• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2008.05a
• /
• pp.47-70
• /
• 2008

Cost efficiency is today the primary requirement in the paper and board industry. This has led therefore, to a greater preponderance of products with specifically designed functionality to take account of current industry needs. Continually increasing machine coating speeds together with these new coating colour components have put more emphasis on the importance of the correct rheology and water retention of the coating colours to achieve good runnability and end product quality. In the coating process, some penetration of the aqueous phase, to the base paper or board must occur to anchor the pre-coating to the base or the topcoat to the pre-coat. The aqueous phase acts as a vehicle not only for the binder, but also for the other components. If this water or material penetration is not controlled, there will be excessive material shift from the coating colour to the base, before immobilization of the coating colour will stop this migration. This can result in poor machine runnability, unstable system and uneven coating layer, impacting print quality. The performance of rheology modifiers or thickeners on the coating color have tended to be evaluated by the term, "water retention". This simple term is not sufficient to explain their performance changes during coating. In this paper we are introducing a new concept of "material retention", which takes note of the total composition of the coating colour material and therefore goes beyond the concept of only water retention. Controlled material retention leads to a more uniform z-directional distribution of coating colour components. The changes that can be made to z-directional uniformity will have positive effects on print quality as measured by surface strength, ink setting properties, print gloss, mottling tendency. Optical properties, such as light scattering, whiteness and light fastness delivery should also be improved. Additionally, controlled material retention minimizes changes to the coating colour with time in re-circulation giving less fluctuation in quality in the machine direction since it more closely resembles fresh coating for longer periods. Use of the material retention concept enables paper and board producers to have more stable runnability (i.e. lower process costs), improved end product quality (i.e. better performance of used chemicals) and/or optimized use of coating colour components (i.e. lower total formulation cost)

• Proceedings of the SCSK Conference
• /
• 2003.09b
• /
• pp.524-526
• /
• 2003

Lipsticks are cosmetics which do not contain water and are usually preserved with parabens. When submitted to the Challenge Test, theses products did not reach the CTFA criteria, which means that microbiological contamination could occur before the end of its shelf life. The aim of this study was to evaluate the contamination level of 130 lipsticks after its use. Microorganisms were isolated from 14,6 % of the samples. However, only in two samples (1,5%) the contamination level exceeded the 100 CFU/g level, which means that, although the preservative system was not efficient to eliminate bacteria, the lack of free water was enough to prevent the microbial development. Total bacteria and fungi were determined by conventional methodology, according to CTFA Microbiological Guidelines. The microbes were then isolated and characterized as normal skin flora microorganisms. This suggest that products were contaminated by the constant application of lipsticks by consumers. This could lead to cross contamination when the same product is shared by several people. Extra care should be taken into account when this type of products are available to be tested by several consumers in demonstration displays.

• The Journal of the Korea Contents Association
• /
• v.21 no.10
• /
• pp.204-216
• /
• 2021

This study empirically analyzed factors affecting consumers' intention to use metaverse by applying the extended technology acceptance model. In other words, the factors affecting the intention to use the metaverse were set as content quality, perceived enjoyment, social influence, self-efficacy, and investigated from the perspective of the expanded technology acceptance model. For this end, a survey was conducted on 296 university students in Seoul, and the collected data from 267 students were analyzed using SPSS 25.0 and AMOS 23.0. As a result, it was found that perceived usefulness and perceived ease of use, which are the antecedent variables of the extended technology acceptance model, affect the intention to use the metaverse, and perceived ease of use has an effect on perceived usefulness. Content quality and perceived enjoyment had an effect on perceived usefulness, perceived ease of use and intention to use metaverse. Social influence was found to affect perceived usefulness and intention to use metaverse. Also, self-efficacy was found to affect perceived ease of use and intention to use metaverse.

• Korean Journal of Computational Design and Engineering
• /
• v.8 no.3
• /
• pp.167-174
• /
• 2003

The outsole mold of the shoes has been manufactured using electro-discharge machining by graphite electrode or using casting etc. The study is concerned with the measurement of the mold of the shoes in use, the modeling by CAD/CAM system, the generation of NC data and the machining by CNC machining center. The machining has been performed from the data type obtained from 3-dimensional measurement points of mold in use. The ball end mill and the engraving cutter is used as cutter and the cutting conditions are adjusted according to the shapes and sizes of the cutter and part in cutting. The method has proposed the possibility for higher productivity and quality on mold-manufacturing of shoes outsole.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.18 no.1
• /
• pp.1-7
• /
• 2009

Quality of seed in the mulberry silkworm, Bombyx mori (L.) is determined by many important factors, wherein unfertilized eggs play an important role. Unfertilization of eggs are caused by several reasons such as, abnormality in the sexual organs of the male and female, abnormal development of the micropylar end of the egg, unfavorable environmental conditions during spinning, cocoon preservation, imperfect handling of moths, mating, ovipostion, cold storing of pupae / moths and indiscriminate use of male moths etc. Though the presence of unfertilized eggs would in no way affect the fertilized ones and their quality directly, the frequency of their occurrence underrates the quality and brings down the hatching percentage. Lower the occurrence of unfertilized eggs, higher is the rating of seed quality. Of the various intrinsic and extrinsic factors and events involved in egg deposition of an adult silk moth, mating is an instinct and a biological obligation for the ultimate perpetuation of the species and a must to provide stimulus for oogenesis and bring about biochemical changes in the spermatophore of the silkworm in order to ensure the presence of sufficient number of normal sperms and testicular fluid in the female reproductive organ, activating ovulation and accelerating oviposition behavior and egg deposition. An attempt has been made in this article to briefly elucidate the characteristics of unfertilized eggs, causes of their occurrence and its impact as well as the significance in silkworm seed production.

