• Journal of the Korean Institute of Landscape Architecture
• /
• v.50 no.4
• /
• pp.63-76
• /
• 2022

This study was conducted to compare the perceptions of the park use status, importance, and satisfaction of users in the first implemented and completed Uijeongbu Jikdong Neighborhood Park among the private park special projects carried out as a countermeasure for long-term non-execution of urban parks. To this end, in the initiated project, apartment residents and non-residents were classified according to the promotion plan, and a questionnaire research on importance and satisfaction was conducted to analyze the park use status and IPA(importance-performance analysis). First, as a result of the analysis of the current situation in terms of locational characteristics that occur during the promotion of special projects for private parks, unlike the mountainous areas, the targeted site was close to flat land, indicating that users' satisfaction with the landscape was high. Second, the access of the apartment residents in the initiated project site was easy. Thus, the use rate of residents was relatively higher than that of the non-residents. Third, differences in perception by item were identified through the analysis of IPA and the establishment of strategies. In quadrant I, among the facilities and services, installing restrooms was the priority for residents, and parking facilities and rest facilities were the priority than installing restrooms for non-residents. In quadrant II, overall scores for residents and non-residents were similar, but the distance to the park was in quadrant III due to the low level of satisfaction among non-residents. In this study, the difference in perception between residents and non-residents may cause problems in access and facilities in managing the park in the future. Therefore, it would be necessary to find a way to improve it by establishing a management strategy that takes into account the difference in the perception of residents after construction. In addition, through the results of this study, it was judged that the purpose of park development, the selection of types of parks, and the selection of plans and management indicators for each kind would be significant in the promotion of initiated projects in the planning of park development.

• Journal of Animal Science and Technology
• /
• v.49 no.6
• /
• pp.761-772
• /
• 2007

This study was conducted to evaluate effects of dietary pine cone meal on growth performance, blood characteristics, carcass quality and fecal noxious gases compounds in finishing pigs. The total of sixty [(Landrace×Yorkshire)×Duroc] pigs(86.01±0.25kg in average initial body weight) were used in 35 days assay. Dietary treatments included 1) T1(2% cottonwood sawdust), 2) T2(1% cottonwood sawdust+1% pine cone meal) and 3) T3(2% pine cone meal). There were three dietary treatments with five replicate pens per treatment and four pigs per pen. During the overall periods, there were no significant differences in ADG(Average daily gain), ADFI(Average daily feed intake) and gain/feed ratio among treatments (P>0.05). Also, Nutrient digestibilities and blood characteristics were not affected by dietary treatments. At the end of this experiment, a*-value of logissimus dorsi muscle color and sensory evaluation color were higher in T3 treatment than T1 treatment(P<0.05). In fatty acid contents of lean, C18:1 and total MUFA were significantly lower in T1 treatment than other treatments(P<0.05). However, total ω6 and total PUFA were higher in T1 treatment than T2 treatment(P<0.05). In fatty acid contents of fats, total SFA was significantly higher in T2 treatment than T3 treatment(P<0.05). C18:1 was higher in T2 treatment than T1 treatment(P<0.05). There were no significant differences in fecal noxious gas compounds among the treatments. In conclusion, the results of the experiment was affected by dietary supplementation of pine cone meal on meat color and fatty acid composition of pork in finishing pigs.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.2
• /
• pp.23-32
• /
• 2020

The compression sensing technology, CAFB, was developed to obtain the raw signal of the target structure by compressing it into a signal of the intended frequency range. At this point, for compression sensing, the CAFB can be optimized for various reference signals depending on the desired frequency range of the target structure. In addition, optimized CAFB should be able to efficiently compress the effective structural answers of the target structure even in sudden/dangerous conditions such as earthquakes. In this paper, the targeted frequency range for efficient structural integrity monitoring of relatively flexible structures was set below 10Hz, and the optimization method of CAFB for this purpose and the seismic response performance of CAFB in seismic conditions were evaluated experimentally. To this end, in this paper, CAFB was first optimized using Kobe seismic waveform, and embedded it in its own wireless IDAQ system. In addition, seismic response tests were conducted on two span bridges using Kobe seismic waveform. Finally, using an IDAQ system with built-in CAFB, the seismic response of the two-span bridge was wirelessly obtained, and the compression signal obtained was cross-referenced with the raw signal. From the results of the experiment, the compression signal showed excellent response performance and data compression effects in relation to the raw signal, and CAFB was able to effectively compress and sensitize the effective structural response of the structure even in seismic situations. Finally, in this paper, the optimization method of CAFB was presented to suit the intended frequency range (less than 10Hz), and CAFB proved to be an economical and efficient data compression sensing technology for instrumentation-monitoring of seismic conditions.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.1
• /
• pp.73-80
• /
• 2022

