• 한국수자원학회논문집
• /
• 제53권9호
• /
• pp.661-670
• /
• 2020

최근 지진재해의 규모가 점차 증대됨에 따라 세계적으로 개별 시설물에 대한 내진성능평가와 관련한 연구가 다수 진행되고 있다. 상수도 시스템은 타 기반 시설에 비해 설치범위가 광범위하고 그 구성요소가 다양해 고려할 것이 많아 지진에 대한 안정성을 정확하고 효과적으로 확보하기 힘든 실정이다. 따라서 지진을 대비한 상수도 시스템의 내진성능 평가 방안을 연구하고 개발할 필요가 있다. 지진에 의한 상수도 시스템의 내진성능을 평가하기 위해 지반운동예측식(Ground Motion Prediction Equation, GMPE)이 활용된다. GMPE는 지진 규모 등과 같은 독립변수 와 PGV (Peak Ground Velocity), PGA (Peak Ground Acceleration)와 같은 지반운동 등을 고려하여 산정하게 된다. 우리나라에서 발생된 높은 강도의 지진 데이터는 현재까지 많이 축적되지 않아 특정 지진에 국한된 데이터를 활용하여 GMPE를 결정하는 등의 연구가 진행되었다. 본 연구에서는 우리나라에서 계측된 지진 데이터를 활용하여 국내 지진 모의에 적합한 GMPE를 선정하고자 하였으며, 이를 위해 기존 국내 지진을 기반으로 산정된 GMPE식을 분석하고 그 결과를 제시하였다. 본 연구를 통해 결정된 적정 GMPE는 상수도관망의 수리학적 내진성능 평가에 직접적으로 활용 가능하다. 즉, 파손확률 모형과의 연계를 통한 지진시 관로 파손률의 정량화가 가능하며, 파손 및 누수에 의한 단수지역 파악 등과 같은 피해범위 산정시 보다 객관적이며 합리적인 결과 도출이 가능하다. 최종적으로 이와 같은 내진 성능 정량화 결과는 지진재해가 발생하였을 경우 그 피해를 최소화할 수 있는 최적 복구방안 마련과 선제적 관망 내진설계의 기준 자료로 활용될 수 있다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제28권8호
• /
• pp.1150-1154
• /
• 2015

This experiment was conducted to investigate the effects of palm kernel expellers on productive performance, nutrient digestibility, and changes in white blood cells (WBC) of lactating sows. A total of 14 sows ($200{\pm}12kg$ of average body weight [BW]; 2.5 of average parity) were used and moved from gestation room to farrowing room on d 109 of gestation. Sows were randomly assigned to 2 dietary treatments in a completely randomized design. The treatments were a diet based on corn and soybean meal (CON) and CON added with 20% of palm kernel expellers (PKE). Sows were fed the treatments for 28 days (weaning) after farrowing. Blood was collected from each sow and 4 randomly selected piglets from each sow before farrowing or on d 3, 7, or 14 of lactation. Sows were fed respective treatments containing 0.2% chromic oxide from d 15 to 21 of lactation. Fecal samples were collected daily for the last 3 days after the 4-d adjustment period. Measurements were performances and WBC changes of sows and litter, nutrient digestibility of sows, and daily diarrhea of litter. Sows fed PKE had greater average daily feed intake (7.38 vs 7.10 kg/d; p<0.05) and lost less BW (-6.85 vs -8.54 kg; p<0.05) and backfat depth (-0.42 vs -0.71 mm; p<0.05) than those fed CON. However, there were no differences on digestibility of dry matter, nitrogen, and energy and weaning to estrus interval of sows fed either CON or PKE. Piglets from sows fed PKE gained more BW (203 vs 181 g/d; p = 0.08) and had less frequency of diarrhea (6.80 vs 8.56%; p = 0.07) than those from sows fed CON. On the other hand, no difference was found on preweaning mortality of piglets from sows fed either CON or PKE. Sows fed PKE had lower number of WBC (9.57 vs $11.82{\times}10^3/{\mu}L$; p = 0.09) before farrowing than those fed CON, but no difference on d 3 and 7. Similarly, piglets from sows fed PKE had also lower number of WBC (7.86 vs $9.80{\times}10^3/{\mu}L$; p<0.05) on d 14 of lactation than those from sows fed CON, but no difference on d 3 and 7. In conclusion, addition of 20% palm kernel expellers to lactation diet based on corn and soybean meal had no negative effects on productive performance, nutrient digestibility, and WBC changes of lactating sows.

