• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 춘계종합학술대회
• /
• pp.906-909
• /
• 2005

오늘날 원격의료가 새롭게 부각되는 것은 정보통신기술의 발달이 원격의료를 뒷받침해 주고 있기 때문이기도 하면서 새로운 의료서비스에 대한 제공자와 수요자들의 인식전환이 이루어지고 있기 때문이라고 할 수 있다. 매우 빠르게 발전하고 있는 진단과 치료기술을 이러한 의료를 필요로 하는 사람들에게 제공하는 접근성의 보장 문제를 해결할 수 있는 대안으로 WPKI를 이용한 모바일 환경 의료인증 시스템을 제안 하고자 한다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 추계종합학술대회
• /
• pp.768-771
• /
• 2005

오늘날 원격의료가 새롭게 부각되는 것은 정보통신기술의 발달이 원격의료를 뒷받침해 주고 있기 때문이기도 하면서 새로운 의료서비스에 대한 제공자와 수요자들의 인식전환이 이루어지고 있기 때문이라고 할 수 있다. 매우 빠르게 발전하고 있는 진단과 치료기술을 이러한 의료를 필요로 하는 사람들에게 제공하는 접근성의 보장 문제를 해결할 수 있는 대안으로 이용한 모바일 환경의료인증 시스템을 제안 하고자 한다.

• International Journal of Automotive Technology
• /
• 제6권2호
• /
• pp.191-196
• /
• 2005

A full-bead of multi-layer-steel (MLS) engine head gasket is used to seal the combustion gas. Finite element analyses were conducted to assess the dependence of the sealing performance of full-bead on the forming process consisting of embossing and flatting operations. It is demonstrated that the sealing performance is enhanced with more severe deformation of the bead plate during the embossing, i.e., with the increase in the punching depth, the punch height, the punch width and the friction coefficient of the bead plate against the punch and die, and with the decrease in the width of die cavity. Meanwhile, the flatting process that is employed to adjust the height of the embossed full-bead has no influence on the sealing performance.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.219-222
• /
• 2004

This research is about SDM (Structural Dynamics Modification) technique using embosses. SDM using embosses do not need to add additional mass element ana model of embosses and resulting huge calculation for getting analytical solution of an embossed structure. The object of this research is to suggest a method to guide placing embossment in a structure to raise its natural frequencies. Two methods to optimize model with embossing are suggested, indepuldently. The former is response surface analysis by neural network. And the latter is an indirect method using modal dynamic strain energy.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.1205-1208
• /
• 2006

Today, our city structure is being complicated from the development of industry. Invisible losses, life and fortune loss caused by arson is embossed in our society. The preparation of counter plan about increasing factors of fire damage is not easy. With respect to mankind life, however, it is very important. Therefore, the focus of this research examine refuge degree in each smoke density level when a fire break out in the space. I evaluated auditory guide facility thorough real scale test. In this thesis, I will propose the efficient refuge deriving facilities.

• BMB Reports
• /
• 제56권1호
• /
• pp.10-14
• /
• 2023

Organoids derived from stem cells or organ-specific progenitors are self-organizable, self-renewable, and multicellular three-dimensional (3D) structures that can mimic the function and structure of the derived tissue. Due to such characteristics, organoids are attracting attention as an excellent ex vivo model for drug screening at the stage of drug development. In addition, since the applicability of organoids as therapeutics for tissue regeneration has been embossed, the development of various organoids-based regenerative medicine has been rapidly progressing, reaching the clinical trial stage. In this review, we give a general overview of organoids and describe current status and prospects of organoid-based regenerative medicine, focusing on organoid-based regenerative therapeutics currently under development including clinical trials.

