• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.10a
• /
• pp.626-631
• /
• 2006

본 연구는 2006년 7월 집중호우에 의해 많은 인적.물적 피해가 발생한 강원도 지역의 피해 현장을 조사하였으며, 그 중 성토사면붕괴를 붕괴유형별로 구분하고 발생원인과 특성을 분석하여 그에 따른 적절한 대책방안을 제시하였다. 집중호우에 의한 성토사면의 붕괴유형 중 토석류에 의한 도로횡단 배수구조물의 기능상실로 유수가 노면으로 침출되고 수압이 발생하여 도로가 유실된 유형과 하천선형 불량으로 만곡수충부(물이 직접 부딪히는 부분)에서 유속이 빨라져 세굴에 의한 붕괴가 전체성토붕괴사면의 83%를 차지하였다. 이에 대한 대책방안으로는 토석류를 계곡상부에서 부터 예방할 수 있는 방법으로 사방댐 및 그물망 공법 등이 좋은 대책방안이 될 수 있으며, 토석류에 의한 유송잡물을 모두 통과할 수 있도록 충분히 큰 배수시설을 설치하는 방법도 좋은 대책방안이 될 수 있다. 무엇보다 열대성 국지 폭우를 이제 일상의 한반도 기후현상으로 받아들여 주먹구구식의 일회성 대책방안을 지양하고 바뀐 강우특성과 빈도를 고려하여 계획 홍수위를 재산정하고 그에 따라 하천정비계획을 재검토해야 할 것이다.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.369-378
• /
• 2010

In this study, a computer program to predict the behavior of laterally loaded single pile and pile groups was developed by using a beam-column analysis in which the soils are modeled as nonlinear springs by a family of p-y curves for subgrade modulus. The special attention was given to the lateral displacement of a single pile and pile groups due to the soil condition and the cap rigidity. The analysis considering group effect was carried out for $2{\times}2$ and $3{\times}3$ pile groups with the pile spacing 3.0B, 4.0B and 5.0B. Based on the results obtained, it is found that the overall distributions of deflection, slope, moment, and shear force in a single pile give a reasonable results irrespective of cap connectivity conditions. It is also found that even though there are some deviations in deflection prediction compared with the observed ones, the prediction by present analysis simulates much better the general trend observed by the centrifuge tests than the numerical solution predicted by PIGLET.

• Journal of the Korean GEO-environmental Society
• /
• v.19 no.4
• /
• pp.17-26
• /
• 2018

This study systematically examines the changes in the compressive and tensile strength of soil cement reinforced by natural hair fiber, which is regularly produced from human. Extensive experimental tests of various test specimens have been carried out in a laboratory. Several factors are considered, including the soil type, amount of cement, amount of fiber, fiber length, loading type, and curing age. The test results indicate that both the compressive and tensile strengths are significantly affected by the fiber, either increasing or decreasing depending on the conditions. The increase in tensile strength is significant in the sand-based soil cement due to the tensile resistance of the fiber which is interlocked with the surrounding soil or cement particles. The natural fiber provides a larger strain to failure due to its extensibility, which allows greater deformation. Based on the test results, natural hair fibers can be an effective and environmentally friendly way to improve soil ground subjected to tensile loading, such as an embankment slope, road subgrade, or landfill, thus reducing the cost for cement and waste treatment. The study results provide a useful information of better understanding the mechanical behavior of natural hair fiber in soil cement and the practical use of waste materials in civil engineering. The findings can be practically applied for improving earth structures under tensile loading.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2000.10a
• /
• pp.477-483
• /
• 2000

Fly ash is the unburned residue resulting from the combustion of coal in utility and industrial boilers such as thermal power plants. Annually about 5 million tons of fly ash is being produced in korea. Less than 25 percent of total volume of fly ash is currently being used effectively for some ways. In the future, the volume of fly ash discharge from thermal power stations will be increasing more and more, and the development of the utilization of high volume fly ash is required. Fly ash has a lower compacted density and specific gravity than coarse grained natural aggregates but equivalent strength properties indicating that the fly ash could be used as a structural fill materials. So, clay-fly ash mixtures can be used as a fill material in the construction of embankments. Laboratory tests have been carried out to determine the physical, chemical, and geotechnical characteristics of the clay and fly ash. The fly ash is mixed with the clay in different proportions and the geotechnical characteristics of the mixtures have been studied also. In this study describes the results of the experimental study. The implications of the use of clay and clay-fly ash mixtures on the stability of embankments are discussed.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.4
• /
• pp.71-76
• /
• 2012

Shear strength of soil is power that resists failure and sliding according to any face in soils and one of the most important factors during engineering properties of soil. Shear strength is used for engineering science problems as bearing capacity methods of foundation or piles, slope stability after dam or Cutting Embankment and stability problem analysis of soils as lateral earth pressure of soil structures, ets. This study has analyzed shear strength change of samples classified 2.00mm(10sieve)와 0.85mm(20sieve), 0.475mm(40sieve) using direct shear tester after removing and drying cohesive soil ingredient of Weathered granite soil Therefore, this study would help studies about shear strength properties by particle size.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.9 no.4
• /
• pp.202-208
• /
• 2005

In Korea it tends to rely on foreign standards for the stability management of the embankment slope on the soft clay layer. The Matsuo-Kawamura's method, the Kurihara's method, the Tominaga- Hashimoto's method and the Shibata-Sekiguchi's method are generally employed at site. In this study these slope stability methods are investigated and the applicability of the stability management methods is evaluated through numerical analysis. It is evaluated that stability is overestimated to some degree by the Matsuo-Kawamura method. According to the result by the Tominaga-Hashimoto method there is some risk of sudden failure. This implies that the careful attention is necessary for the management of monitoring the field data. Even though the stability tends to be underestimated by the Kurihara's method, however, it is estimated that this method is applicable to the field when the probable uncertainty at site is considered. For the Shibata-Sekiguchi's method, there is some difficulties in determining the failure index for the practical application, it is considered as safe when the existing estimated failure index is greater than ${\Delta}_q/{\Delta}{\delta}$. In this study, however, it is evaluated to be safe as well when ${\Delta}_q/{\Delta}{\delta}$ to load shows the tendency of constant increase.

