• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.361-361
• /
• 2007

• Journal of the Korean Society for Nondestructive Testing
• /
• v.35 no.5
• /
• pp.332-340
• /
• 2015

Acoustic emission (AE) is an effective nondestructive test that uses transient elastic wave generated by the rapid release of energy within a material to detect any further growth or expansion of existing defects. Over the past decades, because of environmental issues, the use of compressed natural gas (CNG) as an alternative fuel for vehicles is increasing because of environmental issues. For this reason, the importance and necessity of detecting defects on a CNG fuel tank has also come to the fore. The conventional AE method used for source location is highly affected by the wave speed on the structure, and this creates problems in inspecting a composite CNG fuel tank. Because the speed and dispersion characteristics of the wave are different according to direction of structure and laminated layers. In this study, both the conventional AE method and the energy based contour map method were used for source location. This new method based on pre-acquired D/B was used for overcoming the limitation of damage localization in a composite CNG fuel tank specimen which consists of a steel liner cylinder overwrapped by GFRP. From the experimental results, it is observed that the damage localization is determined with a small error at all tested points by using the energy based contour map method, while there were a number of mis-locations or large errors at many tested points by using the conventional AE method. Therefore, the energy based contour map method used in this work is more suitable technology for inspecting composite structures.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2003.11a
• /
• pp.159-164
• /
• 2003

• 한국태양에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.342-347
• /
• 2011

Solar energy is attenuated by absorbing gases (ozone, aerosol, water vapour and mixed gas) and cloud in the atmosphere. And these are measured with solar instruments (pyranometer, phyheliometer). However, solar energy is insufficient to represent detailed energy distribution, because the distributions of instruments are limited on spatial. If input data of solar radiation model is accurate, the solar energy reaches at the surface can be calculated accurately. Recently a variety of satellite measurements are available to TERA/AQUA (MODIS), AURA (OMI) and geostationary satellites (GMS-5, GOES-9, MTSAT-1R, MTSAT-2 and COMS). Input data of solar radiation model can be used aerosols and surface albedo of MODIS, total ozone amount of OMI and cloud fraction of meteorological geostationary satellite. The solar energy reaches to the surface is calculated hourly by solar radiation model and those are accumulated monthly and annual. And these results are verified the spatial distribution and validated with ground observations.

• Journal of the Korean Society of Safety
• /
• v.14 no.2
• /
• pp.42-51
• /
• 1999

This research deals with the non-linearities associated with impact and sliding for the rocking behavior of rigid block subjected to two dimensional excitation of horizontal and vertical direction. The non-linearities examined of impact between block and base: The transition of two governing rocking equations, the abrupt reduction in kinetic energy associated with impact. In this study, the rocking vibration system of two types are considered for several friction condition. One is the undamped rocking vibration system, disregarding energy dissipation at impact and the other is the damped rocking system, including energy dissipation at impact. The response analysis by non-dimensional rocking equation is carried out for the change of excitation amplitude. The chaos responses were discovered in the wide response region, particularly, in the case of high vertical excitation and their chaos characteristics are examined by Poincare map, power spectra and Lyapunov Exponent. The complex behavior of chaos response, in the phase space, were illustrated by Poincare map. Therefore, Poincare map will be a significant material in order to understand chaos of rocking system.

• Journal of Korean Society of Rural Planning
• /
• v.19 no.2
• /
• pp.121-128
• /
• 2013

The greenhouse gas emission according to the energy consumption is the cause of global warming. With various climates, it is occurs the direct problems to ecosystem. The various studies are being to reduce the carbon dioxide, which accounts for more than 80% of the total greenhouse gas emissions. In this study, estimate the carbon usage using potential biomass extracted from forest type map according to land-use by satellite image, and estimate the amount of carbon dioxide, according to the energy consumption of urban area. The $CO_2$ adsorption is extracted by the amount of forest based on the direct absorption of tree, the other used investigated value. The $CO_2$ emission in Jecheon was 3,985,900 $TCO_2$ by energy consumption. At the land cover classification, the forest is analyzed as 624,085ha and the farmland is 148,700ha. The carbon dioxide absorption was estimated at 1,834,850 Tons from analyzed forest. In case of farmland, it was also estimated at 706,658 Tons.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.3
• /
• pp.210-217
• /
• 2003

We introduced a scheme for finding an optimal data association matrix that represents the relationships between the measurements and tracks in multi-target tracking (MIT). We considered the relationships between targets and measurements as Markov Random Field and assumed a priori of the associations as a Gibbs distribution. Based on these assumptions, it was possible to reduce the MAP estimate of the association matrix to the energy minimization problem. After then, we defined an energy function over the measurement space that may incorporate most of the important natural constraints. To find the minimizer of the energy function, we derived a new equation in closed form. By introducing Lagrange multiplier, we derived a compact equation for parameters updating. In this manner, a pair of equations that consist of tracking and parameters updating can track the targets adaptively in a very variable environments. For measurements and targets, this algorithm needs only multiplications for each radar scan. Through the experiments, we analyzed and compared this algorithm with other representative algorithm. The result shows that the proposed method is stable, robust, fast enough for real time computation, as well as more accurate than other method.

• Atmosphere
• /
• v.20 no.2
• /
• pp.195-210
• /
• 2010

This study uses mesoscale model WRF to investigate characteristics of wind fields in South Korea, a region with a complex terrain. Hourly wind fields were simulated for one year representing mean characteristics of an 11-year period from year 1998 to year 2008. The simulations were performed on a nested grid from 27 km down to 1 km horizontal resolution. Seasonal variation of wind speed indicates that wind is strongest during the spring and winter seasons. Spatial distribution of mean wind speed shows wind energy potential at its peak in mountainous region of Gangwon-do, the east coast, and Jeju Island. Wind speed peaks at night in mountainous and eastern coastal regions, and in the afternoon inland and in the southwestern coastal region. The simulated wind map was verified with four upper-air sounding observations. Wind speed was shown to have a more pronounced overestimation tendency relative to observation in the winter rather than summer. The results of this wind mapping study help identify locations with the highest wind energy potential in South Korea.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.11
• /
• pp.2687-2690
• /
• 2009

Due to the importance of isoflavone content in soybean extracts, the microwave-assisted process (MAP) was compared to the conventional extraction methods. For comparison of the three methods, all extraction parameters (solvent, sample to solvent ratio, temperature, etc.) were kept the same; the microwave extractor was operated at 187.5 W with an emission frequency of 2450 MHz under atmospheric pressure conditions and the extractions were carried out at 75 ${^{\circ}C}$ for 3 min while the conventional reflux was at 75 ${^{\circ}C}$ for 3 h. Total yield and crude isoflavone content were determined by ultraviolet spectrophotometric and compared with the three methods. Results indicated that the MAP was comparable to the conventional method in its capability to extract target compounds without causing any degradation; in addition it dramatically reduced the extraction time from 3 h to a few minutes, suggesting that it can be an alternative technique to the time-consuming conventional reflux method.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.5
• /
• pp.153-163
• /
• 2004

This paper presents a video tracking method for a deformable moving object using an active contour model in the image sequences. It is quite important to decide the local convergence directions of the contour points for correctly extracting the boundary of the moving object with deformable shape. For this purpose, an energy function for the active contour model is newly proposed by adding a directional energy term using a frame difference map to tile Greedy algorithm. In addition, an updating rule of tile frame difference map is developed to encourage the stable convergence of the contour points. Experimental results on a set of synthetic and real image sequences showed that the proposed method can fully track the deformable object while extracting the boundary of the object elaborately in every frame.