• Journal of the Korea Concrete Institute
• /
• v.21 no.6
• /
• pp.719-727
• /
• 2009

The requirements of the maximum shear reinforcement in the EC2-02 and CSA-04, which are developed based on the truss model, are quite different to those in the ACI-08 code and AIJ-99 code, which are empirical equations. The ACI 318-08, CSA-04, and EC2-02 codes provide an expression for the maximum amount of shear reinforcement ratio as a function of the concrete compressive strength, but Japanese code does not take the influence of the concrete compressive strength into account. For high strength concrete, the maximum amount of shear reinforcement calculated by the EC2-02 and CSA-04 is much greater than that calculated by the ACI 318-08. Ten RC beams having various shear reinforcement ratios were tested and their corresponding shear stress-shear strain curves and failure modes were compared to the predicted ones obtained by the current design codes.

• Journal of the Korean GEO-environmental Society
• /
• v.21 no.6
• /
• pp.5-11
• /
• 2020

Recently, due to the liquefaction caused by earthquakes in Pohang and surrounding areas, the importance of researches on the liquefaction assessment has increased. The possibility of liquefaction can be assessed using the geotechnical information. The cyclic resistance ratio (CRR) value used in the assessment of liquefaction can be determined by using the SPT-N values or shear wave velocity, V_s value. A study was conducted to compare the accuracy of the liquefaction assessment using these two types of geotechnical information, and concluded that the results using SPT-N values are more accurate than those using V_s values. The previous study speculated that the used V_s value was measured at a depth of 12 m uniformly without considering the critical depth of liquefaction. Therefore, 10 empirical equations that convert SPT-N values measured at critical depth of liquefaction into V_s values to confirm the validity of geotechnical information measured at 12 m points uniformly are used to assess the liquefaction possibility and the results were compared with the actual liquefaction results to confirm the accuracy. As a result, 7 out of 10 cases considering critical depth for liquefaction show higher accuracy than those not considered.

• Korean journal of applied entomology
• /
• v.51 no.2
• /
• pp.91-97
• /
• 2012

The dispersion indices, spatial pattern and sampling plan for pink citrus rust mite (PCRM), Aculops pelekassi, monitoring was investigated. Dispersion indices of PCRM indicated the aggregated spatial pattern. Taylor's power law provided better description of variance-mean relationship than Iwao's patchiness regression. Fixed-precision levels (D) of a sequential sampling plan were developed using by Taylor's power law parameters generated from PCRM on fruit sample (cumulated number of PCRM in $cm^2$ of fruit). Based on Kono-Sugino's empirical binomial the mean density per $cm^2$ could be estimated from fruit ratio with more than 12 rust mites per $cm^2$: $ln(m)=4.61+1.23ln[-ln(1-p_{12})]$. To determine the optimal tally threshold, the variance (var(lnm)) for mean (lnm) in Kono-Sugino equation was estimated. The lower and narrow ranged change of variance for esimated mean showed at a tally threshold of 12. To estimate PCRM mean density per $cm^2$ at fixed precision level 0.25, the required sample number was 13 trees, 5 fruits per tree and 2 points per fruit (total 130 samples).

• Journal of radiological science and technology
• /
• v.25 no.1
• /
• pp.63-71
• /
• 2002

The aim of this study Is to develop a simple and fast method which computes in-vivo doses from transmission doses measured doting patient treatment using an ionization chamber. Energy fluence and the dose that reach the chamber positioned behind the patient is modified by three factors: patient attenuation, inverse square attenuation. and scattering. We adopted a straightforward empirical approach using a phantom transmission factor (PTF) which accounts for the contribution from all three factors. It was done as follows. First of all, the phantom transmission factor was measured as a simple ratio of the chamber reading measured with and without a homogeneous phantom in the radiation beam according to various field sizes($r_p$), phantom to chamber distance($d_g$) and phantom thickness($T_p$). Secondly, we used the concept of effective field to the cases with inhomogeneous phantom (patients) and irregular fields. The effective field size is calculated by finding the field size that produces the same value of PTF to that for the irregular field and/or inhomogeneous phantom. The hypothesis is that the presence of inhomogeneity and irregular field can be accommodated to a certain extent by altering the field size. Thirdly, the center dose at the prescription depth can be computed using the new TMR($r_{p,eff}$) and Sp($r_{p,eff}$) from the effective field size. After that, when TMR(d, $r_{p,eff}$) and SP($r_{p,eff}$) are acquired. the tumor dose is as follows. $$D_{center}=D_t/PTF(d_g,\;T_p){\times}(\frac{SCD}{SAD})^2{\times}BSF(r_o){\times}S_p(r_{p,eff}){\times}TMR(d,\;r_{p,eff})$$ To make certain the accuracy of this method, we checked the accuracy for the following four cases; in cases of regular or irregular field size, inhomogeneous material included, any errors made and clinical situation. The errors were within 2.3% for regular field size, 3.0% irregular field size, 2.4% when inhomogeneous material was included in the phantom, 3.8% for 6 MV when the error was made purposely, 4.7% for 10 MV and 1.8% for the measurement of a patient in clinic. It is considered that this methode can make the quality control for dose at the time of radiation therapy because it is non-invasive that makes possible to measure the doses whenever a patient is given a therapy as well as eliminates the problem for entrance or exit dose measurement.

