• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.3
• /
• pp.375-380
• /
• 2020

In this study, we tried to evaluate the mechanical properties of Polycarbonate(PC) and acrylonitrile-butadiene-styrene(ABS) plastic materials, which are frequently used as parts of home appliances and machinery, when repeated impacts were applied. A repeating impact tester for this research was designed and manufactured to apply repetitive impacts. Two types of plastic were repeatedly impacted under a constant load, and a tensile test was performed on the plastic material that was impacted. The tensile strength of PC plastic materials that received impact more than 2000 times was reduced by about 45 % and elongation was reduced by about 10 % when compared to impact free specimens. On the other hand, in ABS plastic, a reduction of tensile strength of about 20 % was observed at about 2,000 impacted specimen, but at about 20,000 repetitive impacted specimen, a tensile strength decrease of about 65 % was observed. And the elongation was reduced by 10 % due to the cyclic harding behavior of the material.

• Journal of the Korean Society for Heat Treatment
• /
• v.25 no.5
• /
• pp.233-238
• /
• 2012

The effect of subzero treatment on the mechanical properties of cold rolled high manganese austenitic stainless steel was investagated. ${\alpha}$'-martensite was formed by cold rolling, and it was formed with surface relief and specific direction or crossing each other. The volume fraction of martensite increased by subzero treatment, and it was increased with longer time of subzero treatment and higher temperature of subzero treatment. The hardness and strength increased by subzero treatment, while the elongation decreased. With the increase of volume fraction of martensite, the hardness and strength was increased steeply with proportional relationship, elongation was decreased slowly. The results show that the hardness and strength was strongly controlled by the volume fraction of martensite, and the elongation was affected by transformation behavior of deformation induced martensite in the initial stage of deformation.

• Fashion & Textile Research Journal
• /
• v.10 no.2
• /
• pp.236-241
• /
• 2008

Hair manicure is usually and widely operated in the area of hair-dyeing by the reason that acidic hair color is less damaged and more stable than other chemical color treatment. However, there is no an in-depth study to prove them. This study purposes to provide basic resources for effectively using products of hair manicure by experiments on Physical Properties of Hair. Hair of one healthy woman in mid-20's, Level 4, was sampled for experiments. For the tests, hair samples were classified by the frequency of hair manicure treatment The control group(a), once treatment(b), twice(c), three times(d), four times(e) and five times(f). The results were measured with Scanning Electron Microscopy(SEM) and Tensile Strength and Elongation test. The lower Values of Tensile Strength according to repeated hair manicure treatment. Elongation is not affected by the frequency of hair manicure treatment. There was no remarkable change of hair surface in once(b) and twice(c) treatment. The change of hair surface which was able to judge by cuticle layers looseness, tunics and the transformation of cuticle cell were observed in the hair samples operating more than three times(d) of hair manicure treatment.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.3
• /
• pp.11-20
• /
• 2011

The conditions to which pulp fibers are exposed during paper production, converting, storage, use, and recycling can induce various changes in fiber morphology, surface characteristics, and suitability for paper production by recycled fibers. Most of those changes can be described by hornification. Paper has highly hygroscopic properties which affect dimensional change by relative humidity variation of surrounding condition. The purpose of this study was to investigate the dimensional stability, moisture contents and dip elongation of handsheets at different relative humidity conditions of recycled kraft pulp and BCTMP. By using recycled fibers, dimensional stability was increased because hygroscopic properties of fibers decreased with repeated recycling treatment. Dip elongation of recycled pulp was higher than that of virgin pulp because of its weak fiber-to-fiber bonding. By recycling pulp, the relative bonded area was decreased because fiber could not swell more than virgin pulp. Dimensional stability largely depended on the equilibrium moisture contents of paper, the fiber-to-fiber bonding strength, and the relative bonded area.

• Journal of the Korean Society for Heat Treatment
• /
• v.12 no.3
• /
• pp.231-239
• /
• 1999

Volume fraction and morphology of retained austenite, tensile properties of TRIP type high strength steel sheet with Fe-C-Si-Mn-Cu chemical composition have been investigated. The retained austenite of granular, bar and film type existing in specimen was obtained after intercritical annealing and austempering. The granular type retained austenite increased with increase of intercritical annealing and austempering temperature. With increase of intercritical annealing temperature, retained austenite and carbon contents increased. Maximum contents of retained austenite was obtained by austempering at $400^{\circ}C$. The maximum tensile strength was obtained by austempering at $450^{\circ}C$ and maximum elongation was obtained at $400^{\circ}C$. T.S${\times}$E.L value increased with increase of retained austenite contents due to the elongation strongly controlled by contents of retained austenite, but tensile strength was affected with various factors such as bainitic structure etc.

