• 제목/요약/키워드: empirical ratio

검색결과 1,137건 처리시간 0.026초

폭발하중을 받는 강구조 중층 건물의 응답 및 해석 (Three Dimensional Responses of Middle Rise Steel Building under Blast Loads)

  • 황영서;이완수
    • 한국전산구조공학회논문집
    • /
    • 제24권6호
    • /
    • pp.629-636
    • /
    • 2011
  • 최근 들어 여러 테러에 의한 폭발사건에서 유발된 위험상황에서 보듯이 폭발에 의한 인명피해나 시설물의 손상은 우리가 고려하는 재해수준을 넘는 비참한 결과를 항상 수반한다. 하지만 폭발에 대한 구조물의 설계는 그 연구나 대책이 상당히 미비한 실정이다. 이에 미국건물설계기준(UBC94)을 바탕으로 내진설계(Welded Moment Resistant Frame)된 10층 건물의 폭발에 대한 해석적 모델을 제공하고자 한다. 현재 폭발하중의 정량적인 결과는 미국 육군(U.S.Department of Army)에서 개발된 경험적 방법에 기반을 둔 프로그램을 통해 폭간거리에 따른 하중의 크기와 분포를 알 수 있다. 본 연구에 사용된 폭원의 성격은 반구형 표면 폭발(Hemispherical Surface Burst)의 경우를 사용하였으며, 또한 선형 및 비선형 시간 이력해석을 통해 건물의 변위, 상대변위, 요구/수행비 및 비선형 거동에 대한 해석적 결과를 제공하였다. 또한 현재 사용되고 있는 내진기준(FEMA356)에 적용하여 소성힌지의 거동을 통해 폭발에 대한 건물의 성능수준을 예상하였다.

바텀애시 및 준설토 기반의 인공 경량골재를 활용한 구조용 콘크리트의 배합설계 절차 (Mix Design Procedure of Structural Concrete Using Artificial Lightweight Aggregates Produced from Bottom Ash and Dredged Soils)

  • 이경호;양근혁
    • 한국건축시공학회지
    • /
    • 제18권2호
    • /
    • pp.133-140
    • /
    • 2018
  • 이 연구의 목적은 바텀애시 및 준설토 기반의 인공 경량골재 콘크리트의 합리적 배합설계 절차를 제시하는 것이다. 25 배합의 실험결과를 바탕으로 경량골재 콘크리트의 목표성능(압축강도, 절건 밀도, 초기 슬럼프, 공기량)에 대하여 물-시멘트 비, 단위 시멘트양, 경량 잔골재 치환율을 결정하는 식을 제시하였다. 제안된 식과 절대용적 배합의 개념으로부터 각 구성요소들의 단위용적중량을 산정하였다. 제시된 배합설계 절차는 기존 결정에 효율적으로 이용될 수 있다.

국내항만의 효율성 결정요소 - 패널분석과 이분산 토빗모형을 이용하여 - (The Determinants of the Efficiency of Korean Ports - Using Panel Analysis and Heteroscedastic Tobit Model -)

  • 모수원
    • 한국항만경제학회지
    • /
    • 제24권4호
    • /
    • pp.349-361
    • /
    • 2008
  • 국내 항만 간 수출입 물동량 처리실적은 지속적으로 변화하고 있다. 수출에서는 부산항의 비중이 크고 빠르게 감소함과 더불어 국내 여타 항만들의 비중이 증가하고 있으며, 수입에서는 인천항의 비중이 빠르게 높아지고 있다. 이에 본고는 DEA모형을 이용하여 도출한 국내 항만의 수출효율성과 수입효율성을 종속변수로 하여 패널분석을 한다. 또한 패널 분석의 단점을 보완하기 위하여 효율성 척도를 종속변수로 하여 이분산 토빗모형을 적용한다. 먼저 모형을 설정하고 모형의 안정성을 담보한 후 패널분석을 실시하여 고정계수모형과 확률계수모형에 관계없이 항만수출비중은 음의 부호로 유의하나 항만수입비중은 유의하지 않다는 것과 지역수출비중은 음의 부호로 유의하나 지역수입비중은 효율성과 유의한 관계를 갖지 않는다는 것을 보인다. 규모더미변수를 투입하여 부산항을 제외한 광양항, 평택항, 인천항, 울산항과 같은 대규모 항만의 효율성이 목포항과 군산항과 같은 소규모 항만의 효율성보다 높지 않다는 것도 밝힌다. 이분산성을 고려한 type II 토빗모형을 적용하여 지역의 수출은 효율성에 부정적 영향을 미치는데 비해 지역항만의 수출은 긍정적 영향을 미치며, 지역내총생산은 수출효율성에 별다른 영향을 미치지 않는다는 것을 보인다. 이러한 결과를 통해 배후단지 조성과 항만의 효율성이 동의어가 아니라는 것도 보인다.

