• Korean Journal of Food Science and Technology
• /
• v.14 no.1
• /
• pp.49-56
• /
• 1982

The effects of measurement conditions on the emulsifying capacity(EC) and emulsion stability(ES) of proteins were studied in order to develop laboratory standard methods for the evaluation of emulsifying properties. The EC of proteins decreased with the increments of protein concentration and mixing rate. It increased with the increasing oil addition rate up to 0.8 ml/sec, but did not change at $0.8{\sim}1.2\;ml/sec$. The addition of sodiumchloride enhanced EC of proteins, attaining to the highest EC at 0.3M NaCl for Pro-Fam and 0.1M NaCl for Na-caseinate. The ES of Pro-Fam was higher than that of caseinate. The ES was increased by the increments of protein concentration, oil addition volume, mixing rate and mixing time. The EC and ES showed a close relation to the NSI of proteins, reaching to the lowest values of EC and ES at the isoelectric regions of proteins. The laboratory methods for measurements of emulsifying properties of proteins were established. The emulsifying properties of a laboratory-made soybean protein isolate were compared to those of commercial products by using the methods.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.12 no.3
• /
• pp.251-258
• /
• 1983

This experiment was carried out to investigate the capability of production of artificial milk for leaf protein concentrate (LPC). Chloroplastic protein and cytoplasmic protein were extracted from leaves of Dystaenia takeshimana Nakai and LPC was extracted from leaves of Italian ryegrass to increase the functional properties of LPC as a level of milk casein. One gram of chloroplastic protein and cytoplasmic protein and 1g of LPC were succinylated by addition of succinic anhydride 0.1, 0.25, and 1g respectively. Their functional properties were investigated in this experiment. The results obtained were summarized as follows: 1. The non-succinylated LPC showed a higher value in bulk density than the chloroplastic protein, the cytoplasmic protein and LPC succinylated by addition of succinic anhydride 0.1, 0.25, and 1g respectively. Nevertheless, succinylation had an enhancing effect as indicated by the rises as the degrees of succinylation was increased. 2. Although solubility of non-succinylated LPC was lower than that of milk casein, succinylation caused an effective increase in the solubility of the protein and LPC. 3. Water absorption and fat absorption of succinylated LPC were twice to eight times higher than those of milk casein. Fat absorption was not influenced to the extent by succinylation as the water absorption. Excessive succinylation resulted in the decrease of both water absorption and fat absorption. 4. Emulsifying activity and emulsion stability were increased in proportion to the succinylated degree of LPC. More than 10% increase in the amount of succinic anhydride resulted in an apparent increase in emulsifying activity and emulsion stability. Besides, the succinylated LPC showed more excellent functional properties in emulsifying activity and emulsion stability than milk.

• Korean journal of food and cookery science
• /
• v.5 no.1
• /
• pp.9-13
• /
• 1989

The effect of acetic acid concentration on the qualities of mayonnaise was studied. The rheological properties, emulsifying stability and color of the mayonnaise were determined by rotary viscometer, rotary shaker and centrifuge, and color and color difference meter, respectively. The rheological behavior of mayonnaise showed plastic behavior with yield stress and that of shear thinning. The yield stress and consistency index increased as the acetic acid concentration increased. The emulsion stability was lowest at 4% acetic acid concentration and highest at 1% acetic acid concentration. With the increase of the acetic acid concentration, lightness increased and yellowness decreased.

• Food Science of Animal Resources
• /
• v.31 no.5
• /
• pp.727-730
• /
• 2011

The effects of various NaCl levels (0, 0.3, and 0.6 M) and pH values (pH 5.0, 5.5, 6.0, and 6.5) on the emulsifying and gelling properties of pork myofibrillar protein (MP) were assessed. The emulsion stability index (ESI), emulsifying activity index (EAI), and creaming index were measured at a 1:20 ratio of MP to corn oil. The EAI and ESI of pork MP showed maximum values at pHs 6.0 and 6.5 and at 0.3 M NaCl, resulting in better emulsion properties. Additionally, the cooking yield (CY) and gel strength (GS) of emulsified MP gel were measured at an MP: corn oil ratio of 1: 2; GS increased with increasing levels of salt. At 0.6 M NaCl, GS decreased with decreasing pH from 5.5 to 6.5. GS and gelling properties were optimal at pH 5.5 in 0.6 M salt. The highest CY was observed at 0.6 M NaCl, regardless of the pH value. However, increasing pH increased CY at salt levels of 0 and 0.3 M. These results indicate that NaCl and pH profoundly affected the emulsified MP system. Future work will be conducted on the rheological properties of the pork emulsified system as affected by adding non-meat protein.

• Microbiology and Biotechnology Letters
• /
• v.25 no.4
• /
• pp.420-426
• /
• 1997

Pseudomonas sp. lipase (lipase AK) catalyzed transesterification reaction between fructose and vinyl laurate in anhydrous pyridine. The product of this process was identified as monoester of fructose and vinyl laurate. The synthetic product has been found to be an excellent emulsifier. The synthetic bioemulsifier showed a good emulsification activity and stability in comparison with other commercial emulsifiers, and good emulsification activity on various emulsifying substrates.