In this study, details of NRC beam-column connections were developed in which beam and columns pre-assembled in factories using steel angles were bolted on site. The developed joint details are NRC-J type and NRC-JD type. NRC-J type is a method of tensile joining with TS bolts to the side and lower surfaces of the side plate of the NRC column and the end plate of the NRC beam. NRC-JD type has a rigid joint with high-strength bolts between the NRC beam and the side of the NRC column for shear, and with lap splices of reinforcing bar penetrating the joint and the beam main reinforcement for bending. For the seismic performance evaluation of the joint, three specimens were tested: an NRC-J specimen and NRC-JD specimen with NRC beam-column joint details, and an RC-J specimen with RC beam-column joint detail. As a result of the repeated lateral load test, the final failure mode of all specimens was the bending fracture of the beam at the beam-column interface. Compared to the RC-J specimen, the maximum strength of the specimen by the positive force was 10.1% and 29.6% higher in the NRC-J specimen and the NRC-JD specimen, respectively. Both NRC joint details were evaluated to secure ductility of 0.03 rad or more, the minimum total inter-story displacement angle required for the composite intermediate moment frame according to the KDS standard (KDS 41 31 00). At the slope by relative storey displacemet of 5.7%, the NRC-J specimen and the NRC-JD specimen had about 34.8% and 61.1% greater cumulative energy dissipation capacity than the RC specimen. The experimental strength of the NRC beam-column connection was evaluated to be 30% to 53% greater than the theoretical strength according to the KDS standard formula, and the standard formula evaluated the joint performance as a safety side.

• (The) Research of the performance art and culture
• /
• no.43
• /
• pp.325-356
• /
• 2021

This study is to analyze the current status of transmission and musical characteristics of Naeseo-deulilsori in Changwon, and the purpose of this study is to illuminate the value of deulilsori in Naeseo region, so that it can be continuously inherited. Naeseo-deulsori consists of the Mosimgi-sori, Nonmaegi-sori, and Chingchingi-sori. Mosimgi-sori, which is called when planting a seedling, is divided into 6 types according to the order and situation of work. ① rice planting sound, ② rice planting sound called in the morning, ③ rice planting sound called at lunch time, ④ rice planting sound called after lunch, ⑤ rice planting sound called when it is raining or cloudy, ⑥ rice planting sound called at sunset. Mosimgi-sori, which is called when planting a seedling, is based on Menali-tori, but partly influenced by Yugjabaegi-tori. However, it was typical Menali-tori in the slow The sound of rice planting in the nearby Haman region, but as the speed increased in the fast The sound of rice planting, the characteristics of Menali-tori faded and la↘mi perfect fourth descending frequently appeared. In the sound of rice planting in Goseong, both slow and fast sounds were strongly influenced by Yugjabaegi-tori. In the end, the sound of rice planting in the Naeseo region is less Yugjabaegi-tori than in the Goseong region and stronger than in Haman region. This combination of tori is a musical bargaining phenomenon that appears in the border region, and it can be said to be a geographical and regional characteristic of the Naeseo region. Nonmaegi-sori has the same sound as 'Sangsadeio' throughout the nearby Goseong and Haman regions. However, in Nonmaegi-sori in the Naeseo region, a strong Gyeong-tori tendency is found in the sound received. Looking at the flow of the melody of Nonmaegi-sori, it seems that the pitch has been changed by the intestines in recent years, and this modified melodic form has continued as it is. In order to guarantee locality, this part seems to need to be corrected in the future.

