• Applied Biological Chemistry
• /
• v.39 no.4
• /
• pp.282-286
• /
• 1996

To effectively utilize fish skin gelatin as a material for quality improvement in surimi gel from fish with a red muscle, conger eel skin gelatin was modified with succinic anhydride, and funtional properties such as emulsifying activity and emulsifying stability were determined. The degree of chemical modification incresed up to 0.3 g of succinic anhydride/g of gelatin, above this adding ratio a nearly constant value was reached. The maximum amount of modification was about 90%. The emulsifying activity and emulsifying stability of gelatin gradually increased up to 89.8% of succinylation extent, little changed above of succinylation extent. The other functional properties as solubility, water holding capacity, foam expansion and foam stability were improved following succinylation with 0.3 g of succinic anhydride/g of gelatin. Amino acid composition of succinylated gelatin was similar to that of unmodified gelatin. Heavy metal contents such as cadmium, lead, copper and zinc of succinylated gelatin were lower than those of unmodified gelatin.

• Korean Journal of Food Science and Technology
• /
• v.18 no.6
• /
• pp.468-474
• /
• 1986

The emulsifying properties of soy protein isolate were measured at various conditions, and the relationships between the emulsifying properties and solubility, viscosity, hydrophobicity, protein adsorption, the tension at water-oil interface were investigated. The emulsifying properties are minimum at the isoelectric point(pI), and the effect of pH parallels its effect on protein solubility. The emulsifying activity is increasing up to $50^{\circ}C$ and then is somewhat decreasing above that temperature, while the emulsion stability is continuously decreasing. Except for phosphates, the salts cause the decrease of the emulsifying properties. The hydrophobicity is increasing as the temperature increases and decreasing somewhat as pH gets lower. However, it is increasing substantially at pH below the pI. The maximum protein adsorption at the water-oil interface is 0.78, 0.47, and $0.33mg/m^2$ at pH 2, 7, and 4, respectively. The tension at water-oil interface is 19.76 dyne/cm in the absence of soy protein, whereas it is decreasing to 11.45-18.08 dyne/cm in the presence of the protein.

• Food Science of Animal Resources
• /
• v.31 no.5
• /
• pp.727-730
• /
• 2011

The effects of various NaCl levels (0, 0.3, and 0.6 M) and pH values (pH 5.0, 5.5, 6.0, and 6.5) on the emulsifying and gelling properties of pork myofibrillar protein (MP) were assessed. The emulsion stability index (ESI), emulsifying activity index (EAI), and creaming index were measured at a 1:20 ratio of MP to corn oil. The EAI and ESI of pork MP showed maximum values at pHs 6.0 and 6.5 and at 0.3 M NaCl, resulting in better emulsion properties. Additionally, the cooking yield (CY) and gel strength (GS) of emulsified MP gel were measured at an MP: corn oil ratio of 1: 2; GS increased with increasing levels of salt. At 0.6 M NaCl, GS decreased with decreasing pH from 5.5 to 6.5. GS and gelling properties were optimal at pH 5.5 in 0.6 M salt. The highest CY was observed at 0.6 M NaCl, regardless of the pH value. However, increasing pH increased CY at salt levels of 0 and 0.3 M. These results indicate that NaCl and pH profoundly affected the emulsified MP system. Future work will be conducted on the rheological properties of the pork emulsified system as affected by adding non-meat protein.

• Journal of Life Science
• /
• v.12 no.6
• /
• pp.745-751
• /
• 2002

Several bacterial strains producing biosurfactants were isolated from polluted marine and soil by oil. One of the strains named LSC11 showed strong production activity of biosurfactants. This strain was identified as a Bacillus sp. LSC11 based on the morphological, biochemical, and physiological characteristics. The biosurfactant, produced by the strain, emulsified crude oil, vegetable oil, and hydrocarbons. The surface tension of the culture broth of Bacillus sp. LSC11 decreased to 32 mN/m. The crude biosurfactant was obtained from the culture broth by acid precipitation, freeze drying, solvent extraction, and evaporation. The emulsifying activity of the biosurfactant showed better than the chemically synthesized surfactant (SDS, Span40, Span 85). The biosurfactants had strong properties as an emulsifying agent and as an emulsion-stabilizing agent.