• Journal of the Korean Wood Science and Technology
• /
• v.2 no.1
• /
• pp.3-18
• /
• 1974

The exports of plywood are increasing annually and it has ranked first in the world market because of the high quality product and manufactured using mordern techniques. However, it is known that the exports of the other wood products, except plywood, is inactive because of their low quality. Accordingly, to increase the exports of various wood products investigations were carried out on kiln drying techniques to improve the quality of the wood. Wet wood should be kiln dried before use to prevent various drying defects such as distortion, shrinkage etc., which would develop after processing,:and also wet wood is not suitable for cutting, gluing and finishing. Therefore, the kiln drying properties of lumber from such species as oak, ramin and meranti which are used in large quantity for manufacturing exporting wood products have been studied. The results of the research are summarized as follows. (1) The end checks and the time for drying from initial moisture content of about 40 percent to 5 percent moisture content in ovendry were investigated as follows: (2) The kiln dried results, for 30mm stock, which are presented by using kiln schedule table 3 are as follows: (3) The kiln schedules for ramin, meranti and oak are given respectively as follows: Ramin kiln schedule: Table 17 and Table 18. Meranti schedule : Table 12. Oak schedule : Table 15.

• Journal of Korean Library and Information Science Society
• /
• v.45 no.3
• /
• pp.415-440
• /
• 2014

This study intends to make a comprehensive inquiry into the meaning and limitations of Discovery, and to explore how to make full use of Discovery in library cataloging. To this end, first discussed is the meaning of Discovery, which has a variety definitions. For the quality evaluation, 5 criteria were developed on the basis of literature review. Then this study conducted the quality evaluation on the basis of previously developed 5 criteria and usefulness of Discovery in library catalogs is thoroughly discussed. Based on these, the final discussion includes strategies for Korean LIS scholars and library practitioners to consider when applying Discovery as an integrated search tool.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.49 no.9
• /
• pp.425-432
• /
• 2000

Wavelet transform is a new method fro electric power quality analysis. Several types of mother wavelets are compared using voltage sag data. Investigations on the use of some mother wavelets, namely Daubechies, Symlets, Coiflets, Biorthogonal, are carried out. On the basis of extensive investigations, optimal mother wavelets for the detection of voltage sag are chosen. The recommended mother wavelet is 'Daubechies 4(db4)' wavelet. 'db4', the most commonly applied mother wavelet in the power quality analysis, can be used most properly in disturbance phenomena which occurs rapidly for a short time. This paper presents a discrete wavelet transform approach for determining the beginning time and end time of voltage sags. The technique is based on utilising the maximum value of d1(at scale 1) coefficients in multiresolution analysis(MRA) based on the discrete wavelet transform. The procedure is fully described, and the results are compared with other methods for determining voltage sag duration, such as the RMS voltage and STFT(Short-Time Fourier Transform) methods. As a result, the voltage sag detection using wavelet transform appears to be a reliable method for detecting and measuring voltage sags in power quality disturbance analysis.

• Biomedical Engineering Letters
• /
• v.8 no.4
• /
• pp.355-364
• /
• 2018

When focusing using an ultrasonic transducer array, a main lobe is formed in the focal region of an ultrasound field, but side lobes also arise around the focal region due to the leakage. Since the side lobes cannot be completely eliminated in the focusing process, they are responsible for subsequent ultrasound image quality degradation. To improve ultrasound image quality, a signal processing strategy to reduce side lobes is definitely in demand. To this end, quantitative determination of main and side lobes is necessary. We propose a theoretically and actually error-free method of exactly discriminating and separately computing the main lobe and side lobe parts in ultrasound image by computer simulation. We refer to images constructed using the main and side lobe signals as the main and side lobe images, respectively. Since the main and side lobe images exactly represent their main and side lobe components, respectively, they can be used to evaluate ultrasound image quality. Defining the average brightness of the main and side lobe images, the conventional to side lobe image ratio, and the main to side lobe image ratio as image quality metrics, we can evaluate image characteristics in speckle images. The proposed method is also applied in assessing the performance of side lobe suppression filtering. We show that the proposed method may greatly aid in the evaluation of medical ultrasonic images using computer simulations, albeit lacking the use of actual experimental data.

• Research in Community and Public Health Nursing
• /
• v.33 no.1
• /
• pp.114-127
• /
• 2022

Purpose: This study aimed to develop a self-management mobile app for adults with osteoarthritis based on a self-determination theory to use it as a nursing intervention tool, and to evaluate the effects of the developed mobile app on adults' basic psychological needs, indexes of osteoarthritis, self-management and quality of life. Methods: The 56 participants were randomly assigned to either the experimental group (n=28) or the control group (n=28). The participants of the experimental group used a self-management mobile app for 12 weeks after the pretest, and two posttests were taken at the end of every 6 weeks. The data were analyzed using IBM SPSS/WIN 25.0 for Chi-square test, Fisher's exact test, independent t-test, and repeated measures ANOVA. Results: Basic psychological needs, indexes of osteoarthritis, self-management, and quality of life score of the experimental group were significantly higher than those of the control group. Conclusion: Our findings suggest that mobile app intervention can support improvements in psychological needs, symptoms of osteoarthritis and quality of life in adults with osteoarthritis. It is recommended that the developed mobile app be used as a nursing intervention tool for adults with osteoarthritis in the community.