• 마케팅과학연구
• /
• 제20권1호
• /
• pp.59-69
• /
• 2010

绿色环保或者环境意识已经成为商业、政府机关, 以及消费者和世界关注的重要问题. 针对这一情况, 韩国政府宣布, 在本世纪初, "环保建设" 将被作为一种用以鼓励与环保相关的商业活动的方式. 不同层次的韩国服装业, 提出了不同的产品环保的绿色计划. 这些服装产品包括有机产品和回收的衣服. 要想使这些公司成功, 他们需要那些, 在做产品购买,使用, 处置时, 将绿色问题(如环境的可持续性发展)作为一个人判断的一个组成部分的顾客的信息. 这些消费者可以被看成是生态学的关注者. 过去的研究已经对消费者对于环保产品的购买意愿进行了检测. 此外, 还研究了影响生态保护者或绿色消费者的因素. 但是, 只是关注生态保护者在处置或者回收利用衣服上与采购绿色产品相比较是不够的. 服装处置行为有多种途径, 消费者可以用淘汰, 传承(例如: 把它送给一个年幼的弟弟), 赠与, 交换, 出售或者简单的把他扔掉等多种方式来暂时或者永久的摆脱闲置的衣服或贷款项目. 因此, 购买环保产品的行为应该结合服装处置的行为, 从而进一步了解消费者的消费行为与对环境的态度. 本项研究的目的在于提供韩国生态保护者从有利于生态学的角度出发来购买和处理衣服的生活方式的相关信息. 本研究的目标有: 1, 基于韩国对服装处置行为进行分类; 2, 调查人 们人口统计数据, 生活方式和服装消费价值观赏的差异; 3, 在环保的时尚物品的购买意愿和影响因素之间进行比较. 自填式的调查问卷是基于以往的研究设置出来的. 问卷包括10项处置衣服的条款, 22项可持续并且健康的生活方式的条款, 以及19项消费观念的条款. 根据利克特模板的五分量表设置. 此外, 购买两个时尚物品的意愿和每个物品属性的11项特征都是根据利克特模板的七分量表而来, 两种制成羊毛套衫的可以从PET识别代码的回收瓶子中创造出来的涤纶织物这两种套衫选自一个韩国和一个美国的户外运动服装的品牌. 我们对每一种产品的简介和颜色都进行了调查, 人口统计学(即性别, 年龄, 婚姻状况, 教育程度, 收入, 职业)也被包括在内. 在2009年5月份, 研究数据通过一个专业网站的调查机构进行采集, 最后有600份调查问卷可供分析, 这个调查的受访者年龄从20到49岁不等, 平均年龄为34岁. 百分之50的调查者为男性, 大约58%的受访者是已婚者, 其中62%的受访者有大学学位. 主要成分分析和因素最大方法差的方法用以识别衣服处理规模的潜在尺度. 共有三个因素生成(比如: 倒卖行为, 捐赠行为, 不回收利用行为). 基于他们处置衣服的方式对受访者进行了分类, 群类分析被使用, 最终得到了三个部分. 不同的消费者, 被分别贴上 "转售集团", "捐资团体" 以及 "不回收组织" 的标签加以分类, 其中98%是正确的分类. 从人口统计学角度来看, 这三个类别的人在性别, 婚姻状况, 职业和年龄上有显著的差异. 健康可持续的生活方式被缩减为以下5个因素: 自我满意度, 家庭定位, 健康问题, 环境问题和自愿的服务. 这是三个群体中健康可持续的生活方式的最显著的差异. 转售集团和捐赠组表现出在健康可持续的生活方式上的相同倾向, 同时, 不回收集团在生活方式方面呈现最低的平均值. 转售和捐赠团体自称享受和满意这种生活和消费方式, 并且能够利用空余的时间陪伴家人. 另外, 这两组的人关心健康和有机食品, 并试图保护能源和资源. 对服装消费的价值观产生主要影响的三个因素是: 个人价值, 社会价值和实用价值. 因素的方差测试表明转售集团和其他两组之间的因素差异最大. 转售集团相比其他价值更关注个人价值和社会价值. 相比之下, 非回收集团比捐赠集团更关注高层次的社会价值. 比较购买环保产品的意愿上, 转售集团表现出最高的购买A类产品的意愿. 另一方面, 捐赠集团则在小市场中表现出购买B类产品的最高意愿. 此外, 平均分数表明, 购买韩国的产品(B类产品)相比购买美国的产品(A类产品)更合韩国人的心意. 多元线性回归分析法确定了对环保产品的购买的意愿对制造业产品属性的影响. 产品的设计, 价格, 贡献, 对环境的保护, 价格, 兼容性是影响转售集团的显著因素, 另外, 以及对自身形象的影响是捐赠团体的重要因素. 对于非回收集团来说, 设计, 价格等因素是相同的, 自我的形象,对环保运动的贡献, 和环境保护也是很重要的. 而价格因素具有显著性的共通性. 对于B类产品来说, 设计, 合理的价格, 形象等因素是同等的重要, 但是不同的组对购买的特征和意愿有不同的倾向. 健康可持续的生活方式以及服装消费的意向对购买A类产品和B类产品的影响同样被我们所关注. 实际操作者的健康状况和个人价值都是影响购买意愿的重要因素; 然而, 在这三个群体中说服的力度都很低. 结果表明, 分类出来的每组处理服装的行为, 显示着不同服装产品的属性, 个人价值, 和实践者的特点, 这些都影响了他们的购买环保产品的意愿, 结果会使生态保护者提出并组织更合理的生态设计的战略决策.