• Journal of the Korean earth science society
• /
• v.31 no.6
• /
• pp.563-572
• /
• 2010

Both multi-channel temperature monitoring and geophysical electric survey were performed together for an embankment to assess the leakage zone. Temperature variation according to space and time on the inner parts of engineering constructions (e.g.: dam and slope) can be basic information for diagnosing their safety problem. In general, as constructions become superannuated, structural deformation (e.g.: cracks and defects) could be generated by various factors. Seepage or leakage of water through the cracks or defects in old dams will directly cause temperature anomaly. This study shows that the position of seepage or leakage in dam body can be detected by multi-channel temperature monitoring using thermal line sensor. For that matter, diverse temperature monitoring experiments for a leakage physical model were performed in the laboratory. In field application of an old earth fill dam, temperature variations for water depth and for inner parts of boreholes located at downstream slope were measured. Temperature monitoring results for a long time at the bottom of downstream slope of the dam showed the possibility that temperature monitoring can provide the synthetic information about flowing path and quantity of seepage of leakage in dam body. Geophysical data by electrical method are also added to help interpret data.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.5
• /
• pp.93-101
• /
• 2005

The formation of slopes is unavoidable under the special circumstance of Korea where $7%$ of the whole area are composed of mountains and civil engineering projects such as road and site developments are increasing with industrial development and horizontal expansions of urban area. Stability of slopes is one of quite important issues under special meteorological characteristics that over two-thirds of annual average rainfall is concentrated in summer season and the localized torrential downpour is getting more frequent recently. As a result of these circumstances, partial slope failures by debris flow of the high water content soils occur frequently in cut soil slopes. In this case of debris flow slope failure, slope declination method is selected fur the stable recovery because it is impossible to recover entirely by existing recovery methods. Seeding or special grass planting methods are followed separately without exception. The method by which entire recover with bigger stability ratio would be possible and grass planting work would be done simultaneously is developed. For debris flow failure slopes, this study secured the safety of slopes by preventing the inflow of rainwater and scour using geosynthetics-reinforced embankment, and created nature-friendly slopes by planting trees on the slopes.

• Korean Journal of Agricultural Science
• /
• v.38 no.2
• /
• pp.325-330
• /
• 2011

In order to revive the ecological function of degraded rivers, a total restoration plan for riverbeds and riparians needs to be developed. Previous evaluations for rivers were mainly focused on the river's physical structures. Therefore, this research has developed indicators to evaluate a riparian restoration considering biodiversity. Through literature and previous cases review, 4 fields and 13 indicators are selected for the evaluation. Four fields are biodiversity, habitat diversity, connectivity and habitat functionality. In the biodiversity field, 4 indicators of the exuberant extent of herbaceous vegetation and their diversity, the exuberant extent of shrub and woody plants and their diversity, the number of plant communities and naturalized plants are included. Habitat diversity are comprised of 4 indicators of the longitudinal continuity of vegetation, the mixture of plant communities, the extent of plant type color fruit abundance and the distribution of vegetation. Connectivity includes 3 indicators of target distribution, the shore slope of low water channels and the extent of artificial embankment materials. Habitat functionality has 2 indicators of the status of food supply plants and the habitat functionality. The value weighting for the fields and indicators has been calculated based on the AHP(Analytic Hierarchy Process) method. 50 experts were surveyed with quantifiable questionnaire, among them 43 experts have more than 10 yesrs experiences in the nature restoration field. The selected and weighted indicators have been tested to the 12 sections in Gap stream located in Daejeon. In conclusion, the indicators are feasible and the selected indicators could be used to establish the direction and objectives of riparian restoration.

• Geomechanics and Engineering
• /
• v.15 no.5
• /
• pp.1101-1111
• /
• 2018

This study aims to present accurate soil modeling and validation of a single roadside guardrail post as well as a single concrete pile installed near cut slopes or compacted sloping embankment. The conventional Winkler's elastic spring model and p-y curve approach for horizontal ground cannot directly be applied to sloping ground where ultimate soil resistance is significantly dependent on ground inclination. In this study, both grid-based 3-D FE model and particle-based SPH (smoothed particle hydrodynamics) model available in LS-DYNA have been adopted to predict the static behavior of a laterally loaded guardrail post. The SPH model has potential to eliminate any artificial soil stiffness due to the deterioration of the node-connected Lagrangian soil mesh. For this purpose, this study comprises two parts. Firstly, only 3-D FE modeling has been tested to show the numerical validity for a single concrete pile in sloping ground using Mohr-Coulomb material. However, this material option cannot be implemented for SPH elements. Nevertheless, Mohr-Coulomb model has been used since this material model requires six input soil data that can be obtained from the comparative papers in literatures. Secondly, this work is extended to compute the lateral resistance of a guardrail post located near the slope using the hybrid approach that combines Lagrange FE elements and SPH elements by the suitable node-merging option provided by LS-DYNA. For this analysis, the FHWA soil material developed for application to road-base soils has been used and also allows the application of SPH element.