• Nuclear Engineering and Technology
• /
• 제53권1호
• /
• pp.337-343
• /
• 2021

In this work, self-absorption correction factor related to the variation of the composition and the density of soil samples were evaluated using the p-type HPGe detector. The validated MCNP5 simulation model of this detector was used to evaluate its Full Energy Peak Efficiency (FEPE) under the variation of the composition and the density of the analysed samples. The results indicates that FEPE calculation of low gamma ray is affected by the composition and the density of soil samples. The self-absorption correction factors for different gamma-ray energies which was fitted as a function of FEPEs via density and energy and fitting parameters as polynomial function for the logarithm neper of gamma ray energy help to calculate quickly the detection efficiency of detector. Factor Analysis for the influence of the element composition in analysed samples on the FEPE indicates the FEPE distribution changes from non-metal to metal groups when the gamma ray energy increases from 92 keV to 238 keV. At energies above 238 keV, the FEPE primarily depends only on the metal elements and is significantly affected by aluminium and silicon composition in soil samples.

• International Journal of Safety
• /
• 제2권1호
• /
• pp.1-6
• /
• 2003

In this paper, several different fracture criteria using the Eftis and Subramanian's stress solutions [1] are compared with the printed experimental results under different loading conditions. The analytical results of using the solution with non-singular term show better than without non-singular in comparison with the experimental data. And maximum tangential stress criterion (MTS) and maximum tangential strain energy density criterion (MTSE) can get useful results for several loading conditions.

• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제18권1호
• /
• pp.79-86
• /
• 2011

Suppose that (M,g) is a complete and noncompact Riemannian mani-fold with Ricci curvature bounded below by $-K{\leq}0$ and (N, $\bar{g}$) is a complete Riemannian manifold with nonpositive sectional curvature. Let u : $M{\times}[0,{\infty}){\rightarrow}N$ be the solution of a heat equation for harmonic map with a bounded image. We estimate the energy density of u.

• Bulletin of the Korean Chemical Society
• /
• 제22권5호
• /
• pp.499-502
• /
• 2001

Unexpectedly, the brightest row was known to represents the lowest lying Te atoms in the STM image of NbTe2. Projected density of states and crystal orbital overlap population show that the 5pz orbital of the lowest lying Te(2) atom doe s not interact with the 4d orbital of Nb strongly so that the 5pz band remains in the vicinity of the Fermi energy. Consequently the lowest lying Te(2) atoms contribute higher electron density near the Fermi energy which in turn exhibits brightest image in the STM experiments.

• 한국전기전자재료학회논문지
• /
• 제13권1호
• /
• pp.60-65
• /
• 2000

The structural and electrical characteristics of PLZT thin films fabricated onto Pt/Ti/SiO\ulcorner/Si substrates by a pulsed laser deposition were investigated to develop the high dielectric thin films were fabricated with different energy density by pulsed laser deposition. This PLZT thin films of 5000 thickness were crystallized at 600 $^{\circ}C$, 200 mTorr O\ulcorner pressure for 2 J/$\textrm{cm}^2$ laser energy density, the arain structure was transformed from planar to columnar grain. It was clearly noted from the SEM observations that oxygen pressured laser powers affect microstructures of the PLZT thin films. 14/50/50 PLZT this film showed a maximum dielectric constant value of $\varepsilon$\ulcorner=1289.9. P-E hysteresis loop of 14/50/50 PLZT thin film was flim ferro-electric. Leakage current density of 14/50/50 PLZT thin film was 10\ulcorner A/$\textrm{cm}^2$.