• Journal of the Korean Society for Heat Treatment
• /
• v.24 no.5
• /
• pp.271-276
• /
• 2011

The effect of grain size on the deformation induced martensite transformation and mechanical properties in austenitic stainless steel with high amount of Mn was studied. a'-martensite was formed by deformation and deformation induced martensite was formed with surface relief. With increase of grain size, volume fraction of deformation induced martensite was increased. With the increase in degree of cold rolling, hardness, and tensile strength was rapidly increased with linear relationship, while, elongation was decreased rapidly and then decreased slowly. With increase of grain size, hardness and tensile strength was rapidly increased with linear relationship, while elongation was decreased rapidly. The hardness, tensile strengths, and elongation were more strongly influenced by deformation induced martensite than the grain size.

• Journal of Korea Foundry Society
• /
• v.17 no.3
• /
• pp.286-291
• /
• 1997

Influence of Si contents on the mechanical properties and microstructure of austempered ductile iron was investigated. Four different Si contents between 2.0 and 2.9% were used. Austenitizing was performed at $890^{\circ}C$ for 2 hrs and austempering temperatures were both 340 and $380^{\circ}C$ for 0.5, 1, and 2 hrs. Nodule content was more than $300/mm^2$ and nodularity was more than 90%. Microstructure was revealed using nital and retained austenite was measured by x-ray diffractometer. Tensile test, no-notch Charpy impact test and wear test were performed. Tensile strength was improved as Si content increased and both elongation and impact toughness had peak at 2.6%Si. The specimen austempered at $380^{\circ}C$ showed lower tensile strength than that of $340^{\circ}C$, but showed higher elongation. However, austempering temperature of $380^{\circ}C$ was desirable because that of $340^{\circ}C$ was close to lower bainite transformation. As austempering time increased, tensile strength and elongation were improved and optimum condition was obtained for 2 hrs heat treatment.

• Journal of the Korean institute of surface engineering
• /
• v.43 no.2
• /
• pp.57-63
• /
• 2010

In this study, thermal stability of the mechanical properties of Ni-P-B and Ni-P-Fe layers electroplated on Alloy 600 material was evaluated by measuring their microhardness, tensile strength, and elongation after heat treatment at $325^{\circ}C$ and $400^{\circ}C$. According to the results, there was no noticeable change in microhardness of the two electrodeposits before and after heat treatment at the temperatures for 30 days. In the case of a Ni-P-B electrodeposit, ultimate tensile strength (UTS) slightly increases with heat treatment time, while its elongation decreases, showing good thermal stability in the mechanical properties at high temperature. On the other hand, UTS and elongation of Ni-P-Fe decrease with heat treatment time, which is very unusual observation. This result was attributed to the bad microstructure of Ni-P-Fe having many defects in the deposit formed early stage of an electroplating process and their redistribution to link to become large ones during heat treatment.

• Journal of the Korean Society for Heat Treatment
• /
• v.34 no.3
• /
• pp.116-121
• /
• 2021

This study was carried out to investigate the effect of transformation induced martensite on the tensile properties of Fe-20Mn-12Cr-3Ni-3Si alloy. α' and ε-martensite were formed by cold rolling, and these martensite were formed with according to the specific direction, surface relief and partially intersection. With an increasing degree of cold rolling, amount of α'-martensite was slowly increased, whereas amount of ε-martensite was rapidly increased. Volume fraction of ε-martensite formed by cold working was large than α'-martensite. Tensile strength was rapidly increase and elongation was rapidly decreased with an increasing of degree of cold rolling. This means that tensile strengh and elongation was greatly influenced by the volume fraction of ε-martensite formed by cold rolling then α'-martensite.

• Journal of the Korean Ceramic Society
• /
• v.29 no.8
• /
• pp.593-600
• /
• 1992

Through sol-gel processing, Inorganic-organic composite was obtained. The influence of water content used in hydrolysis on the bonding state, microstructure, strength, and elongation into IR, NMR, Tg, etc. As the water content was increased, the bonds between inorganic Si-(OH) and organic Si-(OH) increased, and relatively denser microstructure was formed. Tensile strength and elongation decreased with amount of water content.