• Journal of the Korean Applied Science and Technology
• /
• v.18 no.1
• /
• pp.55-59
• /
• 2001

These N-acyl amino acid surfactants is normally produced by reaction of acid anhydride with sodium ${\ell}-glutamate$ hydrolysates under Schotten-Baumann condition i.e., in alkaline aqueous medium. To avoid using fatty acid chlorides, acylations were also carried out with the fatty acids themselves or with their methyl esters, but unfortunately these methods cannot be used in practice, dodecenyl succinic anhydride, was to be studied for their suitability as acylating agents the production if acylated glutamine hydrolysates. The surface activities including surface tension forming power, forming stability and emulsifying power were measured. The experimental results revealed that the products have a good emulsifying power. Thus, there derivatives will be expected to be used an emulsifying agent for O/W type cosmetic emulsion.

• Food Science of Animal Resources
• /
• v.35 no.3
• /
• pp.315-321
• /
• 2015

The aim of the present work was to investigate the effect of NaCl concentration on the emulsifying and rheological properties of porcine myofibrillar protein (MF)-stabilized soybean oil and fish oil emulsion (SO-EMs and FO-EMs). Emulsions (EMs) were prepared from 1% MF with 10% SO or FO at various NaCl concentration (0-0.5 M). The emulsifying ability index (EAI) of the EMs increased with increasing NaCl concentration for both oil types. Conversely, increasing NaCl manifested decrease in the emulsion stability index (ESI). In addition, creaming index (CI) also increased with NaCl concentration. From the microscopic observation, droplets of the EMs were more aggregated at relatively higher NaCl concentrations, especially for FO-EMs. All EMs had a gel-like structure owing to G' > G" from the rheological analysis. Comparing the oil types, the emulsifying capacity of SO-EMs was more stable than that of FO-EMs at all NaCl concentrations as determined from the CI value and microscopic observation. Therefore, it can be concluded that SO-EMs and FO-EMs are more stable at relatively lower concentrations of NaCl. In addition, the dispersed stability of SO-EMs was better than that of FO-EMs at the same concentration of NaCl.

• Food Science of Animal Resources
• /
• v.39 no.2
• /
• pp.296-308
• /
• 2019

Although the yellow mealworm (Tenebrio molitor L.) is a promising alternative protein source, the effects of processing conditions on functional properties are unclear. In this study, a protein extract of yellow mealworm larvae (PEYM) was subjected to different heat temperature ($55^{\circ}C$, $75^{\circ}C$, and $95^{\circ}C$) with different time (20, 40, and 60 min) to evaluate the functional properties and protein oxidation. Different heat temperature treatment significantly affected the exposure of surface hydrophobicity of the proteins and protein molecule aggregation, which reached maximum levels at $95^{\circ}C$ for 60 min. Protein oxidation was inversely proportional to the temperature. Both the highest carbonyl value (1.49 nmol/mg protein) and lowest thiol value (22.94 nmol/mg protein) were observed at $95^{\circ}C$ for 60 min. The heating time-temperature interaction affected several functional properties, including solubility, emulsifying potential, and gel strength (GS). Solubility decreased near the isoelectric point (pH 5 to 6). As the temperature and heating time increased, emulsifying properties decreased and GS increased. The oil absorption capacity and foaming properties decreased and the water absorption capacity increased. These results confirmed that PEYM is a suitable source of proteins for processing and applications in the food industry.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.4
• /
• pp.1058-1065
• /
• 2017