• Korean Journal of Social Welfare
• /
• v.39
• /
• pp.157-179
• /
• 1999

This study is an empirical research to analyze how many private income transfers in Korea decrease poverty rate, to compare the effects of private income transfers' decreasing poverty rate with income classes. This study has utilised the Family Income and Expenditure Survey to estimate the poverty ratio in urban areas and Unemployment Household Survey which Korea Institute for Health and Social Affairs has investigated at 1998. Majour findins are these. First, Sizes of private transfers incomes are much than that of public transfers incomes. The rates in receiving private transfers income are ten times higher than that in receiving public transfers income among urban worker's household. The mean of private transfer income are about six times larger than that of public transfer income among urban worker's household. Second, the effects of private income transfers' reducing poverty rates are not large. After private transfers, urbarn workers' households are about 10 per cent away from its poverty line, and unemploy households are only 3 per cent away from its poverty line. Third, especially, private income transfers are hardly reducing poverty rates among extreme poverty class. After private transfers, urban workers' households which their incomes are within low 5%, are not away from its poverty line at all.

• Korean journal of communication and information
• /
• v.30
• /
• pp.35-87
• /
• 2005

This research explores the empirical confirmation of the Internet development including from the period of innovation to the time of social-cultural use in today. The research focused on how tradition news media rover about the Internet developed from early to today, and understanding the media characteristics on the each stages from news frame. The research Is designed to conduit content analysis from 1989 to 2004, then this research is divided four(4) stages of the Internet development: innovation, diffusion, commercial usage, social-cultural usage. The results shows that there are significant different coverage by the stages. First of all, the news coverage pattern shift from technology focused on early stages to social usage focused on the later stages. This research confirms that the ratio of the seriation(technology) coverage defined when social usage is increased, on the other hand skeumorphs(social usage and content) coverage is increased in the commercial and social usage stages. This coverage pattern among news media does not such a big different and there is no competitive coverage. Moreover, the news coverage shifted from thematic coverage on early stages to episodic coverage while the number of usage increasing. In addition, the tone of coverage has not been changed significantly.

• Journal of the Korean Geosynthetics Society
• /
• v.15 no.2
• /
• pp.45-54
• /
• 2016

Double deck tunnels are considered to have a large demand in a near future for solving traffic congestion problems and overcoming the limitations in constructing new tunnels. This study presents a numerical investigation using finite element (FE) analysis on the behaviors of the tunnels and the stability of pillars in a divergence section where single tunnel is diverged from a main line double deck tunnel. The effects of the separation distance between the diverged and the main tunnels and the ground condition were examined through the FE analysis by varying the separation distance from 0.1D to 2.0D (D: diameter of main tunnel) and the rock class from class I to V, respectively, and the analysis results were compared with those using empirical methods, strength-stress ratio, and the volume of interference. The FE analysis results indicated that the separation distance has a larger effect on tunnel behaviors, compared with the rock strength, and a single tunnel with a large cross section is more favorable than two separated tunnels for tunnel stability when the separation distance is below 0.7D.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.10
• /
• pp.4359-4368
• /
• 2011