• 지능정보연구
• /
• 제26권4호
• /
• pp.149-171
• /
• 2020

대학생 시기는 실질적으로 직업선택을 해야 하는 시기이다. 우리 사회가 빠르게 고도로 발달하는 만큼, 직업은 다양화, 세분화, 전문화되어 대학생들의 취업 준비기간은 또한 갈수록 길어지고 있다. 본 연구는 대학생들이 학교 내외에서 하는 경험하는 다양한 활동들이 취업에 어떤 영향이 있을지 대학생들의 로그데이터를 중심으로 분석해 보았다. 실험을 위하여 학생들의 다양한 활동을 체계적으로 분류하고 활동 데이터를 6개의 핵심역량(직무전문성강화 역량, 리더십 및 팀웍 역량, 세계화 역량, 직무몰입 역량, 직업탐색 역량, 자율이행역량)으로 구분하였고, 여기서 구분된 6개의 역량 값이 취업여부(취업그룹, 미취업그룹)에 미치는 영향을 분석하였다. 분석 결과 6개의 역량 모두 취업집단과 미취업집단의 수준차이가 유의한 것을 확인할 수 있어 학교에서의 활동은 취업에 유의미함을 유추할 수 있었다. 다음으로 6개의 역량이 취업의 질적성과에 미치는 영향을 분석하기 위하여 6개의 역량수준을 상·하로 나누고, 첫연봉액을 기준으로 6개의 그룹을 만든 후 관계를 확인해 보았는데, 그 결과 6개의 역량 중 세계화역량, 직업탐색역량, 자율이행역량 수준이 높은 학생이 연봉을 기준으로 한 취업성과 또한 높은 것으로 확인되었다. 본 연구의 이론적 공헌은 다음과 같다. 첫 번째, 학창경험으로부터 추출할 수 있는 역량을 인사조직관리분야의 역량과 연결하며, 개인의 경력성공을 위해 대학생으로서 필요한 역량을 직업탐색역량과 자율이행역량을 추가하였다는 점이다. 두 번째, 활동로그의 실데이터 기반으로 각각의 역량을 측정하고 결과변수와 검증을 한 점이다. 세 번째, 양적성과(취업률)뿐만 아니라 질적성과(연봉수준)를 분석한 점이다. 본 연구의 실무적 활용은 다음과 같다. 첫 번째, 대학생들의 경력개발계획 수립 시 가이드가 될 수 있다. 전략이 없거나 균형을 갖추지 못한 또는 과도한 스펙을 쌓기는 지양하고 직업세계와 직무에 대한 분석을 바탕으로 자신의 강점을 표현할 수 있는 취업준비가 필요하다. 두 번째, 학교와 기업, 지자체, 정부 등 대학생들을 위한 행사를 기획하는 담당자는 대학생들이 필요로 하는 경험을 설계할 본 연구에서 제시한 6대 역량을 참고할 수 있다. 이벤트의 수요자인 대학생이 필요한 역량을 키우면서 하면서 각 기관의 목적을 더할 때 수요자와 공급자 모두 만족스러운 결과를 만들 수 있다. 세 번째, 디지털 대전환 시대, 국가의 균형발전을 구상하는 정부의 정책담당자는 대학생들의 호기심과 에너지를 대학생들의 역량개발과 국가의 균형발전을 함께 성취하는 방향으로 정책을 만들 수 있다. 기존에 없던 플랫폼서비스를 시도하고, 기존의 아날로그 상품이나 서비스와 기업문화를 디지털화 하는 데에는 많은 인력이 필요하며 디지털세대인 현 대학생들의 활약은 전 산업에서 촉매가 될 뿐 아니라 성공적인 경력개발을 위한 대학생들에게도 필요한 경험이라 사료된다.