  • PDF

화강풍화토의 동적 거동 (Dynamic Behavior of Decomposed Granite Soils)

  • 이종규
    • 한국지반공학회논문집
    • /
    • 제15권1호
    • /
    • pp.175-183
    • /
    • 1999
  • 최근 우리나라도 내진설계의 필요성에 따라 지진시 등의 고변형률로부터 정밀기계기초에 미치는 미소변형률 진동까지 기초지반의 동적거동에 관한 연구가 점증하고 있는 실정이다. 한편, 화강풍화토는 국내에 가장 널리 분포되어 있는 대표적인 흙으로써 지반진동문제 해결에 필요한 지반계수 등의 동적거동 파악이 시급한 형편이나 이에 관한 연구는 극히 한정되어 있다. 본 연구는 수원지방의 화강풍화토에 대하여 간극비, 포화도가 다른 공시체를 제작하여 구속압력 및 반복응력비를 변화시켜 공진주시험과 반복삼축시험을 실시하여 불포화 화강풍화토의 동적거동을 고찰하였고 지반보강을 위하여 흔히 사용되는 흙-시멘트 혼합토에 대하여도 시멘트 혼합비와 간극비를 달리한 공시체에 대하여 같은 조건하에 동적거동을 구명하기 위한 두가지 같은 실험을 수행하였다. 연구결과 불포화 화강풍화토의 전단탄성계수는 표면장력에 지배되며 최적포화도는 간극비에 따라 공진주 시험인 경우 약 17%~l8%, 반복삼축시험인 경우 약 10%~l5% 로 나타났다. 또한, 수원지역의 화강풍화토에 대한 한계 변형률 범위와 평균전단탄성계수도 추정할 수 있었다. 한편, 일련의 공진주시험과 반복삼축시험의 결과를 토대로 하여 화강풍화토의 시멘트 혼합량에 따른 최대전단탄성계수 추정식을 비교적 조밀한 경우와 비교적 느슨한 경우로 나누어 제안하였다.

  • PDF

인구통계학적 분석을 이용한 우리나라의 센서스 및 동태자료에 대한 질적 평가 (Quality Evaluation for Census and Vital Statistics of Korea Using Demographic Analysis)

  • 전새봄;김성용;박유성
    • 한국조사연구학회지:조사연구
    • /
    • 제13권1호
    • /
    • pp.1-31
    • /
    • 2012
  • 인구통계학적 분석(Demographic Analysis: DA)은 센서스 및 동태자료의 포함오류에 대한 질적 평가를 위해 센서스 후 조사(Post Enumeration Survey: PES)와 함께 널리 이용되는 방법이다. 그러나 우리나라에서는 인구통계학적 분석이 시행된 적이 없으며, 해외 인구통계학 논문에서는 인구통계학적 분석을 통해 우리나라 사망자 등록의 후진성을 지적하고 있다. 본 논문에서는 다양한 인구통계학적 분석방법을 소개하고, 한국의 현실에 맞도록 변형시킨 방법을 제시한다. 또한 이를 이용하여 1985년부터 2010년까지의 센서스 및 사망자 자료를 분석한 결과, 우리나라의 사망자 자료는 해외 논문의 결과와 달리 완성도(completeness)가 높은 것으로 나타났다. 센서스의 연도별 연령별 누락률을 추정하여, 센서스의 비정상적인 코호트의 증가 현상, 성비, 그리고 연령비의 이상 현상에 대해 분석하였다.

