• Journal of Communications and Networks
• /
• v.17 no.5
• /
• pp.534-540
• /
• 2015

In this paper we propose an analytical model for jitter, wherein we implement the interrupted Poisson process (IPP) for incoming traffic. First, we obtain an analytical model for the jitter on one node with respect to the phase probabilities, traffic load, and tagged traffic share in the aggregate traffic flow. Then, we analyze N-node cases, and propose a model for end-to-end jitter. Our analysis leads to some fast-to-compute approximations that can be used for future network design or admission control. Finally, we validate our analytical results by comparing them with previous results for limit cases, as well as with event-driven simulations. We propose the use of our results as guidelines for jitter evaluation of real IP traffic.

• International Journal of Control, Automation, and Systems
• /
• v.6 no.4
• /
• pp.526-533
• /
• 2008

We propose a wavelet neural network (WNN) control method for active queue management (AQM) in an end-to-end TCP network, which is trained by adaptive learning rates (ALRs). In the TCP network, AQM is important to regulate the queue length by passing or dropping the packets at the intermediate routers. RED, PI, and PID algorithms have been used for AQM. But these algorithms show weaknesses in the detection and control of congestion under dynamically changing network situations. In our method, the WNN controller using ALRs is designed to overcome these problems. It adaptively controls the dropping probability of the packets and is trained by gradient-descent algorithm. We apply Lyapunov theorem to verify the stability of the WNN controller using ALRs. Simulations are carried out to demonstrate the effectiveness of the proposed method.

• The Journal of Information Systems
• /
• v.23 no.1
• /
• pp.93-109
• /
• 2014

This study aims to develop a rich understanding of user goals in user-empowering information technologies which have been dominating part in the information systems environment. A particular focus is on users' goals in a social network site (SNS) which is a typical example of user-empowering technologies. Users conduct various activities in order to achieve diverse goals in SNS. Thus, investigating what goals users pursue in SNS will give insights into understanding the users. We employed the laddering interview technique and means-end chain approach. Interviews of 50 Facebook users were analyzed to produce a hierarchical goal map showing users' goal structure. The map contains 18 goals, including self-reflection, psychological stability, belongingness, improving productivity, and amusement as ultimate goals in SNS. In the map, there are varied routes from activities to ultimate goals in SNS; that is, a complex assembly consisting of activities and goals. The findings call the information systems research community to have more interests in diverse goals and values users seek with technologies.

• Analytical Science and Technology
• /
• v.35 no.1
• /
• pp.8-14
• /
• 2022

Many studies have shown that advanced glycation end-products (AGEs) and glycation adducts are significantly linked to aging and disease. Particularly, the level of glycation in human milk is important because the AGE intake is closely related to AGE levels in infants. In this study, we used human milk samples obtained from four primiparae and four multiparae. We isolated proteins using acetone and trichloroacetic acid (TCA) precipitation. A total of 67 glycated proteins and 122 glycated peptides was quantified; among them, 19 glycated peptides were differentially expressed. We confirmed that the degree of glycation differed according to fertility. The study provides a foundation for using proteomics to evaluate the mother's milk quality and link between maternal health and human milk quality.

• Journal of Advanced Navigation Technology
• /
• v.15 no.1
• /
• pp.54-60
• /
• 2011

The development of wireless sensor networks (WSN) can be motivated by several types of applications. However, these applications demand an energy-efficient WSN that can prolong the network lifetime and can provide high throughput, low latency and delay. Designing wireless sensor networks with the capability of prolonging network lifetime catch the attention of many researchers in wireless system and network field. Contrasts with Mobile Ad Hoc Network system, Wireless Sensor Networks designs focused more on survivability of each node in the network instead of maximizing data throughput or minimizing end-to-end delay. In this paper, we will study part of data link layer in Open Systems Interconnection (OSI) model, called medium access control (MAC) layer. Since the MAC development of energy aware MAC Protocol for wireless sensor layer controls the physical radio part, it has a large impact on the overall energy consumption and the lifetime of a node. This paper proposes a analytical approach that tries to reduce idle energy consumption, and shows the increasement of network end-to-end arrival rate due to efficiency in energy consumption from time slot management.