• 한국조경학회지
• /
• 제40권5호
• /
• pp.100-108
• /
• 2012

통풍과 차양이 하절기 옥외공간에서 인간이 느끼는 온열쾌적성에 어떤 영향을 미치는지를 객관적으로 검증하기 위하여 통풍과 차양을 달리한 실험구를 조성하고 흑구온도와 기온 및 풍속을 측정하여 평균복사온도를 환산하여 비교 분석하였다. 미기후 측정을 위하여 개방된 잔디밭에 철제 각관을 이용하여 가로${\times}$세로${\times}$높이가 각각 $3m{\times}3m{\times}1.5m$인 프레임을 구성하고, 투명 폴리에틸렌 필름과 농업용 차광막을 이용하여 통풍과 차양의 조건을 달리한 네 가지의 실험구를 조성하였다. 각 실험구 내 중심부 지면으로부터 1.2m 높이에서 베인형 풍속계와 흑구, 측온저항체(PT-100)를 이용하여 2011년 5월 1일부터 동년 9월 30일까지 풍속과 기온, 흑구온도를 매 분 단위로 계측하였다. 기상조건과 계측자료의 유효성 등을 고려하여 총 44일 동안의 13,262건의 자료를 바탕으로 실험구별 일중 시계열적 변화를 분석하였으며, 낮 시간에 해당되는 오전 7시부터 오후 8시까지의 7,172건의 자료를 바탕으로 실험구에 따른 통계적 차이를 해석하였다. 아울러 햇볕이 가장 강렬한 시간대인 오전 11시부터 오후 4시까지의 자료를 바탕으로 평균복사온도와 풍속 및 일사량과의 관계를 분석하였다. 평균복사온도를 기준으로 해석했을 때, 통풍이 차단된 노지에서의 측정기간 중 최고값이 $58.84^{\circ}C$까지 상승한 반면, 차양이 적용되고 통풍이 원할한 실험구의 최고값은 $42.94^{\circ}C$였다. 시험결과를 종합하면, 하절기 옥외공간에서 낮 동안의 평균복사온도에 있어서 차양에 의해서는 최대 $13^{\circ}C$, 평균 $9^{\circ}C$의 냉각효과가 발생한 반면, 방풍에 의해서는 반대로 평균 약 $3^{\circ}C$의 가열효과가 있는 것으로 정리되어, 통풍이 되지 않는 태양직사광 지역은 바람이 원활하게 통하는 그림자 지역 보다 최대 $16^{\circ}C$까지 높은 것으로 나타났다. 결론적으로 본 연구를 통해서 하절기 옥외공간의 열쾌적성을 개선하는데 차양이 가장 중요하며, 그 다음이 통풍이라는 사실을 파악할 수 있었다. 따라서 옥외공간에 더 많은 녹음수와 숲을 조성하여 그림자 지역을 증가시킴으로써 인간의 하절기 옥외활동에 많은 제약을 주고 있는 불필요한 열에너지를 현격하게 저감시켜 쾌적한 미기후를 효과적으로 조성할 수 있으며, 나아가 정교하게 조성된 바람길이나 통풍 시스템을 적용한다면 도시 전체의 열환경도 효과적으로 개선할 수 있을 것이다.