  • PDF

2방향 전자밸브의 PWM 신호에 의한 압력제어 특성 (Pressure Control Characteristics of a 2-Way Solenoid Valve Driven by PWM Signal)

  • 정헌술;김형의
    • 대한기계학회논문집A
    • /
    • 제26권8호
    • /
    • pp.1565-1576
    • /
    • 2002
  • By way of driving a 2-way on/off solenoid hydraulic valve with a pulse width modulation (PWM) signal, control of the pressure in a certain volume is frequently used in various applications. However, the pressure built-up according to the duty ratio and carrier frequency of the PWM signal is not so well understood. In order to clarify the characteristics of 2-way valve hydraulic pressure control systems, in this paper two formula fur the mean and ripple of the load pressure were derived through theoretical analysis. And the accuracy of the derived formula were verified by comparison with the experimental test result. Generally 2-way valve systems are constructed as a bleed-off circuit, while 3-way valves are used as a control element in a meter-in circuit pressure control system. In a bleed-off circuit, the system supply pressure from a hydraulic power pack does not remain constant, but changes according to their external load. In turn, the relief valve in the hydraulic power pack reacts accordingly showing complicated dynamic behavior, which makes an analytical study difficult. In order to resolve the problem, simple but accurate empirical dynamic models fer a bleed-off system were used in the course of formula derivation. As the result, selection criteria for two major control parameters of the driving signal is established and the basic strategy to suppress the unnecessary pressure fluctuation can be provided for a hydraulic pressure control system using a 2-way on/off solenoid valve.

Central Composite Design Matrix (CCDM) for Phthalocyanine Reactive Dyeing of Nylon Fiber: Process Analysis and Optimization

  • Ravikumar, K.;Kim, Byung-Soon;Son, Young-A
    • 한국염색가공학회지
    • /
    • 제20권2호
    • /
    • pp.19-28
    • /
    • 2008
  • The objective of this study was to apply the statistical technique known as design of experiments to optimize the % exhaustion variables for phthalocyanine dyeing of nylon fiber. In this study, a three-factor Central Composite Rotatable Design (CCRD) was used to establish the optimum conditions for the phthalocyanine reactive dyeing of nylon fiber. Temperature, pH and liquor ratio were considered as the variable of interest. Acidic solution with higher temperature and lower liquor ratio were found to be suitable conditions for higher % exhaustion. These three variables were used as independent variables, whose effects on % exhaustion were evaluated. Significant polynomial regression models describing the changes on % exhaustion and % fixation with respect to independent variables were established with coefficient of determination, R2, greater than 0.90. Close agreement between experimental and predicted yields was obtained. Optimum conditions were obtained using surface plots and Monte Carlo simulation techniques where maximum dyeing efficiency is achieved. The significant level of both the main effects and interaction was observed by analysis of variance (ANOVA) approach. Based on the statistical analysis, the results have provided much valuable information on the relationship between response variables and independent variables. This study demonstrates that the CCRD could be efficiently applied for the empirical modeling of % exhaustion and % fixation in dyeing. It also shows that it is an economical way of obtaining the maximum amount of information in a short period of time with least number of experiments.

의료이용의 형평성에 관한 실증적 연구 -공.교 의료보험 피부양자를 대상으로- (Equity in the Delivery of Health care in the Republic of Korea)

