• Asian Journal of Atmospheric Environment
• /
• 제6권2호
• /
• pp.111-117
• /
• 2012

To establish area specific control strategy for ambient ozone in the Seoul Metropolitan Area (SMA), the maximum ozone concentration in each local government district in the SMA were estimated by using the OZone Isopleth Plotting Package for Research (OZIPR) model. The modeling period was June 2000 and the emission inventory data used were from National Institute of Environmental Research (NIER). Except the islands of Incheon, whole Seoul and Incheon areas were volatile organic compounds (VOCs) limited, i.e., decreasing the oxides of nitrogen ($NO_X$) emission alone may increase the maximum ozone concentration upto certain point. In Gyeonggi, 12 areas were VOCs limited while 12 areas were in between VOCs limited and $NO_X$ limited, i.e., decreasing both $NO_X$ and VOCs emission may decrease the maximum ozone concentration. Majority of the estimated ozone values were lower than the measured values. The reason could be inaccuracy in emission inventories and/or transport from other areas. The same calculation was carried out for June 2004 and it was found that Seoul was still in the VOCs limited condition.

• 한국환경과학회지
• /
• 제5권2호
• /
• pp.229-241
• /
• 1996

This study was performed to find the most desirable emission reduction for each mobile source pollutant and the optimal control strategy at a given level of expenditures in Pusan City in 2000 by using the interactive s-constraint method developed by Chang-Hyo Lee and Hyung-Wook Kim, which isone of the mathematical programming models. The most desirable emission reduction is 7093 ton/year for particulate (TSP), 4871 ton/year for NOx, 5148 ton/year for HC and 36779 ton/year for CO. The optimal control strategy is as follows; 1. As to passenger car and taxi, limiting VKT (vehicle kilometers travelled) in congested areas will be necessary. In addition to this, improving vehicie inspection Program should be enforced. 2. As to small-gasoline bus, traffic adaptive control system will be necessary. 3. As to small-diesel bus, non-adjustable engine parameters will have to be applied. .4. As to heal bus and heart truck, catalytic trap oxidizer and limiting VKT in congested areas will do necessary. 5. As to motorcycle, 2-cycle motorcycles should be converted to 4-cycle motorcycles.

• 한국분무공학회지
• /
• 제16권3호
• /
• pp.134-139
• /
• 2011

Recent research has focused on engine combustion technology as well as application of after-treatment in order to comply with emission regulation. However, it is much more efficient way to control emissions from engine itself and furthermore research on engine control will provide the direction of after-treatment technology in future. Furthermore, emission standard regulation for passenger diesel vehicles has been stringent compared to others and nano-particles will be included in EURO6 regulation in Europe and similar emission standard will be introduced in Korea. A 3.0 liter high speed diesel engine equipped with by CRDI system of 160MPa injection pressure, and an intake/exhaust system of V type 6 cylinder turbo-intercooler was applied. The injection duration and injection quantity, pilot injection types which are related to CRDI and air/fuel ratio control applied by EVGT were changed simultaneously. Standard experiment procedure constituted dilution apparatus and CPC system to collect nano-particles and these test results were compared with regulated materials of CO, HC, NOx and investigated their relations and characteristics of nano-particles.

• 한국자동차공학회논문집
• /
• 제23권6호
• /
• pp.623-632
• /
• 2015

This study proposes a control strategy of the common rail pressure with a fuel injection limitation algorithm to reduce particulate matter (PM) emissions under transient states. The proposed control strategy consists of two parts: injection quantity limitation and rail pressure adaptation. The injection limitation algorithm determines the maximum allowable fuel injection quantity to avoid rich combustion under transient states. The fuel injection quantity is limited by predicting the burned gas rate after combustion; however, the reduced injection quantity leads to deterioration of engine torque. The common rail pressure adaptation strategy is designed to compensate for the reduced engine torque. An increase of the rail pressure under transient states contributes to enhancement of the engine torque as well as reduction of PM emissions by promoting atomization of the injected fuel. The proposed control strategy is validated through engine experiments. The rail pressure adaptation reduced the PM emission by 5-10% and enhanced the engine torque up to 2.5%.

• 오토저널
• /
• 제8권4호
• /
• pp.1-12
• /
• 1986

대기오염의 역사는 산업의 발전과 그 맥락을 같이 한다. 자동차가 대기오염의 한 Source로 주목 을 받기 시작한 것은 1940년대초 LA의 극심한 Smog발생의 원인을 찾으면서 부터이며, 1950년대 에 와서 Haagen Smit박사에 의해 Photo Smog의 Mechamism이 해석되면서 Smog를 유발하는 HC, NOx는 자동차 배출 Gas가 50% 이상을, 유해한 CO는 90%이상을 기여한다는 것이 파명되 어, 1965년 미국 California주에서 자동차에 대한 배출 Gas규제가 최초로 시작되었다. 자동차 배출 Gas로서 규제대상은 HC(타화수소), CO, NOx(질소산화물)이며, 엔진 Crankcase Emission(Blow-by Gas), Tail pipe로부터 배출되는 Exhaust Emission, 그리고 연료 Tank, 기 화기등의 연료계로부터 배출되는 Evaporative Emission에서의 HC, CO, NOx 각 상한치를 규제 하고 있다.