• 한국해안·해양공학회논문집
• /
• 제26권1호
• /
• pp.49-64
• /
• 2014

해안 및 해양구조물 하부의 해저지반에 고파랑이 장시간 작용하는 경우 과잉간극수압(진동과잉간극수압과 잔류과잉간극수압의 합)이 크게 발생할 수 있고, 이어지는 유효응력의 감소에 따라 해저지반에 액상화가 발생될 수 있다. 일단, 지반액상화가 발생 및 진행되면 구조물의 침하 혹은 전도에 의해 종국적으로 구조물이 파괴될 가능성이 높아진다. 특히, 중력식구조물이 설치된 하부지반내에서는 파작용에 의한 큰 과잉간극수압과 작은 유효응력으로 부터 발생되는 지반액상화의 여부를 정확히 예측할 필요가 있고, 이러한 지반의 동적거동 특성은 설계에 충분히 반영되어야 한다. 본 연구에서는 2차원수치파동수로를 불규칙파동장으로 확장한 수치해석법을 적용하여 해저지반상 및 구조물의 표면상에서 시간변동의 동파압과 유속에 의한 전단응력을 산정하고, 그 결과를 지반의 동적거동을 정밀하게 재현할 수 있는 해저지반응답용의 수치해석프로그램 FLIP(Finite element analysis LIquefaction Program)에 입력치로 적용하여 해저지반내에서 과잉간극수압 및 유효응력의 시공간적인 변화, 이로 인한 액상화, 그리고 지반의 시간변형과 구조물의 시간변위를 정량적으로 평가한다. 이로부터 해저면상에서 전단응력을 고려한 경우 구조물 전면의 하부해저지반에서 액상화 가능성을 확인할 수 있었고, 액상화된 토립자는 흐름에 저항력을 상실하므로 세굴로 이어질 것으로 판단된다. 따라서, 태풍시 고파랑의 작용이 장시간 지속되는 경우 구조물의 전면에서는 지반액상화로 인한 지반강도의 현저한 저하로 구조물의 진동변위가 더욱 크게 발생되고, 더불어 구조물의 안정성에 영향을 미칠 것으로 예상된다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제26권9호
• /
• pp.1320-1328
• /
• 2013