• Korean Journal of Poultry Science
• /
• v.28 no.2
• /
• pp.91-98
• /
• 2001

Three experiments were conducted to investigate the Pine Bark Spent Liquor (PBSL) inclusion, prepared by alkaline sulfite-anthraquinone cooking, on Pellet durability index (PDI) of practical diets and performance of broiler chicks and laying hens. Fourteen treatments with four replications were assigned for PDI test in Experiment 1. Control, 10% Wheat(W10), 20% Wheat(W20), 0.25, 0.50, 1.00, 2.00 and 3.00% PBSL, 0.1, 0.2% commercial pellet binder A(CPB A) or B(CPB B), W10 plus 0.1% CPB A or B were used for PDI test. PDI was measured by PDI tester (Oriental Motors, Japan). The control diet was based on corn and soybean meal with no wheat or pellet binders inclusion. The PDI of the PBSL or other commercial pellet binder treatments were significantly higher than control groups(P<0.05). It was shown 95.9, 95.9, 95.8, and 95.7 in W10, 0.5% PBSL, 0.2% CPB A or B treatments, respectively. Thus, those treatments were applied to Experiments 2 and 3. In experiment 2, 200 male broiler chicks (Cobb$\times$Cobb) were allocated to the control, W10, PBSL 0.5%, 0.2% CPB A and B with four replications. Starter diets contained 3,169, 3,149 kcal/kg ME and 21% CP, and finisher diets were fed at the level of 3,192, 3,172 kcal/kg ME and 19W% CP. Weight gain, feed intake, feed conversion ratio (FCR) were weekly measured for 5 wk and the number of intestinal anaerobes were examined at the end of experiment. The weight gain of chicks fed PBSL was not significantly greater than control groups, but was significant different compared to that of W10 or 0.2% CPB A treatments (P<0.05). FCR of chicks treated with PBSL or other pellet binders tended to improve compared to that of control.

• (The) Research of the performance art and culture
• /
• no.34
• /
• pp.133-172
• /
• 2017

Mansuseongjeol was originally a term that referred to the birthday of Chinese emperors. In October 1897, when Emperor Gojong ascended the throne, his birthday could be called mansuseongjeol. The celebratory events for mansuseongjeol took place throughout various levels of society and regions. Various places and classes including government officials, foreigners, students, religious people, journalists, merchants, civic groups, and nation-wide open ports celebrated the birth of Emperor Gojong, and the classes celebrating the day became stronger and wider. In other words, in the sense that the celebration had the nature of being universal, national, and global in terms of classes, regions, and races, the event was distinguished. Due to such nature, celebrating culture proceeded in various ways and the imperial family provided donation. Celebration on mansuseongjeol extended to respect toward the emperor and patriotism so it contributed to strengthening the emperor's power and solidifying the unity of the people. Also, such an event was reported around the world through diplomats and reporters living in Korea, raising the national status of Korea in the world. However, after the breakout of Russo-Japanese War, Japan controlled the finance of the royal family, reduced the power of the emperor, and the celebration of mansuseongjeol was also reduced. Due to the suspension of royal family's financial support, crackdown from Japan, and the dethronement of Emperor Gojong, events for mansuseongjeol disappeared and only inside the palace, did formal celebrations continue centering on pro-Japan officials and Japanese people. The abdication of Emperor Gojong came with the collapse of Korean Empire and along with that, celebration of mansuseongjeol came to an end. In the circumstances, the culture of court banquet disintegrated, and the best performers of Korean Empire degenerated into mere entertainers. Though mansuseongjeol, the medium of expressing respect toward the emperor and patriotism, lost its status, it is significant that the cultural achievements, which were created during the process established with the support of the financial power of the royal family, serve as internal power that drove Korea's modern and contemporary cultural history.