  • 명지영;문옥륜
    • 보건행정학회지
    • /
    • 제5권2호
    • /
    • pp.155-172
    • /
    • 1995
  • This study is an empirical analysis on the equity in the delivery of heatlh care under the Korean Medical Insurance Corporation System. The purposes of this study are to find out effects of income on the health care utiliztion and measure the income-related inequity in the distribution of health care. This study was carried out based on the fact that the health insurance program has been organized to achieve the equity objective, "equal treatment for equal needs". Of 41, 828 insured persons who had been diagnosed in the 1993 Health Screening Test and utilifzation data from 1, January 1993 through 31, December 1993 were derived from the Benefit Managment File. Inequity was measured by means of I) share approach, ii) standardization concentration curve approach, iii) inequity index, iv) test for inequity. The major findings were as follows : 1. The expenditure shares of the top two quintile groups exceeded their morbidity shares, whereas the opposite was true of the bottom three quintile groups, Which showed a positive HI$_{LG}$ inequity index, suggesting the presence of some inequity favoring the rich group. 2. Compared with other residential areas, the rural area showed the highest positive HI$_{LG}$ irrespective of need indicatior applied. 3. Standardized expenditure concentration indices adjusted by age, gender and need structure were also found to be positive, and therefore still indicated that there has been inequity favoring the rich after the standardization. 4. The Loglikelihood Ratio (LR) test for the statistical significance of income-related inequity of medical care utilization was carried out using the logistic regression model. The resulting loglikelihood ratio test statistic value was 176, which did exceed the 0.5 percent critical value of the chi-square distribution with 28 degrees of freedom, which is 50.993. Therefore, the null hypothesis of no income-related inequity of medical care utilization was rejected at the 99.5 percent confidence level. 5. The Regression based F-test has been carried out for analyzing the income-related inequity of medical expenditure in terms of age, gender, morbidity indicators as explanary variables. The hypothesis of the absence of income-relate inequity was rejected for all need indicators at the 95% confidence level.nce level.

  • PDF

암반분류변수를 이용한 침하에 따른 수리전도도 변화 해석 (Hydraulic Conductivity Changes Due to Subsidence Using Rock Mass Classification Parameters)

  • 윤용균;김장순;김종우
    • 터널과지하공간
    • /
    • 제13권4호
    • /
    • pp.321-329
    • /
    • 2003
  • 채굴적의 붕괴에 따른 침하에 의해 발생하는 변형률 의존 수리전도도 변화를 조사하였다. 수직 및 전단벨변형률, 탄성계수감소비, 절리간격 등은 수리전도도 변화를 좌우하는 주요 인자들이다. 탄성계수감소비는 RMR에 의해 절리간격은 RQD로 표현함으로서 심하게 파쇄된 암반에서부터 무결암까지의 모든 조건을 나타내는 현지암반의 수리전도도 변화를 결정할 수 있다. 지표 부근에서의 수리전도도 변화는 별로 나타나지 않으며 채굴적 주변에서의 변화가 큰 것으로 나타났다. 침하에 의해 수리전도도가 1보다 커지는 지역은 채굴적 상부 약 20m 구간까지 인 것으로 조사되었다. 전단변형률도 채굴적 주변에서의 수리전도도 증가에 큰 역할을 하는 것으로 나타났다. RMR이 감소함에 따라 채굴적 주변의 수리전도도는 증가하는 것으로 나타났는데 이는 RMR이 낮은 불량 암반에서의 침하가 수리전도도에 큰 영향을 미친다는 것을 의미한다.

GSI 및 절리의 방향이 수리전도도 변화에 미치는 영향 (Effects of GSI and Joint Orientation on the Change of Hydraulic Conductivity)

  • 윤용균
    • 터널과지하공간
    • /
    • 제20권3호
    • /
    • pp.225-232
    • /
    • 2010
  • 본 연구에서는 절리에 작용하는 수직변형과 전단 팽창을 고려할 수 있는 수정된 3차원 변형률 의존성 수리전도도 변화 방정식을 제안하였다. 현지 암반을 직교절리가 발달한 매질로 가정하기 때문에 제시된 방정식을 사용하여 수리전도도의 이방성을 평가할 수 있다. 현지암반의 변형계수를 필요로 하는 탄성계수감소비를 손쉽게 결정하기 위하여 GSI와 교란계수를 기초로 하는 경험식을 사용하였다. 현지 암반 내에 존재하는 절리는 일반적으로 전체좌표계와 평행하지 않고 기울어져 있는 경우가 많기 때문에 기울어진 방향에서의 수리전도도를 구하기 위하여 변형률 회전식을 사용하였다. 해석 결과 GSI가 증가함에 따라 수리전도도는 감소하는 것으로 나타났다. 교란계수는 수리전도도의 변화 거동에 영향을 미치는 것으로 나타났는데 특히 GSI가 50 이상인 암반의 수리전도도 변화에 큰 영향을 미치는 것으로 해석되었다. 절리의 경사도 수리전도도 변화에 영향을 미치는 것으로 나타났다.