• BioChip Journal
• /
• v.12 no.4
• /
• pp.332-339
• /
• 2018

The future neuro-prosthetic devices would be required spikes data monitoring through sub-nanoscale transistors that enables to neuroscientists and clinicals for scalable, wireless and implantable applications. This research investigates the spikes monitoring through integrated CNT front-end amplifier for neuro-prosthetic diagnosis. The proposed carbon nanotube-based architecture consists of front-end amplifier (FEA), integrate fire neuron and pseudo resistor technique that observed high electrical performance through neural activity. A pseudo resistor technique ensures large input impedance for integrated FEA by compensating the input leakage current. While carbon nanotube based FEA provides low-voltage operation with directly impacts on the power consumption and also give detector size that demonstrates fidelity of the neural signals. The observed neural activity shows amplitude of spiking in terms of action potential up to $80{\mu}V$ while local field potentials up to 40 mV by using proposed architecture. This fully integrated architecture is implemented in Analog cadence virtuoso using design kit of CNT process. The fabricated chip consumes less power consumption of $2{\mu}W$ under the supply voltage of 0.7 V. The experimental and simulated results of the integrated FEA achieves $60G{\Omega}$ of input impedance and input referred noise of $8.5nv/{\sqrt{Hz}}$ over the wide bandwidth. Moreover, measured gain of the amplifier achieves 75 dB midband from range of 1 KHz to 35 KHz. The proposed research provides refreshing neural recording data through nanotube integrated circuit and which could be beneficial for the next generation neuroscientists.

• Journal of Biosystems Engineering
• /
• v.37 no.1
• /
• pp.65-74
• /
• 2012

Purpose: An autonomous robot was developed for harvesting strawberries cultivated in bench-type systems. Methods: The harvest robot consisted of four main components: an autonomous vehicle, a manipulator with four degrees of freedom (DOF), an end effector with two DOFs, and a color computer vision system. Strawberry detection was performed based on 3D image and distance information obtained from a stereo CCD color camera and a laser device, respectively. Results: In this work, a Cartesian type manipulator system was designed, including an intermediate revolute axis and a double driven arm-based joint axis, so that it could generate collision-free motions during harvesting. A DC servomotor-driven end-effector, consisting of a gripper and a cutter, was designed for gripping and cutting the strawberry stem without damaging the strawberry itself. Real-time position tracking algorithms were developed to detect, recognize, trace, and approach strawberries under natural light conditions. Conclusion: The developed robot system could harvest a strawberry within 7 seconds without damage.

• Corrosion Science and Technology
• /
• v.16 no.6
• /
• pp.294-297
• /
• 2017

For the longer service life of steel pile, cathodic protection is selected sometimes at corrosive environment. The cathodic protection design improvement was investigated in this study. The current demand for cathodic protection was calculated from the potentiostatic current monitoring of the steel specimen in the deaerated soil samples. In this study, the current distribution was studied using the Boundary Element Method (BEM) and the Finite Element Method (FEM) numerical analysis methods. The optimum layout of the anode was developed and confirmed by numerical analysis. Under the conventional design of the anode, the length of the anode hole is same as the pile length. We found that, at the bottom end of the pile, the current density is too high. When the anode hole length was 80% of the pile length, the current consumption at the end was reduced. The construction cost of anode hole drilling was decreased about 20%, as compared to the conventional design. Furthermore, the life of the anode materials could be extended by reducing the current consumption at the end section. Using this approach, the construction cost was reduced significantly without any under-protection area on the steel piles.

• Journal of IKEEE
• /
• v.13 no.1
• /
• pp.94-100
• /
• 2009

In recent years, the wireless mesh network (WMN) has been an emerging technology to provide Internet access to fixed and mobile wireless devices. The main goal of this paper is the design and simulation of a new MAC protocol based on the multi-path routing information for wireless mesh networks. The information about multiple paths discovered in the network layer is exploited by the MAC layer in order to forward a frame over the best hop out of multiple hop choices. The performance of our approach is compared with conventional 802.11 MAC through the simulation. The results show that our scheme exhibits a significantly better performance rather than conventional 802.11 MAC protocol in terms of packet overhead, end-to-end throughput and delay.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.1
• /
• pp.163-170
• /
• 2001

In this paper, a massless link model transmitting external forces is developed to achieve the numerical efficiency in simulation of vehicle suspension systems. Forces acting on links are resolved and transmitted to attached points with a quasi-static assumption. Also, a theoretical derivation and computer implementation of a massless link with bushing elements are proposed. In the massless link with bushing elements, one end is connected to the adjacent body with bushings and the other end is connected with a spherical joint. The deformation of a massless link with bushing elements is theoretically determined by minimizing the potential energy function with quasi-static equilibrium assumption at each time step. Several simulations with a full vehicle model are carried out to compare the efficiency of the developed massless link component. From the results, it is concluded that the proposed approach can reduce the computational time considerably.