• 한국레이저가공학회지
• /
• 제14권3호
• /
• pp.7-11
• /
• 2011

As an active emission display using emissive polymer has had much attention recently, needs for a selective patterning of emissive layer for those displays have been increased abruptly. Therefore, the various laser sources in terms of its wavelength has been used for laser direct patterning. In this work, the feasibility of those processes is examined using numerical analysis and the experimental investigation. A sample has multi-layered structure, emissive polymer on aluminum which is deposited on a glass substrate. Key factors for optimizing the laser patterning of the emissive polymer are considered into the control of ablation products, large-sized particle, and the choice of the appropriate wavelength for minimizing the heat affected zone and the remnant layer.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.601-604
• /
• 1999

Electroluminescence(EL) devices based on organic thin films have attracted lots of interests in large-area light-emitting display. Recently, many EL researcher have interested a new emissive organic material. In this study, light-emitting organic electroluminescent devices were fabricated using Langmuir-Blodgett(LB) technique with new emissive organic material. This new emissive organic material were synthesis by our teams and we called PECCP [poly(3,6-N-2ethylhexyl carbazoly cyanoterephthalidene)] which has strong electron donor group and electron acceptor group in main chain repeat unit. This material has good solubility in common organic solvent such as chloroform. THF, etc. and has a good stability in air. In here, the new emissive material is applied to Langmuir-Blodgett(LB) method because our new material has a good stability in air. Optimum conditions of film deposition were examined by a surface pressure-area( $\pi$ -A) isotherms with various factors. The LB film were deposited on a indium Tin Oxide(ITO) glass. We were investigated by measuring current-voltage(I-V) characteristics. Also we were measured the UV/visible absorption at about 410nm and PL spectrum at about 530nm. We are attempt to the electroluminescence device properties of the new emissive material by Langmuir-Blodgett(LB) technique.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.692-695
• /
• 2008

Large area emissive displays have problems with nonuniform pixel characteristics and their individual ageing. A pixel integrated driver with pixel based optical feedback is presented to solve these problems. Photodetectors, optical feedback circuit and data handling capabilities are integrated in a high voltage CMOS technology.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.105-110
• /
• 2006

The highly integrated nature of polymer based organic light emitting diode (POLED) microdisplay technology, coupled with low voltage and low power electroluminescent light generation, combine to offer a very promising technology for use in portable and personal electronics products. We briefly describe the technology before discussing how to engineer the color gamut using whiteemitting polymer materials, microcavity device structure and color filter absorbance.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권12호
• /
• pp.620-625
• /
• 2004

In this paper, we studied the emissive electric field due to the communication signal and the noise in medium voltage power-line. There are many types of conductive noise in power-line channel, which gives rise to radiation. And if the DMT carrier signal was excited, the current by this term was added to the current by noise and, generate radiation. We calculated input impedance by means of signal input network model of medium voltage power-line channel for calculating these currents. We calculated currents by input impedance and, calculated the emissive electric field by this calculated currents. From the measurement results, we knew that the measured results are very similar to the calculated results and if the input signal power level was higher than -40 dBm, the emissive electric field exceeds FCC radiation limit level 69.5 dB$\mu$V/m.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.537-539
• /
• 2008

WOLED devices were fabricated using two complementary color method with two emissive layers of blue and orange color respectively. WOLED's color purity was optimized as changing thickness of blue emissive DPVBi layer with most efficient red emissive layer doped with 0.2% DCJTB in $Alq_3$ and obtained better white color coordinates of (0.36, 0.33) at 9V.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.859-862
• /
• 2008

We present a new tool to measure precisely the emissive properties of displays at the pixel level with submicrometric spatial resolution. It is useful to check the technological defects and their impact on the emissive properties of the displays. Backlight films and transflective and reflective displays are measured.

• 한국염색가공학회지
• /
• 제22권2호
• /
• pp.118-122
• /
• 2010

The interest in textile which has far-infrared ray emissive property has been increased in the field of biophysics and medicine. In this study, far-infrared ray emissive polyurethane nano-web was obtained using electrospinning of polyurethane(PU) solution mixed with ceramics powder and far-infrared ray emissive properties of nano-web were evaluated by measuring far-infrared ray emission power and emissivity(%). To investigate the influence of concentration of ceramics powder in PU solution and temperature for far-infrared ray emissive properties, far-infrared ray emissivity was measured at varied temperature using various nano-web including varied concentration of ceramics powder. Polyurethane nano-web was characterized by SEM to observe the deposition of ceramics powder on polyurethane nano-web surface. The far-infrared ray emissivity was increased with the concentration of ceramics powder in the nano-web. The far-infrared ray emission power was enhanced with increasing temperature of the samples; however, far-infrared ray emissivity was decreased with increasing temperature because the increase of emission power of ceramic containing nano-web was lower than the emission power of black body one.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.111-114
• /
• 1999

Electroluminescence(EL) devices based on organic thin films have been attracted lots of interests in large-area light-emitting display. In this stuffy, an emissive layer was fabricated using Langmuir-Blodgett(LB) technique in organic light-emitting (OLEDs). This emissive organic material was synthesized and named PECCP[poly(3.6-N-2-ethylhexyl carbazolyl cyanoterephthalidene)] which has a strong electron donor group and an electron acceptor group in main chain repeated unit. This material has good solubility in common organic solvents such as chloroform. THF, etc, and has a good stability in air. The Langmuir-Blodgett(LB) technique has the advantage of precise control of the thickness down to the molecular scale, In particular, by varying the film thickness it is possible to investigate the metal/polymer interface. Optimum conditions for the LB film deposition are usually determined by investigating a relationship between a surface pressure $\pi$ and an effective are A occupied by one molecule on the subphase. The LB films were deposited on an indium-tin-oxide(ITO) glass at a surface pressure of 10 mN/m and dipping speed of 12 mm/min after spreading PECCP solution on distilled water surphase at room temperature, Cell structure was ITO/PECCP LB film/Alq$_3$/Al. We considered PECCP as a hole -transport layer inserted between the emissive layer and ITO. We also used Alq$_3$ as an emissive layer and an electron transport layer. We measured current-voltage(I-V) characteristics, UV/visible absorption, PL spectrum and EL spectrum of the OLEDs.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2044-2049
• /
• 2007

In order to predict the thermal radiation induced from alumina particle cloud in the plume of solid propellant motor, view factor method is applied to space shuttle SRB and the result is compared with that of monte carlo method. For this purpose, radiative characteristics, such as particle cloud temperature distribution, effective emissivity or emissive power of particle cloud are studied. In the case of effective emissivity, inverse wavelength method is applied and plume reduction characteristic length is used for emissive power distribution. As a result, thermal radiation using view factor method gives more conservative results than that using monte carlo method. So it can be used for preliminary design of thermal protection system.