
• pp.49-56
• /
• 2015

As WSN is energy constraint so energy efficiency of nodes is important. Because avoiding long distance communication, clustering operating in rounds is an efficient algorithm for prolonging the lifetime of WSN and its performance depends on duration of a round. A short round time leads to frequent re-clustering while a long round time increases energy consume of cluster heads more. So existing clustering schemes determine proper round time, based on the parameters of initial WSN. But it is not appropriate to apply the round time according to initial value throughout the whole network time because WSN is very dynamic networks nodes can be added or vanished. In this paper we propose a new algorithm which calculates the round time relying on the alive node number to adapt the dynamic WSN. Simulation results validate the proposed algorithm has better performance in terms of energy consumption of nodes and loss rate of data.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.5
• /
• pp.574-580
• /
• 2019

Conventional energy efficient routing protocols apply high weight to energy among routing metrics, causing nodes to concentrate on energy efficient paths and quickly exhaust energy on those paths. The unbalanced energy consumption of these wireless sensor networks causes network division and malfunction, and reduces network lifetime. Therefore, in this paper, it proposes a link cost based routing protocol to solve the unbalanced energy consumption of wireless sensor networks. The proposed routing protocol calculates the link cost by applying the weight of the routing metric differently according to the network problem situation and selects the path with the lowest value. As a result of the performance analysis, it confirmed that the proposed routing protocol has 22% longer network life, 2% energy consumption standard deviation and 2% higher data reception rate than the existing AODV protocol.