• 천문학회지
• /
• 제19권1호
• /
• pp.33-49
• /
• 1986

Radial distribution of internal density has been determined for thirteen subclouds in the three giant molecular cloud complexes accompanying Mon OB1, Mon OB2 and CMa OB1 associations, We modeled their radial density structures with the density distribution of isothermal gas spheres. Most of the subclouds, nine out of the thirteen, are well described by isothermal spheres of single component; while the rest four require an additional component. Total mass and potential energy of each subcloud are also derived from the radial density structure; thermal energy and internal velocity dispersion required for sustaining the density structure are deduced from the isothermal gas model. Our derived masses of the clouds are comparable to the values determined by Blitz (1978) under LTE assumption. This agreement suggests that the correction factor for non-LTE effect on mass-estimate is not far from unity. The ratio of the gravitational potential energy to the kinetic energy of thermal motion is as large as 250; hence the thermal motion alone cannot support these clouds against the gravity. Being supported by turbulence motion with velocities of six to seven times the thermal velocity, the clouds of one-component type seem to be in equilibrium with the gravity; while the clouds of two-component type are likely to be in the stage of gravitational collapse.

• 한국안전학회지
• /
• 제23권6호
• /
• pp.21-27
• /
• 2008

Polypropylene(PP) foams are widely used as protective materials such as automotive bumper and safety helmet, but whose dynamic behaviour are not well defined. In this paper, the compression tests by Split Hopkinson Pressure Bar were conducted to obtain the stress-strain curve and to investigate the effect of density on the absorption of impact energy in the PP foams. Three kinds of foams were chosen depending upon the density. The result of the experiment has revealed that the stiffness of the low-density PP foam is remarkably increased at high strain rate compared with that of the high-density PP foam. And it is also shown that the absorption of impact energy are greatly influenced by the density of PP foam. These results are expected to be utilized for the development of a protective structure with polymer foams.

• 한국환경과학회지
• /
• 제6권4호
• /
• pp.313-322
• /
• 1997

한국수영만에서 잔차류장의 운동 위치에너지의 계절변화를 연구하기 위하여 우리는 에너지의 수지를 계산하고 조석에너지와 비교했다. 위치에너지는 겨울과 봄철에 크며, 밀도성층이 형성된 여름과 초가을에 작게 나타났다. 잔차류의 운동에너지는 계절적인 변화를 보이고 있으며, 단위면 적당 잔차류의 평균 운동에너지는 6.4$\times$$10^{-4}ergs s^{-1}cm^{-}2$이다. 수영 만에서 잔차류장의 계절변동은 조석잔차류의 운동에너지가 밀도류나 취송류의 운동에너지보다 큰 11월을 제외하고는 밀도류가 지배하고 있다. 잔차류의 주성분인 조석잔차류, 취송류 및 밀도류의 운동에너지의 평균백분율은 잔차류의 운동에너지에 대하여 각각 29.1%, 3.4%, 67.5% 이다. 단위면적당 잔차류의 운동에너지, 위치에너지 및 조석에너지의 비는 각각 1.0 : 6.7$\times$$10^3$ : 8.2$\times$$10^4$ 이다.

• 대한임베디드공학회논문지
• /
• 제10권6호
• /
• pp.381-390
• /
• 2015

The efficient design of a transport protocol contributes to energy conservation as well as performance improvement in wireless sensor networks (WSNs). In this paper, a node-density-aware transport protocol (NDTP) for intra-cluster transmissions in WSNs for monitoring physical attributes is proposed, which takes node density into account to mitigate congestion in intra-cluster transmissions. In the proposed NDTP, the maximum active time and queue length of cluster heads are restricted to reduce energy consumption. This is mainly because cluster heads do more works and consume more energy than normal sensor nodes. According to the performance evaluation results, the proposed NDTP outperforms the conventional protocol remarkably in terms of network lifetime, congestion frequency, and packet error rate.

• 전기화학회지
• /
• 제9권4호
• /
• pp.151-157
• /
• 2006

A two-dimensional numerical model to study the performance of anode-supported flat-tube solid oxide fuel cell (SOFC) far the cross section of the cell in the flow direction of the fuel and air flows is developed. In this model a mass and charge balance, Maxwell-Stefan equation as well as the momentum equation by using, Darcy's law are applied in differential form. The finite element method using FEMLAB commercial software is used for meshing, discritization and solving the system of coupled differential equations. The current density distribution and fuel consumption as well as water production are analyzed. Experimental data is used to verify a predicted voltage-current density and power density versus current density to judge on the model accuracy.