• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.438-442
• /
• 2006

The degradation of Nafion membrane by hydrogen peroxide was investigated in polymer electrolyte membrane fuel cell (PEMFC). Degradation tests were carried out in a solution of $10{\sim}30%$ hydrogen peroxide containing 4ppm $Fe^{2+}$ ion which is well known as Fenton's reagent at $80^{\circ}C$ for 48hr. Characterization of degraded membranes were examined through the IR, Water-uptake, Ion exchange capacity, mechanical strength and $H_2$ permeability. After degradation, C-F, S-O and C-O chemical bonds of membrane were broken by radical formed by $H_2O_2$ decomposition. Breaking of C-F bond which is the membrane backbone reduced the mechanical strength of Nafion membrane and hence induced pinholes, resulting in increase of $H_2$ crossover through the membrane. Also the decomposition of C-O and S-O, side chain and terminal bond of membrane, decreased the ion exchange capacity of the membrane.

• Korean Journal of Materials Research
• /
• v.16 no.5
• /
• pp.318-322
• /
• 2006

Short-term high temperature degradation test was conducted on Hastelloy X, a candidate tube material for high temperature gas-cooled reactors (HTGR), to evaluate the variation of microstructure and mechanical property in air at $1050^{\circ}C$ during 2000 h. The dominant oxide layer was Cr-oxide and a very shallow Cr-depleted region was observed below the oxide layer. At the beginning of degradation, the island shape $M_6C$ precipitate (M=Mo-rich, Fe, Ni, Cr) was observed in matrix region. After 2000 h degradation, precipitate shape was changed to the chain shape and increased amount of precipitate. These results influenced mechanical property of the specimen which exposed in high temperature. Yield strength was decreased from 115MPa to 89 MPa after 24 h and 2000 h exposure, respectively.

• Journal of Microbiology and Biotechnology
• /
• v.7 no.1
• /
• pp.43-48
• /
• 1997

Three strains capable of degrading a chlorophenol were isolated by selective enrichment from soils contaminated with industrial wastewater. A Pseudomonas solanacearum TCP114 could use 2,4,6-trichlorophenol (TCP) as sole carbon and energy source, while two strains of Pseudomonas testosteroni CPW301 and Arthrobacter ureafaciens CPR706 could use 4-CP. All isolates also grew well on phenol. The degradation of one component by a pure strain was strongly affected by the presence of other compounds in the medium, CPW301 and CPR706 entirely lost the ability to degrade 4-CP and phenol in the presence of TCP. TCP114 also lost the ability to degrade phenol when 4-CP was added to the culture medium. These restrictions on the degradability could be overcome by employing defined mixed cultures (TCP114 and one strain of 4-CP degrading strains). All three components were successfully degraded by defined mixed cultures through their cooperative activities. It was also demonstrated that defined mixed cultures could be immobilized by using calcium alginate for the semi-continuous degradation of the three component mixture. Immobilization could not only accelerate the degradation rate, but also allowed the reuse of the cell mass several times without loss of the cells' degrading capabilities.

• Archives of Pharmacal Research
• /
• v.24 no.2
• /
• pp.159-163
• /
• 2001

The accelerated stability of dimethoxy biphenyl monocarboxylate.HCl (DDB-S) was investigated in 6 mg/mL water solution in the pH ranging 2-10 and the temperature of $45-85^{\circ}C$. The observed rate of degradation followed first-order kinetics. The energy of activation for DDB-S degradation was calculated to be 14.1 and 16.5 $Kcal/mole$ at pH 5 and in distilled watery respectively. The degradation rate constant ($K_{25^{\circ}C}$) obtained by trending line analysis of Arrhenius plots for DDB-S was $5.3{\times}10^{-6}h^{-1}$. The times to degrade 10% ($t_{10}$) and 50% $t_{500}$) at $K_{25^{\circ}C}$ were 829 and 5,416 days, respectively. DDB-S exhibited the fastest degradation at pH 10 and the slowest rate at pH 5. In addition, at $K_{65^{\circ}C}$, degradation rate constants of DDB-S were 0.066, 0.059, 5.460, 32.171, and $1.4{\times}10^{-6}h^{-1}$ at pH 2, 5, 8, 10 and in distilled water, respectively. These observations indicated that the rate-pH profile of DDB-S showed general acid-base catalysis reaction in the range of pH 2-10.

• Journal of Korean Society on Water Environment
• /
• v.24 no.1
• /
• pp.118-122
• /
• 2008

Degradations of phenol and chlorinated compounds mixtures were studied with ultrasound of 20 kHz and 0.57, 1.14 W/mL. In presence of carbon tetrachloride (CT), degradation rate of phenol is faster than chloroform (CF), dichloromethane (DCM) and phenol solution. It is due to that CT generates of free chlorine (HOCl and $OCl^-$) from the sonochemical degradation and plays a role of hydrogen atom scavenger. CF and DCM are react with free chlorine, so amount of free chlorine is smaller than CT solution. The degradation rates of chlorinated compounds decreased with co-presence of phenol in the solution due to the distribution ultrasonic energy to both compounds. The measured chloride ion was lower than the theoretical concentration assuming complete degradation. This means not all the contaminants destructed went through complete degradation.

