• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.3
• /
• pp.234-240
• /
• 2001

Using RF magnetron sputtering, amorphous carbon(a-C) thin films as electron filed emitter were fabricated. these a-C thin films were deposited on Si(001) substrate at several temperatures. The field electron emission property of these a-C thin films was estimated by a diode technique. As the result, we observed that the field emission properties of the films were changed singnificantly with the substrate temperature and structural features of a-C film. The field emission properties were promoted by higher substrate temperatures. Furthermore N-doped a-C film exhibits more field emission property than that of undoped a-C film. These results are explained as change of surface morphology and structural properties of a-C film.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.5
• /
• pp.66-72
• /
• 2004

In this study, the effects of oxygen component in fuel and exhaust gas recirculation(EGR) method on the exhaust emissions has been investigated for a D.I. diesel engine. It was tested to estimate change of exhaust emission characteristics for the commercial diesel fuel and oxygenate blended fuel which has five kinds of blending ratio. Dimethoxy methane(DMM) contains oxygen component 42.5% in itself, and it is a kind of effective oxygenated fuel for reduction of smoke emission. It was affirmed that smoke emission was decreased with increasing of DMM blending ratio. But, NOx emission was increased compared with commercial diesel fuel. It was needed a NOx reduction counterplan that EGR method was used as a countermeasure for NOx reduction. It was found that simultaneous reduction of smoke and NOx emission was achieved with DMM blended fuel and cooled EGR method(1015%).

• KIEAE Journal
• /
• v.10 no.5
• /
• pp.123-129
• /
• 2010

This study aimed at analyzing the trend of carbon dioxide emission for direct and indirect areas by using inter industry relations table between 2000, 2003 and 2005 in the key building materials and components. Results of this study are as follows; First, the material and components for this study was selected in 20 industries of products such as sand, gravel, cement, concrete articles, rebar, and steel bar. Second, among the 20 selected key building materials, the group with the highest carbon-dioxide emission was shown in ready-mixed concrete, concrete articles, and primary aluminum goods. Third, as a result of analyzing the changes to the units of carbon dioxide emission according to passage of time, the number of items which is changed in such as sustained increase or decrease over time was insignificant in carbon-emission change trend.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.519-523
• /
• 2000

Using plasma-enhanced chemical vapor deposition (PECVD), carbon thin film as electron field emitter were fabricated. These carbon thin film were deposited on Si(100) substrate at several RF power. These film were estimated by raman spectroscopy, scanning electron microscopy, and field emission. The field electron emission property of these carbon thin film was estimated by a diode technique. As the result, we observed that the field emission properties of these films were promoted by higher RF power. These results are explained as change of surface morphology and structural properties of carbon thin film

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.816-817
• /
• 2007

As UNFCC(United Nations Framework Convention on Climate Change) is enhanced, Korea will perform a CO2 reduction duty. The CO2 reduction duty will effect Korea power system because coal and oil thermal generations emit large CO2 form about 46% of total CO2 emission. Moreover various alternatives should be designed to comply with CO2 reduction duty. In this paper, we analysis resource planning considering CO2 emission constraints and emission trading. And we analysis resource planning under using LP(Linear Programing) and MIP(Mixed Integer Programing).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.1
• /
• pp.837-844
• /
• 2015

The purpose of this paper is to suggest the method of creation and management of urban green field based on carbon emission reduction. For a case study, Daejeon Metropolitan City in Korea was chosen. For the study, the relevant concepts of green field and carbon emission plans are reviewed as a theoretical research, and current problems of the urban green field are surveyed focused on metropolitan cities in Korea. Implementation plans of park and green in Daejeon Metropolitan City were analysed in the aspect to carbon emission reduction, climate change responding and urban green field expansion. Finally, as a result of the study, the method of creation and management of urban green field based on carbon emission reduction in the perspectives of urban structure change, green field network, conservation of green field and relevant institutions are suggested.

