• Membrane and Water Treatment
• /
• 제14권1호
• /
• pp.11-18
• /
• 2023

This work addresses the development of microfiltration ceramic membrane from alumina using extrusion method. The membranes were sintered at different temperatures ranging between 1000 and 1300℃. The alumina was characterized with thermogravimetric analysis, particle size distribution, X-ray diffraction, Fourier transform infrared spectrometer and scanning electron microscope analysis. Subsequently, the effect of sintering temperature on the membrane properties such as porosity, flexural strength, and pure water permeability was investigated and optimized for the sintering temperature. It is observed that with increasing sintering temperature, the porosity of the membranes decreases and the flexural strength, and pure water permeability of the membranes increase. The uncoated and coated membranes were compared at constant flux mode of filtration. Under the turbidity solution recirculation alone at 100 NTU, trans-membrane pressure (TMP) of uncoated membrane remained constant when the filtration flux was below 121 Lm^-2 h ^-1 , while the coated membrane was 111 Lm_-2 h ^-1 . Although suction pressure increased more rapidly at higher turbidity, coated membrane filtration showed better removal efficiency of the turbidity.

• 자원ㆍ환경경제연구
• /
• 제16권2호
• /
• pp.275-311
• /
• 2007

수소에너지는 비고갈성 청정에너지로 향후 탄소기반의 에너지 시스템을 대체할 에너지로 주목받고 있다. 정부의 장기적인 비전도 수소에너지의 최종에너지 수요 비중을 2040년까지 15%로 확대한다는 것이나 이를 달성하기 위해서는 200조 원이 넘는 엄청난 비용이 수반된다. 본 연구는 동태 CGE 모형을 적용하여 수소에너지 보급에 따라 한국경제에 어떤 영향을 미칠 것인지를 분석하였다. 프런티어 기술로서 수소에너지는 학습효과와 에너지원간 상보성(complementarity)의 영향으로 정부지원 없이는 2040년 기준으로 최종에너지 수요의 6.5%에 그칠 전망이나 정부가 수소에너지에 대해 각각 10%, 20%, 30%의 가격보조 정책을 실시할 경우 9.2%, 15.2%, 37.7%로 증가할 것으로 분석되었다. 즉, 정부개업을 통해 수소기술 확산 지연 현상이 크게 완화될 수 있음을 보여주는 것이다. 한편 수소기술의 주요 응용분야인 수송부문의 성장이 두드러지나 수송 연료의 대부분을 차지하는 석유가 수소에너지로 대체됨으로써 석유부문에 대한 소비가 감소하고, 발전부문의 비중도 감소하는 것으로 나타났다. 정부의 가격보조가 가계소득에서 충당되는 것으로 가정했기 때문에 가격하락에 의한 소비증가효과가 소득감소에 따른 소비감소에 의해 상쇄되면서 가계의 최종소비도 부정적 영향을 받는 것으로 분석되었다. 그러나 전반적인 생산, 투자, 수출 증가에 힘입어 GDP 수준은 소폭 성장하다가 2040년 무렵에 소폭 감소하여 경제 전반에 미치는 영향은 미미할 것으로 분석되었다.

• 한국수소및신에너지학회논문집
• /
• 제32권4호
• /
• pp.271-276
• /
• 2021

Although the development of electric vehicles or electric commercial vehicles is underway in Korea, most companies are seeking to enter the global market because it is difficult to expand their business only in the domestic market. In addition, it is recognized that the country has difficulties in responding to regulations or related procedures when entering overseas markets, and due to such difficulties, it is not possible to gain opportunities to enter the market and gain the technical advantage. Therefore, it is necessary to support individual companies to overcome the difficulties of promoting and exporting products by establishing a pre-cycle support environment for technology development so that development parts can be installed in small electric commercial vehicles. Therefore, this study tried to understand the necessity and factors of small electric commercial vehicles for major ASEAN countries, and as a result, most of them raised the urgency and necessity of joint research.In addition, human resource development, government support, and technical support were suggested as the necessary factors for the study.

• 유통과학연구
• /
• 제21권7호
• /
• pp.41-50
• /
• 2023

Purpose: The purpose of the research is identified factors influencing the competitiveness of the copper industry in Kazakhstan. Research design, data and methodology: A few studies are dedicated to the analysis in developing countries, particularly Kazakhstan. The algorithm was chosen for research provision: statistical and comparative analysis, correlation, and regression analysis. The data of 1999-2021 obtained from the World Bank, Bureau of National Statistics, National Bank of Kazakhstan. Results: The obtained results demonstrate the trends in the development of the industry since 2000. The development of the copper industry is strongly influenced by the distribution and state of the business environment, economic situation, and trends in the global commodity markets. Conclusions: According to econometric modeling, there is a correlation between the profitability of the copper industry, GDP, copper prices, liquidity, and energy resource prices. Trends in global commodity and energy markets have a significant impact on the state of the industry. Further research should be conducted to include an analysis and forecast of internal factors that may affect the development of the industry, such as copper reserves, condition of fixed assets, government programs, etc. It is also important to examine the correlation with the trends in the development of the global green economy and the revival of the Chinese market.