Three experiments were conducted to evaluate the ME value, standardized ileal digestibility (SID) of amino acids (AA) of fish meal, and the effects of single cell protein (Prosin and Protide) replacing fish meal in diet on growth performance, nutrient digestibility and intestinal morphology in weaned piglets. In Exp. 1, twenty-four barrows with initial BW of $30.8{\times}2.6kg$ were allotted to one of four dietary treatments. Diet 1 contained corn as the only energy source. The other three diets replaced 20% of the corn in diet 1 with one of the three protein feeds (fish meal, Prosin and Protide), and the DE and ME contents were determined by difference. In Exp. 2, eight barrows (initial BW of $25.6{\pm}3.2kg$) were fitted with ileal T-cannulas and allotted to a replicated $4{\times}4$ Latin square design. Three cornstarch-based diets were formulated using each of the protein feeds as the sole source of AA. A nitrogen-free diet was also formulated to measure endogenous losses of AA. In Exp. 3, one hundred and eighty piglets (initial BW of $7.95{\pm}1.59kg$) weaned at $28{\times}2d$ were blocked by weight and assigned to one of five treatments for a 28-d growth performance study, each treatment was fed to six pens with six pigs (three barrows and three gilts) per pen. The five treatments consisted of the control group (CON), which was a corn-soybean meal diet containing 5% fish meal, and the other four treatments, which replaced a set amount of fish meal with either Prosin (2.5% or 5%) or Protide (2.5% or 5%). The diets were formulated to provide same nutrient levels. The results showed that on a DM basis, both of the DE and ME contents were lower in Prosin and Protide than that of fish meal (p<0.05). The SID of CP and all essential AA were greater in fish meal than in Prosin and Protide (p<0.05). The pigs fed CON diet had greater weight gain and lower feed conversion rate (FCR) than pigs fed 5% Prosin and 5% Protide diets (p<0.05). The digestibility of CP was greater in pigs fed CON, 2.5% Prosin and 2.5% Protide diets than the pigs fed 5% Prosin and 5% Protide diets (p<0.05). Villus height in jejunum and ileum, and villus height to crypt depth ratio in the jejunum were higher (p<0.05) in pigs fed CON, 2.5% Prosin and 2.5% Protide diets compared with the 5% Prosin and 5% Protide diets. Pigs fed CON diet had greater villus height to crypt depth ratio in the ileum than the pigs fed 5% Prosin and 5% Protide diets (p<0.05). In conclusion, although Prosin and Protide contained lower ME content and SID of AA than fish meal, Prosin and Protide replacing 50% of fish meal in diet with identical nutrient levels could obtain similar performance, nutrient digestibility and intestinal morphology in weaned pigs.

• Journal of Nutrition and Health
• /
• 제50권1호
• /
• pp.74-84
• /
• 2017

본 연구에서는 2013년 국민건강영양조사 자료를 이용하여 30~64세 무직을 제외한 근로자 1,750명 (남성 892명, 여성 858명)을 대상으로 화이트칼라와 블루칼라로 직업군을 분류하였으며 이를 통해 직업군에 따른 대사증후군의 구성요소와 유병률 및 영양 상태를 비교 연구하였다. 그 결과 대사증후군 영향 요인으로 작용하는 사회경제적 지표인 교육수준과 소득수준에서 남녀 모두 화이트칼라가 블루칼라보다 높았다. 대사증후군 유병률을 살펴보았을 때, 남성의 경우 블루칼라 35.1%, 화이트칼라 26.8%로 블루칼라가 화이트칼라보다 높게 나타났으며, 여성의 경우 블루칼라 24.8%, 화이트칼라 8.9%로 블루칼라가 화이트칼라보다 대사증후군 유병률이 높았다. 남녀를 비교하였을 때는 여성보다 남성에서 대사증후군 유병률이 높은 것으로 나타났다. 대사증후군 구성요소의 유병률에서는 남성의 경우 고혈당이 블루칼라가 화이트칼라보다 유의적으로 유병률이 높았으며 여성의 경우 복부 비만, 고혈압, 고혈당, 고중성지방혈증, 저HDL콜레스테롤혈증 모두 블루칼라가 화이트칼라보다 유의적으로 유병률이 높았다. 음식군별 1회 섭취량을 고려하여 주당 섭취빈도를 살펴본 결과 직업군별 남성의 경우 블루칼라가 화이트칼라보다 밥류의 주당 섭취빈도가 많았으며 빵 떡류의 주당 섭취빈도는 화이트칼라가 블루칼라보다 유의적으로 많이 섭취하였다. 여성의 경우는 블루칼라가 화이트칼라보다 국 찌개류의 주당 섭취빈도가 많았으며 과일류의 주당 섭취빈도는 화이트칼라가 블루칼라보다 유의적으로 많이 섭취하였다. 영양소 섭취량은 총 에너지 섭취량을 제외한 나머지 영양소 섭취량에서 남녀 모두 화이트칼라가 블루칼라보다 많이 섭취하였다. 따라서 본 연구 결과 남녀 모두 대사증후군 유병률은 블루칼라가 화이트칼라보다 높았으며 특히, 여성의 블루칼라에서 대사증후군과 그 구성요소의 유병률 비율이 높게 나타나 대사증후군 중재 및 예방을 위한 영양교육이 필요할 것이다. 또한, 남녀 모두 블루칼라가 화이트칼라보다 영양소 섭취 및 식사의 질이 전반적으로 저조한 것으로 나타나 블루칼라의 올바른 식습관 개선이 필요하다고 사료된다. 결론적으로 본 연구를 통해 성별에 따른 직업유형별 대사증후군 유병률과 영양소 섭취 상태가 상이하므로 이를 고려한 근로자들의 질병 예방을 위한 맞춤형 영양교육 서비스가 필요하다고 사료된다.