• Journal of Power Electronics
• /
• 제19권6호
• /
• pp.1582-1590
• /
• 2019

A new method for reducing the common-mode current generated by the voltage variations in a two-inverter air conditioner system by applying a synchronized pulse-width modulation (PWM) strategy is proposed. The PWM signals of the master-mode inverter are generated based on the reference voltage, while those of the slave-mode inverter are output in the opposite direction when the master-mode inverter changes its switching state. However, the slave-mode control results in a mismatch between the reference voltage and the actual output voltage that is modified by synchronized control operation. The proposed method is capable of reducing and controlling this voltage error by performing signal selection in the vector space of the slave-mode inverter, which mitigates the distortion of the phase current. The efficacy of this method in reducing conducted emissions has been validated both theoretically and experimentally.

• 한국자동차공학회논문집
• /
• 제14권3호
• /
• pp.178-185
• /
• 2006

This paper investigates the steady-state combustion characteristics of the Homogeneous charge compression ignition(HCCI) engine with variable valve timing(VVT) and dimethyl ether(DME) direct injection, to find out its benefits in exhaust gas emissions. HCCI combustion is an attractive way to lower carbon dioxide($CO_2$), nitrogen oxides(NOx) emission and to allow higher fuel conversion efficiency. However, HCCI engine has inherent problem of narrow operating range at high load due to high in-cylinder peak pressure and consequent noise. To overcome this problem, the control of combustion start and heat release rate is required. It is difficult to control the start of combustion because HCCI combustion phase is closely linked to chemical reaction during a compression stroke. The combination of VVT and DME direct injection was chosen as the most promising strategy to control the HCCI combustion phase in this study. Regular gasoline was injected at intake port as main fuel, while small amount of DME was also injected directly into the cylinder as an ignition promoter for the control of ignition timing. Different intake valve timings were tested for combustion phase control. Regular gasoline was tested for HCCI operation and emission characteristics with various engine conditions. With HCCI operation, ignition delay and rapid burning angle were successfully controlled by the amount of internal EGR that was determined with VVT. For best IMEP and low HC emission, DME should be injected during early compression stroke. IMEP was mainly affected by the DME injection timing, and quantities of fuel DME and gasoline. HC emission was mainly affected by both the amount of gasoline and the DME injection timing. NOx emission was lower than conventional SI engine at gasoline lean region. However, NOx emission was similar to that in the conventional SI engine at gasoline rich region. CO emission was affected by the amount of gasoline and DME.

• 한국대기환경학회지
• /
• 제20권2호
• /
• pp.263-276
• /
• 2004

According to the annual emission estimates of U.S.A., fugitive dust, the particulate matter entrained in the ambient air which is caused from man-made or natural activities such as movement of soil, vehicles, equipments and windblown dust, contributes 90% of PM$_{10}$ emission. In spite of an importance of fugitive dust emission in PM$_{10}$ estimation, it is excluded in the national emission inventory of Korea so far. In this paper, an emission inventory of fugitive dust for each region and in major cities throughout the country, which is the first time in Korea these values have been compiled, is presented. Sources of fugitive dust emission have been classified into paved/unpaved roads, construction operations, agricultural operations, and natural sources. The emission factors of the existing fugitive dust emission were reassessed in a way that significantly improved the reliability of the estimated result. The Korea's first national emission inventory of fugitive dust by administrative districts proposed in this paper would provide scientific reference data for establishing an reduction strategy of PM$_{10}$ and preparing effective control measures, and would contribute to academic achievement in the atmospheric environments field and the establishment of CAPSS (Clean Air Policy Support System).stem).

• Journal of Korean Society for Atmospheric Environment
• /
• 제15권E호
• /
• pp.45-54
• /
• 1999

The effectiveness of NOx emission reductions from power plants to alleviate persistent ozone nonattainment in the esterm Unites States was investigated with a focus on the Northeast Corridor, centered on New York City. The 1995 ozone episode along with the 2007 base case emission scenario was used with the Variable-Grid Urban Airshed Model(UAM-V) to determine ozone concentrations. Several scenarios based on EPA's proposal issued on October 10, 1997 were examined. Although it is widely recognized that the eastern United States includes a large Nox-sensitive region(e.g., Sillman, 1999), the study revealed that reducing NOx emissions from power plants beyond 500 miles (800km) was not effective for reducing ozone exceedances in the region. It was also found that NOx emissions from power plants play an important role in local ozone exceedances.

• International Journal of Control, Automation, and Systems
• /
• 제5권1호
• /
• pp.43-50
• /
• 2007

Reheating furnace is an essential facility of a rod mill plant where a billet is heated to the required rolling temperature so that it can be milled to produce wire. Although it is very important to obtain information on billet temperatures, it is not feasible during furnace operation. Consequently, a billet temperature profile should be estimated. Moreover, this estimation should be done within an appropriate time interval for an on-line application. In this paper, a billet heat transfer model based on 2D FEM(Finite Element Method) with spatially distributed emission factors is proposed for an on-line billet temperature estimation and also a measurement is carried out for two extremely different furnace operation patterns. Finally, the difference between the model outputs and the measurements is minimized by using a new optimization algorithm named uDEAS(Univariate Dynamic Encoding Algorithm for Searches) with multi-step tuning strategy. The obtained emission factors are applied to a simulation for the data which are not used in the model tuning for validation.