• 신재생에너지
• /
• 제4권4호
• /
• pp.23-29
• /
• 2008

Wind farm development project contains high business risks because that a wind farm, which is to be operating for 20 years, has to be designed and assessed only relying on a year or little more in-situ wind data. Accordingly, long-term correction of short-term measurement data is one of most important process in wind resource assessment for project feasibility investigation. This paper shows comparison of general Measure-Correlate-Prediction models and neural network, and presents new method using neural network for increasing prediction accuracy by accommodating multiple reference data. The proposed method would be interim step to complete long-term correction methodology for Korea, complicated Monsoon country where seasonal and diurnal variation of local meteorology is very wide.

• 한국태양에너지학회 논문집
• /
• 제23권2호
• /
• pp.9-19
• /
• 2003

This study aims to propose Green Remodelling methods of apartment houses in Korea. Through the literature review and case studies various 'Green' Remodelling elements including environmental friendly technologies were identified and classified. Design strategies and remodeling techniques which could increase energy efficiency, reduce water and resource use, improve air qualify, improve landscape management, and improve maintenance were also investigated. Then, 'Green remodelling' methods of apartment houses are proposed as the des19n methodology of remodeling for sustainable development. The green Remodeling design methods and elements proposed by this study are proved to be simple, easy and flexible ways to enhance the environmental sustainability of the existing building.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.191-191
• /
• 2010

As many researchers want to predict or assess more about wind condition and wind power generation, CFD(Computational Fluid Dynamics) analysis method is very good way to do predict or assess wind condition and power generation. But CFD analysis is needed much knowledge of aerodynamics and physical fluid theory. In this paper, Auto-Wind CFD analysis program will be introduced. User does not need specific knowledge of CFD or fluid theory. This program just needs topographical data and wind data for initial condition. Then all of process is running automatically without any order of user. And this program gives for user to select and set initial condition for advanced solving CFD. At the last procedure of solving, Auto-Wind program shows analysis of topography and wind condition of target area. Moreover, Auto-Wind can predict wind power generation with calculation in the program. This Auto-Wind analysis program will be good tool for many wind power researchers in real field.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 춘계학술발표대회 논문집
• /
• pp.277-280
• /
• 2009

Wind monitoring system is an absolutely-required system for assessing a performance and fatigue load of the wind energy generator in an on-shore wind energy experimental research complex. It was implemented for the purpose of monitoring the wind information measured from a meteorological tower at the monitoring house and of utilizing the measured data for the performance assessment, by using the LabVIEW program. Then, by adding the performance assessment-related data acquired from the wind energy generator during the performance assessment and the data recorder for synchronizing the data of meteorological tower, the system was implemented. Because it transmitted the data by converting the output 'RS-232' of data logger which measures the wind condition into CAN protocol, the data error rate was minimized, This paper is intended to explain the developed wind data monitoring system.

• 공업화학
• /
• 제3권2호
• /
• pp.189-193
• /
• 1992

The success of 3M's worldwide Pollution Prevention Pays (3P) Program convinced 3M's top management that the program should be expanded into a comprehensive environmental management system called 3P Plus. The emphasize of the 3P Plus program is to continually minimize the environmental impact of 3M processes, products, and operations to include energy management, resource recovery, and other initiatives. 3M's experience with the 3P and 3P Plus programs will be described. 3M's experience can serve as a model for other multi-national companies interested in sustainable development and economic growth with environmental protection.

• 광물과 암석
• /
• 제35권1호
• /
• pp.75-81
• /
• 2022

글로벌 광물에너지자원 분야 수요공급에서 중국의 자원조사탐사개발과 자원경제 정책이 한국의 산업 경쟁력과 밀접하므로, 중국의 자원관련 활동을 분석하는 것은 국내외 자원개발 전략수립에 매우 중요한 사항이라고 할 수 있다. 중국은 2020년에 광물자원관련 법제 개정과 표준을 정하면서 광물자원 탐사개발과 매장량 관리의 효율성을 기하고 있다. 중국 자연자원부는 국가광물자원계획(2021~2025년)의 수립을 통해 국가차원의 목표와 전략을 달성하고자 하며, 각 급 지방정부에서도 지역광물자원계획을 수립하여 시행하고 있다. 이를 통해, 지질광물탐사 활동 감독 및 관리가 강화되었고, 지질광물 탐사개발분야 산업의 생산 관리의 안전성이 강화되었다. 중국은 고품질의 지질탐사, 측량 및 지도 작성 지침개발을 통해, 중국의 지질광물탐사개발 수준을 향상시키고 광업 감독관리 체계 강화를 기하고 있다. 중국의 고체광물자원 매장량분류와 석유가스광물자원 매장량분류 등의 광물자원 표준 마련으로 중국내 새로운 매장량 관리 표준체계가 구축되어 과학적인 광물자원 자원량과 매장량의 파악 및 합리적 관리와 이용 등이 개선될 것으로 여겨진다.