• Journal of the Korean Society of Safety
• /
• v.13 no.1
• /
• pp.64-69
• /
• 1998

Three kinds of N-fluoroacyl carboxy pyridinium chlorides were synthesized by the reaction of pyridine-carboxylic acid such as pyridine-2-carboxylic, pyridine-3-carboxylic and pyridine-4-carboxylic acid with long chain perfluoroacyl chloride. The surface chemical properties including surface tension, foaming power, foam stability, effectiveness of wettability and solubilizing effect were measured. These compounds showed good surface activities as emulsifying agent, solubilizing agent and fire-fighting agent.

• Membrane and Water Treatment
• /
• v.10 no.5
• /
• pp.361-372
• /
• 2019

Effect of different alkane based solvents on the stability of emulsion liquid membrane was investigated using normal alkanes (n-hexane, n-heptane, n-octane and n-decane) under various operating parameters of surfactant concentration, emulsification time, internal phase concentration, volume ratio of internal phase to organic phase, volume ratio of emulsion phase to external phase and stirring speed. Results of stability revealed that emulsion liquid membrane containing n-octane as solvent and span-80 (5 % (w/w)) as emulsifying agent presented the highest amount of emulsion stability (the lowest breakage) compared with other solvents; however, operating parameters (surfactant concentration (5% (w/w)), emulsification time (6 min), internal phase concentration (0.05 M), volume ratio of internal phase to organic phase (1/1), volume ratio of emulsion phase to external phase (1/5) and stirring speed (300 rpm)) were also influential on improving the stability (about 0.2% breakage) and on achieving the most stable emulsion. The membrane with the highest stability was employed to extract acridine orange with various concentrations (10, 20 and 40 ppm) from water. The emulsion liquid membrane prepared with n-octane as the best solvent almost removed 99.5% of acridine orange from water. Also, the prepared liquid membrane eliminated completely (100%) other cationic dyes (methylene blue, methyl violet and crystal violet) from water demonstrating the efficacy of prepared emulsion liquid membrane in treatment of dye polluted waters.

• Journal of Pharmaceutical Investigation
• /
• v.37 no.5
• /
• pp.291-295
• /
• 2007

Prostaglandin $E_1\;(PGE_1)$ was formulated as two self-microemulsifying drug delivery systems (SMEDDS) composed of Cremophor $EL^{(R)}$ or Cremophor $ELP^{(R)}$ as a surfactant, ethanol as a cosurfactant and Labrafac $CC^{(R)}$ as an oil to develop liquid preparation for the treatment of erectile dysfunction. In pseudo-ternary phase diagram, viscous gel area and microemulsion area were defined. In the measurement of viscosity, the viscosity of two formulations increased gradually upon the addition of water and it decreased from the water contents over 40%. With excessive water, the present systems formed a microemulsion spontaneously. From these results, rte could expect that the present liquid $PGE_1$ SMEDDS formulations might stay within the urethra in the viscous state when contacting the moisture of the urethra and can be easily eliminated by urination. In long-term stability study, we could select one formulation more stable at the shelf storage condition of $4^{\circ}C$.

• Culinary science and hospitality research
• /
• v.5 no.2
• /
• pp.165-190
• /
• 1999

There are no reliable data about the effect on the baking industry in Korea yet. The damage caused by the product's aging is so much in the confectionary and baking industries. Therefore, the aging of bread is an economical problem which determines its commercial lifespan. In order to solve out this aging problem, this article dealt with the factors which give rise to the effect of starch on the aging and its inhibitory methods. 1. Control of the moisture content : Because the aging of starch occurs at 30~60% of moisture most frequently, controlling the moisture content above or below the above percentage can help restrain the aging to a certain degree. 2. Addition of sugars : The sugars become hydrated through hydrogenation with the moisture in the food. Thus, the sugars suppress the phenomenon of crumbling inside the food acting as a kind of dehydrator. 3. Use of an emulsifying agent : The emulsifying agent increases the stability of starch colloid liquid and suppresses the precipitation of starch molecules and the formation of crystallized range to prevent aging. 4. Method by freezing : The aging of starch does hardly occur reaching -2$0^{\circ}C$~-3$0^{\circ}C$ below zero. 5. Maintenance of warm condition : The freshness of bread is maintained at the 80% of humidity at 5$0^{\circ}C$.

• Applied Chemistry for Engineering
• /
• v.4 no.4
• /
• pp.683-691
• /
• 1993

All the activities and physical properties including surface tension, foaming power, foam stability, emulsifying power, dispersion effect, wettability and solubilization of sodium dodecyl polyoxyethylene ${\alpha}$-sulfo alkanoates aqueous solution were measured and critical micelle concentration was evaluated. Their cmc ebaluated by the surface tension method was $10^{-4}{\sim}10^{-5}mol/{\ell}$, and surface tension of the aqueous solution was decreased to 30~70dyne/cm. The experimental results for foaming power, foam stability, emulsifying power in benzene or soybean oil, dispersion effect in calcium carbonate, wettability and solubilization showed a good and efficient surface active properties, and then it would be expected that these products could be applied as O/W type emulsifier, dispersion agent.