Among several macroeconomic missteps blamed for the recent global financial crisis including the social problems of income distribution and the lack of proper financial remedies, two of them have received particular attention: the global BOP(Balance of Payment) imbalance and the misguided monetary policy. Such BOP imbalance was blamed for massive foreign exchange investment flows from Asia into the U.S., triggering the financial and real estate bubble in America. The latter refers to the excessively loose monetary policy of the U.S. Federal Reserve, which pushed financial institutions and households into reckless investment behavior in search of higher returns. Given the abuse of certain innovative financial techniques and new investment instruments that have been created in recent decades, both collateralized debt obligations (CDOs) and credit default swaps (CDS) enjoyed a symbiotic and toxic relationship prior to the financial crisis This paper is organized as follows: The first section analyzes the real causes of the recent financial crisis. The second details the role of CDOs and CDS. Then, to identify key determinants of the CDS spreads in an emerging capital market, the sample data of major Korean firms' CDS spreads are used to estimate the risk premium by utilizing the multiple regression analysis. The empirical test result indicates that Korean 3-year treasury bond rate(TYIELD), market to book value ratio(MV/BV), and assets size(INASSETS) are shown to demonstrate statistically significant influences on the changes of the CDS premium for sample firms.

• Journal of Distribution Science
• /
• v.13 no.7
• /
• pp.53-61
• /
• 2015

Purpose - This research analyzes overseas expansion support systems for small- and medium-sized enterprises in Germany and Japan. Germany and Japan have developed overseas expansion support policies for such enterprises. The study then explores the implications for Korea and its local governments. Research design, data, and methodology - We did a comparative analysis of Japan and Germany and their support for overseas expansion of small and medium companies. Data were mainly collected from the Ministry of Economy, Trade and Industry (Japan) and the Germany Trade and Invest (Germany) agency through statistics and literature surveys, and analysis studies. Results - First, human resources cultivation and funding support policies, which both Germany and Japan use as part of small- and medium-sized enterprise policies, should be modified to Korean circumstances and to reflect its own small- and medium-sized enterprise support needs. Second, both the German policies that support overseas expansion of small- and medium-sized enterprises and those of Japan's include the philosophy and methods that put an emphasis on these enterprises, despite the fact that there are big differences in the overseas policies in these two countries. Third, German and Japanese governments are embracing the idea that small- and medium-sized enterprises are key to their national economies and implementing policies based on the ratio occupied by these enterprises in the domestic consumption or GDP. In other words, Germany and Japan consider small- and medium-sized enterprises as central to their nation's industry, and assess them as economic industry that should definitely exist for the continued survival of big businesses, and not just as merely supplemental to big business. Fourth, whereas Germany emphasizes support to product exhibition in its overseas expansion support policies, Japan is providing integrated support containing foreign direct investment to small- and medium-sized enterprises. Fifth, there are differences in the overseas expansion support in Germany and Japan in terms of their support to big business. Whereas Germany considers support to big business unnecessary, Japan is implementing active support policies to areas corresponding to big business. Korea will have to benchmark the policies of Germany and Japan, and decide whether or not to give full support to small- and medium-sized enterprises, while excluding areas supporting big business. Conclusions - Based on this analysis of German and Japanese overseas expansion support policies, we need to choose the policies that will engender a solid outcome and derive modified policies for the circumstances of Korea. Additionally, we can use the comparison of the overseas support policies of Japan and Germany to choose small- and medium-sized enterprise overseas expansion support policies for Korea. However, we cannot provide specific overseas support policies by industry. This point will be referenced as a limitation of this study. In future research, we expect that some researchers will take an empirical approach to exploring Korean overseas expansion support through collecting cases of overseas support policies and interviewing policy authorities.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.6
• /
• pp.647-657
• /
• 2011

This paper describes the moment capacity of flexural members with local buckling based on a series of FE and experiment results. Thin-walled flexural members undergo local, lateral-torsional, or interactive buckling according to the section geometries and lateral boundary conditions. Flexural members with large width-to-thickness ratios in the flanges or the web may undergo local buckling before lateral-torsional buckling. Local buckling has a negative effect on the flexural strength based on the lateral-torsional buckling of flexural members. This phenomenon should be considered in the estimation of the flexural strength of thin-walled sections. Flexural members with various width-to-thickness ratios in their flanges and web were analyzed. Initial imperfections in the local buckling mode, and residual stresses, were included in the FE analyses. Simple bending moment formulae for flexural members were proposed based on the FE and test results to account for local and lateral-torsional buckling. The proposed bending moment formulae for the thin-walled flexural members in the Direct Strength Method use the empirical strength formula and the grosssection modulus. The ultimate flexural strengths predicted by the proposed moment formulae were compared with the AISC (2005), Eurocode3 (2003), and Korean Highway Bridge Design Specifications (2010). The comparison showed that the proposed bending moment formulae can reasonably predict the ultimate moment capacity of thin-walled flexural members.