• KIEAE Journal
• /
• v.12 no.3
• /
• pp.89-94
• /
• 2012

The international community is paying close attention to the climatic changes caused by the meteorological anomalies. In response to such phenomena, after the adoption of the United Nations Framework Convention on Climate Change in 1992, efforts to actively respond to the meteorological changes are proliferating all over the world; even in the Republic of Korea, the issue to tackle the meteorological changes has emerged as a top-priority national agenda. In the year of 2008, after the declaration of the low-carbon, green-growth paradigm by the government, the UNFCCC COP15 has announced a 30% reduction target of the emission of the greenhouse gases by 2020 as compared to the "Business As Usual, BAU" and has also confirmed, as a commitment plan to achieve reduction in the emission of greenhouse gases, the reduction target of greenhouse gases for all sectors, industries and years. (26.9% for buildings) Since the construction of the new apartment houses in the year of 2001, the "Building Energy Efficiency Rating", has been applied to newly constructed building complexes, built in 2010; the accumulated emission reduction has been evaluated at around 450,000toe and the accumulated carbon dioxide emission reduction is at $826,000tCO_2$ And through the prediction of these values under various scenarios (New construction, new construction / expansion of existing uses, when transferred to 1stgrade), the effects on the degree of reduction of greenhouse gases by the increased certification of the Building Energy Efficiency Rating are an alyzed and it is our aim to express the importance of the certification system capable of carrying out a quantitative evaluation of the building energy in order to establish the strategy to reduce the emission of carbon dioxide.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.7
• /
• pp.3302-3309
• /
• 2011

This study showed the reduced greenhouse gas(GHG) emission through GHG inventory establishment and process diagnosis for a response to climatic change. Also, it presented a direction for company's response to climatic change. Ulsan from its industrial complex has many energy-intensive companies such as petrochemistry, automobile and shipbuilding, and as we judged that the systematic reduction of GHG emission would make a considerable reduction of GHG emission in national dimension we executed this study from 10 companies. It showed the high rate of direction GHG emissions by its process that 5 of 10 companies calculated GHG emission and built its inventory. Also, in order to reduce energy and GHG, it produced about 227,554 million won of its economic effect and 50,740 ton/yr of its sparing effect.

• Journal of Climate Change Research
• /
• v.8 no.3
• /
• pp.239-245
• /
• 2017

This study aimed to suggest priority for developing emission factor (EF) and to develop the methodology of quantitative assessment of EF in the forestry sector. Based on the stock-difference method, 17 kinds of EFs (27 EFs based on forest types) were required to calculate the carbon emission in the forestry sector. Priority for developing EFs followed the standards, which is a development plan by the government agency, importance of carbon stock for greenhouse gas, and EFs by the species. Currently, the most urgent development of EFs was carbon fraction in biomass and carbon stock in dead wood. Meanwhile, the quantitative assessment of EF consisted of 7 categories (5 categories of compulsory and 2 categories of quality evaluation) and 12 verification factors. Category in compulsory verification consisted of administrative document, determination methodology of emission factors, emission characteristic, accuracy of measurement and analysis, and data representative. Category in quality evaluation consisted of data management and uncertainty estimates. Based on the importance of factors in the verification process, each factor was scored separately, however, the score needs to be coordinated by the government agency. These results would help build a reliable and accurate greenhouse gas inventory report of Korea.

• Korean Journal of Environmental Agriculture
• /
• v.42 no.4
• /
• pp.444-449
• /
• 2023

The current study involved the calculation of air pollutant emission factors (EFs) generated from the incineration of agricultural residues. The process included sample collection, weight measurement, moisture measurement, incineration system configuration, and concentration measurement. The average CO emission factor of gaseous air pollutants from the incineration of barley and wheat agricultural residues was calculated as 0.08289 kg/kg and 0.06665 kg/kg, respectively, whereas the average NO_X emission factor for barley and wheat agricultural residues was determined to be 0.00518 kg/kg and 0.00185 kg/kg, respectively. In the existing air pollutant emission calculation manual, the EF is presented only for barley. Therefore, in this study, we have introduced the EF for wheat, previously absent in the calculation manual. Additionally, the air pollutant calculation manual presents the EF of air pollutants as one value, but in this study, EF values corresponding to 2.5% and 97.5% were presented in consideration of the distribution of experimental values as shown in EMEP/EEA data.