• Archives of design research
• /
• v.17 no.2
• /
• pp.77-86
• /
• 2004

User-Centered Design Approach plays important role in dealing with usability issues for developing modern technology products. Yet it is still questionable whether the User-Centered approach is enough for the development of successful consumer contents since the User-Centered Design is originated from the software engineering field where meeting customers' functional requirement is the most critical aspect in developing a software. However, modern consumer market is already saturated and in order to meet ever increasing consumer requirements, the User-Centered Design approach needs to be expanded. As a way of incorporating the User-Centered Approach into the consumer product development, Jordan suggested the 'Pleasure-based Approach' in industrial design field, which usually generates multi-dimensional user requirements: 1)physical, 2)cognitive, 3)identity and 4) social. It is the current tendency that many portal and community service providers focus on fulfilling both functional and emotional needs for users when developing new items, contents and services. Previously fulfilling consumers' emotional needs solely depend on visual designer's graphical sense and capability. However, taking the customer-centered approach on withdrawing consumers' unknown needs is getting critical in the competitive market environment. This paper reviews different types of user research techniques and categorized into 6 ways based on Kano(1992)'s product quality model. Based on his theory, only performance factors, such as suability, can be identified through the user-centered design approach. The user-centered design approach has to be expanded to include factors include personality, sociability, pleasure, and so on. In order to identify performance as well as excellent factors through user research, a user-research framework was established and tested through the case study, which is ' the development of new online service for teens '. The results of the user research were summarized at the end of the paper and the pros and cons of each research techniques were analyzed.

• Proceedings of the Korea Society of Poultry Science Conference
• /
• 2001.11a
• /
• pp.89-91
• /
• 2001

Two experiments were conducted to compare the dietary supplemental influence of conjugated linoleic acid(CLA), soybean oil(SBO) and commercial tallow(U) on performance and physiological related factor of broiler chicks. Diets contained CP 21.5, 19% and ME 3,100, 3,100kcal/kg for starting and finishing period. Each three levels(1.0, 2.0, 3.0%) of CLA, SBO, CT were supplemented to basal diets. Five hundred forty and three hundred sixty chicks were applied to 3${\times}$3, 2${\times}$3 factorial design with four replicates in Expt 1 and 2. Weight gain, food intake and feed conversion were weekly examined. Blood cholesterol, ND antibody titer, blood components and were measured at the end of experiment. Metabolizable energy(ME) were measured through the metabolic feeding trial in each oil. ME was 8,542, 9,179, 8,133 kcal/kg in CLA, SBO and CT, respectively. In Expt 1, weight gain of chicks fed 1% dietary oil was significantly lower than other treatments(P<0.05). Feed conversion was significantly improved in SBO supplemental groups of all treatments(P<0.05). In Expt 2, CLA supplements increased weight gain significantly for finishing period(P<0.05) compared to that of other treatments. Feed conversion of chicks fed 2% dietary oil was significantly improved relative that of 3%(P<0.05). HDL of 3% dietary supplemental oil treatments was significantly higher for finishing and starting period in Expt 1 and 2, respectively than other treatments(P<0.05). There were no significantly different M Antibody titer in Expt 1, but showed significance between dietary supplemental oil in Expt 2(P<0.05). CLA content of breast meat was 12.23, 18.74, 25.67 mg/g in 1, 2, and 3% CLA treatments and significantly different between them(P<0.05). As the results of these experiments, feeding CLA tended to improve the weight gain compared In that of other dietary oil, but was not increase the ND antibody titer of broiler chciks. CLA content of breast meat also showed the significance at different level of dietary supplement.

• Journal of Radiation Protection and Research
• /
• v.40 no.1
• /
• pp.1-9
• /
• 2015

Compton cameras overcome several limitations of conventional mechanical collimation based gamma imaging devices, such as pin-hole imaging devices, due to its electronic collimation based on coincidence logic. Especially large-scale Compton camera has wide field of view and high imaging sensitivity. Those merits suggest that a large-scale Compton camera might be applicable to monitoring nuclear materials in large facilities without necessity of portability. To that end, our research group have made an effort to design a large-scale Compton camera for safeguard application. Energy resolution or position resolution of large-area detectors vary with configuration style of the detectors. Those performances directly affect the image quality of the large-scale Compton camera. In the present study, a series of Geant4 Monte Carlo simulations were performed in order to examine the effect of those detector parameters. Performance of the designed large-scale Compton camera was also estimated for various monitoring condition with realistic modeling. The conclusion of the present study indicates that the energy resolution of the component detector is the limiting factor of imaging resolution rather than the position resolution. Also, the designed large-scale Compton camera provides the 16.3 cm image resolution in full width at half maximum (angular resolution: $9.26^{\circ}$) for the depleted uranium source considered in this study located at the 1 m from the system when the component detectors have 10% energy resolution and 7 mm position resolution.