• 한국응용과학기술학회지
• /
• 제35권4호
• /
• pp.1108-1119
• /
• 2018

대기오염에 대한 관심은 국내 외에서 점진적으로 상승하고 있으며, 자동차 및 연료 연구자들은 청정(친환경 대체연료) 연료와 연료품질 향상 등을 위해 새로운 엔진 설계, 혁신적인 후 처리 시스템 등의 많은 접근을 통하여 차량 배출가스와 온실가스를 감소시키려고 노력하고 있다. 이러한 연구들은 주로 차량의 배출가스 (규제 및 미규제물질, PM 입자 배출 등)와 온실가스의 두 가지 이슈로 진행되고 있다. 자동차의 배출가스는 환경오염과 인체에 악영향을 주는 많은 문제를 일으키고 있다. 이러한 배출가스를 줄이기 위하여 각국에서는 배출가스 시험모드를 새로 만들어 규제하고 있다. 2007 년부터 UN ECE의 WP.29 포럼에서 배출가스 인증을 위한 전 세계의 조화된 light-duty 차량 시험 절차 (WLTP)가 개발되었다. 이 시험 절차는 유럽과 동시에 국내 light-duty 디젤 차량에도 적용되어졌다. Light-duty 차량의 대기오염 물질 배출량은 거리 당 무게로 규제되어 있어 주행주기가 결과에 영향을 미칠 수 있다. 차량의 배출가스는 주행 및 환경조건, 주행습관 등에 따라 크게 달라진다. 극단적인 외기온도는 배출가스를 증가시키는데, 이것은 더 많은 연료가 실내를 가열하거나 냉각해야하기 때문이다. 또한 높은 주행속도는 증가된 항력을 극복하기 위해 필요한 에너지로 인해 배출가스 량을 증가시킨다. 일반적으로 상승하는 차량속도와 비교할 때, 급격한 차량가속도도 배출가스를 증가시킨다. 부가적인 장치 (에어컨 또는 히터)와 도로경사 또한 배출가스를 증가시킨다. 본 연구에서는 3대의 light-duty 차량을 가지고 light-duty 차량의 배출가스 규제에 사용되는 WLTP, NEDC 및 FTP-75로 시험을 하였으며, 배출가스가 다른 주행 사이클에 의해 얼마나 많은 영향을 받을 수 있는지를 측정하였다. 배출 가스는 통계적으로 의미있는 차이를 보이지 않았다. 최대 배출 가스는 주로 냉각 된 엔진 조건에 의해 야기되는 WLTP의 저속 단계에서 발견된다. 냉각 된 엔진 상태에서 배출가스의 양은 시험 차량과 크게 다르다. 이는 WLTP 구동 사이클에 대처하기 위해 다른 기술적 솔루션이 필요하다는 것을 의미한다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.