• Journal of Pharmaceutical Investigation
• /
• v.29 no.3
• /
• pp.205-210
• /
• 1999

To formulate the parenteral delivery of a new cephalosporin derivative, 7-${\beta}$-[(2)-2-(2-arninothiazol-4-yl)-2methoxyiminoacetamido]- 3- [(2,3-cyclopenteno-4-carbamoyl-l-pyridinium)methyl]- 3-cephem-4-carboxylate sulfate( CKD604), the stability and solubility of CKD-604 in various aqueous media were investigated. The degradation kinetics of CKD-604 in aqueous solutions (ionic strength 0.1, pH 1-8) were studied at $37^{\circ}C$. The observed degradation rates followed pseudo first order kinetics. The pH-rate profile exhibited a minimum degradation rate at pH 5. The Arrhenius activation energy was 14.2 kcal/mol in pH 5 buffer solution. Excellent agreement between the cephalosporins' theoretical pH-rate profile and the experimental data indicated that the degradation pathway of CKD-604 could be predicted according to the general pathway of cephalosporins. The solubility of CKD-604 was 8.16 mg/ml at $25^{\circ}C$. To enhance the solubility and adjust the suitable pH, CKD-604 was solubilized by using sodium ascorbate, ascorbic acid and urea. The compositions were obtained to satisfy optimum pH and concentration, and the total amount of additives was several times of the active ingredient, CKD-604.

• Korean Journal of Food Science and Technology
• /
• v.23 no.3
• /
• pp.355-359
• /
• 1991

Effects of temperature and pH on thermal degradation of monosodium glutamate(MSG) were investigated during heating of 2% MSG solution at $100{\sim}200^{\circ}C\;and\;pH\;4{\sim}9$. The results showed that the degradation of MSG was very significantly affected by heating temperature and pH. Three hours of heating at $pH\;4\;and\;120^{\circ}C$ resulted appr. 73% MSG degradation while 3 hours at $100^{\circ}C$ decreased only 12%. The comparison study of initial rate of MSG degradation and degradation rate constants showed the highest degradation rate and rate constant and low values in the range of $pH\;6{\sim}8{\sim}$. The values of activation energy calculated from linear relationship of rate constants and 1/T were 18.3 and 9.2 kcal/mole for pH 4 and 5, respectively.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.8 no.5 s.39
• /
• pp.45-54
• /
• 2004

Since existing hysteretic models for R/C members focused on presenting the degrading stiffness using empirical equations based on experiments, they cannot accurately predict the energy dissipation capacity during cyclic loading. Recently, design equations which can evaluate the energy dissipation capacity of R/C members were developed. Based on those equations, in the present study, an energy-based hysteretic model for flexure-dominated R/C members was developed. The proposed model was devised to dissipate the same energy as the actual one dissipated during a complete load cycle. The proposed model represents the hysteretic behaviors of R/C members accompanied by stiffness degradation and pinching using primary and cyclic curves and six unloading/reloading rules. The proposed model was verified by comparisons with various experimental results. The energy-based hysteretic model can be used to develop computer programs for static and dynamic analysis/design because it is simple and easily applicable to numerical analysis.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2661-2665
• /
• 2011

In order to evaluate the structural integrity of a GFRP composite bogie frame due to flying railway ballast, the low velocity impact test and compressive test after impact was conducted for glass fiber/epoxy 4-harness satin woven laminate composites applied to skin part of a bogie frame. The impact test was performed using a instrumented impact testing system with energy levels of 5J, 10J and 20J and the designed impactor based on typical railway ballast shapes such as sphere, cube and cone to simulate the ballasted track environments. The compressive strength was tested to according to ASTM D7137 to evaluate the degradation of mechanical property of impact damaged laminate composites. The results showed that the damage area and the degradation of compressive strength after impact for laminate composites was increased with increase in impact energy for all ballast shapes and was particularly most influenced by cone ballast shape.

• Transactions of the Korean hydrogen and new energy society
• /
• v.2 no.1
• /
• pp.69-75
• /
• 1990

The effect of thermal cycling on the hydrogenation characteristics of the $Mg_2Cu-H$ system was investigated in order to study of intrinsic degradation of the system. The hydrogen storage capacity decreased with thermal cycling from $573^{\circ}K$ to $663^{\circ}K$. By the thermal analysis it is found that stable $MgH_2$ hydride is formed during thermal cycling. With a heat treatment at $693^{\circ}K$ at a hydrogen pressure of 16 atm, the hydrogenation rate drastically decreased. From these observation, it suggested that the intrinsic degradation of $Mg_2Cu$ system results from mainly the formation of stable $MgH_2$ hydride phase.