• 한국강구조학회 논문집
• /
• 제29권6호
• /
• pp.479-486
• /
• 2017

주름웨브는 강구조물에서 세장해진 웨브의 대안으로 널리 사용되고 있으나 주름진 웨브와 플랜지 사이의 용접은 제작비용의 상승이라는 문제점을 안고 있다. 이러한 경제적인 문제점을 해결하기 위해, 엠보싱웨브를 가지는 보(이하, 엠보싱웨브 보)를 개발하게 되었다. 엠보싱웨브는 냉간프레스 가공에 의하여 형성되고, 웨브와 플랜지는 기계화자동용접에 의하여 접합된다. 엠보싱웨브 보의 구조적 성능을 확인하기 위해, 동일한 크기의 일반 H-형강 실험체도 제작되었고 가력실험이 수행되었다. 실험에 의하여 엠보싱웨브 보 실험체는 H-형강 실험체에 비하여 강도면에서 약 40%정도의 높은 성능을 보였다. 엠보싱웨브 보와 주름웨브 보의 형상은 다르지만, Eurocodes의 주름웨브보 설계식을 이용하여 엠보싱웨브 보의 내력을 예측한 결과 실험결과값과는 상이한 결과를 보였다. 따라서 기존 Eurocodes를 엠보싱웨브보에 적용하는 것은 무리가 있으므로 엠보싱웨브 보의 현장사용을 위해서는 적절한 설계식이 제안되어야 할 것으로 판단한다.

• Earthquakes and Structures
• /
• 제23권4호
• /
• pp.373-384
• /
• 2022

To improve the seismic performance of suspended ceiling structures, various vibration-damping devices have been developed. However, the devices made of metals have a limit in that they cause large deformation and seriously damages the exterior of the suspended ceiling structure from the wall. As a results, their strengthening effect of the suspended ceiling structure was minimal. Thus, this study employed a spring and vibration-proof rubber effectively controlled vibrations without increasing horizontal seismic loads on the ceiling to enhance the seismic resistance of suspended ceiling structures. The objective of the study is to examine the dynamic properties of a seismic damping-isolation unit (SDI) with various details developed. The developed SDI was composed of a spring, embossed rubbers, and prestressed bolts, which were the main factors enhancing the damping effect. The shaking table tests were performed on eight SDI specimens produced with the number of layers of embossed rubber (n_s), presence or absence of a spring, prestressed force magnitude introduced in bolts (f_ps), and mass weight (W_m) as the main parameters. To identify the enhancement effect of the SDI, the dynamic properties of the control specimen with a conventional hanger bolt were compared to those of the SDI specimens. The SDI specimens were effective in reducing the maximum acceleration (A_{c max}), acceleration amplification factor (α_p), relative displacement (δ_R), and increasing the damping ratio (ξ) when compared to the control specimen. The A_{c max}, α_p, and δ_R of the SDI specimens with two rubbers, spring, and f_ps of 0.1f_by, where f_by is the yielding strength of the screw bolt were 57.8%, 58.0%, and 61.9% lower than those of the conventional hanger bolt specimens, respectively, resulting in the highest ξ (=0.127). In addition, the α_p of the SDI specimens was 50.8% lower than those specified in ASCE 7 and FEMA 356. Consequently, to accurately estimate the α_p of the SDI specimens, a simple model was proposed based on the functions of f_ps, stiffness constant of the spring (K), W_m, and n_s.

• 한국기계가공학회지
• /
• 제13권5호
• /
• pp.35-42
• /
• 2014

The influence of sine wave striated surface roughness on load carrying capacity of a bearing is studied for thin film effect of slider bearing. A Reynolds equation appropriate for slider bearing is used in this paper for analysis and it is discussed using finite difference method of central difference scheme. For a slider bearing with sine wave simple roughness form, several parameters such as pressure, load capacity and shear stress of the bearing can be obtained and also this results can be stored in sequential data file for latter analysis. After all, their distribution can be displayed and analyzed easily by using the matlab GUI technique. The parameters such as amplitude, number of waviness and slope of the surface are used for discussing the load carrying capacity of the rectangular bearing. The results reported in this paper should be applied to the other slider bearing such as rectangular or round embossed surface of slider bearing.

• 대한기계학회논문집A
• /
• 제29권2호
• /
• pp.228-231
• /
• 2005

In this paper, we present reusable quartz master fabricated by electron-beam lithography and dry etching process of quartz, and results of injection molding based on the reusable quartz master for the manufacturing of nano-scale information media. Since patterned structures of photoresist can be easily damaged by separation (demolding) process of nickel stamper and master, a master with photoresist cannot be reused in stamper fabrication process. In this work, we have made it possible of the repeated use of master by directly patterning on quart in nickel stamper fabrication process. We have designed and fabricated four different specimens including 100nm, 140nm 200nm and 400nm pit patterns. In addition, both intaglio and embossed carving patterns are fabricated for each specimen. In the preliminary test of injection molding, we have fabricated polycarbonate patterns with varying mold temperature. We have experimentally verified the fabrication process of the reusable quart master and possibility of quartz master as direct stamper.