• Bulletin of the Korean Mathematical Society
• /
• v.49 no.5
• /
• pp.1089-1099
• /
• 2012

We construct three kinds of complete embedded singly-periodic minimal surfaces in $\mathbb{H}^2{\times}\mathbb{R}$. The first one is a 1-parameter family of minimal surfaces which is asymptotic to a horizontal plane and a vertical plane; the second one is a 2-parameter family of minimal surfaces which has a fundamental piece of finite total curvature and is asymptotic to a finite number of vertical planes; the last one is a 2-parameter family of minimal surfaces which fill $\mathbb{H}^2{\times}\mathbb{R}$ by finite Scherk's towers.

• Bulletin of the Korean Mathematical Society
• /
• v.34 no.1
• /
• pp.9-17
• /
• 1997

Define $\bar{g}{\upsilon, \omega) = -\upsilon_1\omega_1 + \cdots + \upsilon_n\omega_n$ for $\upsilon, \omega in R^n$. $R^n$ together with this metric is called the Lorentzian n-space, denoted by $L^n$, and $R^n$ together with the Euclidean metric is called the Euclidean n-space, denoted by $E^n$. A Lorentzian surface in $L^n$ means an orientable connected 2-dimensional Lorentzian submanifold of $L^n$ equipped with the induced Lorentzian metrix g from $\bar{g}$.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.153-154
• /
• 2014

전사 방식은 금속 패턴을 다른 기판에 전사시키는 방법으로, 대면적 디스플레이에 응용하기 위해 나노 사이즈 패턴을 반복적으로 전사하는 새로운 공정을 개발하였다. 나노선 임베드 구조체와 전해 도금 방식을 이용하여 나노선 네트워크 구조체를 반복적으로 이종 기판에 전사시키는데 성공하였으며, 기존의 전사 방식인 건식 방식에 비해 공정 속도를 높이고 전사되는 패턴의 사이즈를 효과적으로 낮추는 것을 확인하였다.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.2
• /
• pp.524-530
• /
• 2013

In this study, we describe the most expected behavior of cells on the modified surface and the correlation between the modified substrates and the response of cells. The physicochemical characteristics of substrates played an essential role in the adhesion and proliferation of cells. Glass and polymer substrates were modified using air plasma oxidation, and the surfaces were coated with self-assembled monolayer molecules of silanes. The PDMS substrates embedded with parallel micropatterns were used for evaluation of the effect of topologically modified substrate on cellular behaviour. BALB/3T3 fibroblast cells were cultured on different surfaces with distinct wettability and topology, and the growth rates and morphological change of cells were analyzed. Finally, we found the optimum conditions for the adhesion and proliferation of cells on the modified surface. This study will provide insight into the cell-surface interaction and contribute to tissue engineering applications.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10b
• /
• pp.376-381
• /
• 1992

This paper presents an expert system for the segmentation of a 2.5-D image. The results of two segmentation approaches, edge-based and region-based, are combined to produce a consistent and reliable segmentation. Rich information embedded in the 2.5-D image is utilized to obtain a view independent surface patch description of the image, which can facilitate object recognition considerably.

• Journal of the Chungcheong Mathematical Society
• /
• v.19 no.3
• /
• pp.219-224
• /
• 2006

In this article, we prove that a properly embedded minimal surface in $R^3$ of genus zero must be one of Riemann's minimal examples if outside of a solid cylinder it is the union of planar ends with the same torques at all integer heights.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.45-45
• /
• 2007

Capacitors among the embedded passive components are most widely studied because they are the major components in terms of size and number and hard to embed compared with resistors and inductors due to the more complicated structure. To fabricate a capacitor-embedded PCB for in-line process, it is essential to adopt a low temperature process (<$200^{\circ}C$). However, high dielectric materials such as ferroelectrics show a low permittivity and a high dielectric loss when they are processed at low temperatures. To solve these contradicting problems, we studied BMN materials as a candidate for dielectric capacitors. processed at PCB-compatible temperatures. The morphologies of BMN thin films were investigated by AFM and SEM equipment. The electric properties (C-F, I-V) of Pt/BMN/Cu/polymer were evaluated using an impedance analysis (HP 4194A) and semiconductor parameter analyzer (HP4156A). $Bi_2Mg_{2/3}Nb_{4/3}O_7$(BMN) thin films deposited on copper clad laminate substrates by sputtering system as a function of Ar/$O_2$ flow rate at room temperature showed smooth surface morphologies having root mean square roughness of approximately 5.0 nm. 200-nm-thick films deposited at RT exhibit a dielectric constant of 40, a capacitance density of approximately $150\;nF/cm^2$, and breakdown voltage above 6 V. The crystallinity of the BMN thin films was studied by TEM and XRD. BMN thin film capacitors are expected to be promising candidates as embedded capacitors for printed circuit board (PCB).

• Composites Research
• /
• v.17 no.5
• /
• pp.15-24
• /
• 2004

Longitudinal strains (${\varepsilon}_x$) of the core and skin layers in glass fiber reinforced plastic (GFRP) cross-ply composite laminates have been measured using the embedded optical fiber sensor of absolute extrinsic Fabry-Perot interferometer (A-EFPI). Transmission optical microscopy was used to investigate the damage behavior around the A-EFPI sensor. Foil-type strain gauges bonded on both the upper and lower surfaces were used for the measurement of the surface strains. It was shown that values of ${\varepsilon}_x$ in the interior of the skin layer and the core layer measured by embedded A-EFPI sensor were significantly higher than that of the specimen surface measured by strain gauges. The experimental results agreed well with those from finite element analysis on the basis of uniform stress model. Large strains in the core layer led to the occurrence of many transverse cracks which drastically reduced the strain at failure of optical fiber sensor embedded in the core layer.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.12 no.5
• /
• pp.319-330
• /
• 2017

In remote USV (Unmanned Surface Vehicle) maritime operation, the remote operation and control technic and autonomous control technic is required and the emergency mode algorithm is needed certainly for sailing and accomplishing various surveillance, reconnaissance, and underwater search missions of USV. In this paper, we review the countermeasures in emergency situation of the existing USV system (Barracuda) and propose the emergency mode algorithm considering the operation and control, and autonomous control level for the stable USV operation in case of emergency. We analyzed the autonomous control level in view of the mission complexity and environmental difficulty, and human interface, and verified the performance of the autonomous control level when we apply four emergency mode algorithms. It is expected that more stable and reliable operation and cotrol are possible if the proposed algorithm is applied to the environments requiring the various multi-mission USV sailing and mission achievement.

• Textile Coloration and Finishing
• /
• v.20 no.6
• /
• pp.1-7
• /
• 2008

The effects of $TiO_2$ contents and UV irradiation treatment on the surface properties of PLA films embedded with $TiO_2$ nanoparticle were investigated. Whereas UV irradiation decreased reflectance of the treated PLA films proportionally with increasing UV energy, the reflectance of PLA/$TiO_2$ films increased with increasing UV energy. The UV irradiation treatment caused PLA/$TiO_2$ blend films more polar as indicated in the generation of new carbonyl group and decrease in zeta potentials, which was more pronounced with the introduction of $TiO_2$. Upon UV irradiation, $TiO_2$ particles appeared on the film surface as observed in SEM images. The PLA/$TiO_2$ blend films showed photocatalytic properties such as photobleaching of methylene blue, deodorization of ammonia and antimicrobial activity in comparison with pure PLA films.