Amino acid based surfactants as protein-surfactants is eco-friendly compound. So, amino acid based surfactants is expected as next generation surfactants. Amino acid based surfactants has high biodegradability, low toxicity and surface active properties. In this experiment, amino acid based surfactants, cocoyl glycine, was synthesized by glycine and triglyceride such as coconut oil and palm oil. And it was tested the surface tension, emulsifying properties, foam stability and HLB value. The synthesized surfactants was confirmed by FT-IR. Surface tension of surfactants synthesized by coconut oil on diluted aqueous solutions of surfactants was 31.2 dyne/cm at $1.0{\times}10^{-4}mol/L$. Surface tension of surfactants synthesized by palm oil on the diluted aqueous solutions of surfactants was 42.1 dyne/cm at $3.2{\times}10^{-5}mol/L$. Foam stability measured the foam height as time passed. Initial foam height of surfactants synthesized by coconut oil is 14.5 cm, and 10.7 cm after five minutes. Initial foam height of surfactants synthesized by palm oil is 3.0 cm, and 2.8 cm after five minutes. Foam height of surfactants synthesized by coconut oil was higher than surfactants synthesized by palm oil. But foam stability of surfactants synthesized by palm oil was better than surfactants synthesized by coconut oil. The emulsifying properties of synthesized surfactants are observed in benzene and soybean oil and emulsifying properties in organic solvent is better than in soybean oil.

• Korean Journal of Food Science and Technology
• /
• v.14 no.1
• /
• pp.49-56
• /
• 1982

The effects of measurement conditions on the emulsifying capacity(EC) and emulsion stability(ES) of proteins were studied in order to develop laboratory standard methods for the evaluation of emulsifying properties. The EC of proteins decreased with the increments of protein concentration and mixing rate. It increased with the increasing oil addition rate up to 0.8 ml/sec, but did not change at $0.8{\sim}1.2\;ml/sec$. The addition of sodiumchloride enhanced EC of proteins, attaining to the highest EC at 0.3M NaCl for Pro-Fam and 0.1M NaCl for Na-caseinate. The ES of Pro-Fam was higher than that of caseinate. The ES was increased by the increments of protein concentration, oil addition volume, mixing rate and mixing time. The EC and ES showed a close relation to the NSI of proteins, reaching to the lowest values of EC and ES at the isoelectric regions of proteins. The laboratory methods for measurements of emulsifying properties of proteins were established. The emulsifying properties of a laboratory-made soybean protein isolate were compared to those of commercial products by using the methods.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.24 no.5
• /
• pp.345-355
• /
• 1991

In order to effectively utilize the by-products of sea-food, the utilization of enzyme-modified flounder(Limanda aspera) skin gelatin as an emulsifier was investigated. In the experiment, the gelatin was extracted from the flounder skin with the heat-treatment at $60^{\circ}C$ and in pH 5.0 for 3 hrs with four volumes of distilled water and emulsifiers were enzymatically modified L-leucine alkyl esters$(L-leucine-OC_n$ : n= 2, 4, 6, 8 and 10) to the gelatin$(EMFSG-C_2,\;EMFSG-C_4,\;EMFSG-C_6,\;EMFSG-C_8,\;EMFSG-C_{10})$ for improving the functional properties such as emulsifying activity, emulsifying viscosity, whippability, electric conductivity, critical micelle concentration and interface tension, etc. Also, the functional properties of the L-leucine alkyl ester modified gelatins were compared with those of Tween-60 as reference. Molecular weights of the enzymatically modified flounder skin gelatin(EMFSG) were 20.5kDa. in $EMFSG-C_2.\;19.5 kDa.\;in\;EMFSG-C_4\;and\;16.5kDa.\;in\;EMFSG-C_6,\;EMFSG-C_8$ and $EMFSG-C_{10}$. respectively. Emulsifying activity and emulsifying viscosity in the modified gelatins were risen with increase of carbon number of the introduced L-leucine alkyl esters. Among the modified gelatins, $EMFSG-C_6$ exhibited the highest emulsifying stability and foaming stability, whereas $EMFSG-C_8$ showed the highest whippability. The electric conductivities of the all $EMFSG-C_n$ were linearly risen to critical micelle concentration(CMC) , therefore $EMFSG-C_{10}$ exhibited the lowest CMC value and interface tension, and dense particles in the microscopic observation. In conclusion, the best quality in functional properties was assured on $EMFSG-C_{10}$.