• Korean Journal of Environmental Agriculture
• /
• v.11 no.1
• /
• pp.41-49
• /
• 1992

To determine the efficacy of uniconzaole[(E)-1-(4-chlorophenyl)-4,4-dimethy 2-(1,2,4-triazol-1-yl)-1-penten-3-ol)](XE-1019) as a phytoprotectant against $O_3$ injury in tomato plants(Lycopersicon esculentum Mill. 'Pink Glory'), plants were given a 50ml soil drench of uniconazole solution at concentrations of 0.001, 0,01, 0.1 and 0.2mg/pot thirteen days prior to $O_3$ fumigation. All four uniconazole concentrations were effective in providing protection against $O_3$ exposure(16h at 0.3 ppm). Uniconazole treatment above 0.001 mg/pot significantly reduced stem elongation, leaf enlargement, leaf area and fresh weight of plant, whereas increased chlorophyll concentration. Transpiration rate on a whole plant basis was reduced by uniconazole treatment and $O_3$ exposure. Uniconazole reduced ethylene production induced by $O_3$ injury but had little or no effect on defoliation of cotyledons and leaf epinasty. Activities of peroxidase (POD) and superoxide dismutase(SOD) were slightly increased by application of uniconazole. With increasing exposure time, $O_3$ increased POD activity but decreased SOD activity. The phytoprotective effects of uniconazole were diminished by applying gibberellin at $10{\sim}20$ ppm. These results suggest that the phytoprotective effects of uniconazole are related to its role of increasing activities of free radical scavengers such as POD and SOD, in addition to growth-retardation as an anti-gibberellin.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.1 s.34
• /
• pp.47-52
• /
• 2005

Worldwide movement for prohibition of Pb usage drives imminent implementation of Pb-free solders in microelectronic packaging industry. Reliability information of Pb-free solders has not been completely constructed yet. One of the potential reliability concerns of Pb-free solders is allotropic transformation of Sn known as tin pest. Volume increase during the formation of tin pest could deteriorate the reliability of solder joints. It was also reported that the addition of soluble elements (i.e. Pb, Bi, and Sb) into Sn can effectively suppress the tin pest. However, the mechanical properties of the tin pest resistant alloys have not been studied in detail. In this study, lap shear creep test was conducted with Sn and Sn-0.7Cu based solder alloys doped with minor amount of Bi or Sb. Shear strain rates of the alloy were generally higher than those of Sn-3.5Ag based alloys. Rupture strains and corresponding Monkman- Grant products were largest for Sn-0.5Bi alloy and smallest for Sn-0.7Cu-0.5Sb alloy. Rupture surface Sn-0.5Bi alloy showed highly elongated $\beta$-Sn globules necked to rupture by shear stresses, while elongation of $\beta$-Sn globules of Sn-0.7Cu-0.5Sb alloy was relatively smaller.

• Korean Journal of Weed Science
• /
• v.9 no.1
• /
• pp.28-33
• /
• 1989

This study was examined for the effect of tuber size, bud and tuber removal, and tuber cutting on growth of Eleockaris kuroguwai Ohwi. Elongation of plumule and radicle, and the weights of tuber, rhizome and shoot were increased as tuber size is large. The weights of shoot and tuber reduced by bud planting without tuber at 15 days after budding, however number of tubers were increased compared with normal tuber. When cross-cutting tubers were seeded, the weights of shoot, rhizome and tuber were produced as 84%, 85%, 71%, respectively compared with normal tuber, and the number of tubers was not influenced. The weights of tuber, rhizome and shoot were lowed as the bud removal, and there were a great number of tubers at bud removal of 15 days after budding. Tuber of E. k, contained as nonfibrous 78.9gr, phosphorous 77mg, iron 16.8mg, niacin 1.3mg per 100gr edble portion. The positive correlations were observed between shoot weight and tuber weight, and number of tubers.

• The Korean Journal of Quaternary Research
• /
• v.18 no.2 s.23
• /
• pp.1-2
• /
• 2004

The Ilkwang Fault is NNE-striking, elongated 40 Km between Ulsan and Haendae-ku, Busan in southeastem part of the Korean Peninsula(Kim, D.H. et al., 1989; Kim, J.S. et al., 2003). This paper is mainly concemed about the ages of the fault activities especially in the Quatemary, infered from classification of geomorphic surface and trench excavation for the construction of Singori nuclear power plant. The geomorphi surfaces are classified into the Beach and the Alluvial plain, the 10 m a.s.l. Marine terrace, the 20 m a.s.l. Marine terrace, the Reworked surface of 45 m a.s.l. Marine terrace and the Low relief erosional surface, from lower to higher altitude. The Beach and the Alluvial plain are elongated to the Holocene terrace(ist terrace, choi, 2003). The 10 m a.s.l. Marine terrace is correlated to 2nd terrace (MIS 5em 125 Ka. y. B.P., Choi, 1998). The 45 m a.s.l. Marine terace is correlated to the Lower marine terrace (MIS 7,220 Ka. y. B.P., Choi, 2003 or MIS 9,320 y. B.P.) to the Gwanganri terrace(Penultimate interglacial age, 200-200 Ka. Y. B.P., Oh, 1981). The Low relief erosional surface is distributed coastal side, the Reworked surface of 45 m a.s.l. Marine terrace inland side by the Ilkwang Fault Line as the boundary line. But the former is above 10 m higher in relative height than the latter. The 20 m a.s.l. Marine terrace on the elongation line of the Ilkwang Fault reveals no dislocation. A site was trenched on the straight contract line with $N30^{\circ}$ E-striking between the 10 m a.s.l. Marine terrace and the 20 m a.s.l. Marine terrace. Fault line or dislocation was not observable in the trench excavation. Accordingly, the straight contact line is inferred as the ancient shoreline of the 10 m a.s.l. Marine terrace. The Ages of the Fault activities are inferred after the formation of the Ichonri Formation - before the formation of the 45 m a.s.l. Marine terrace (220 Ka. y. B.P. or 320 Ka. y. B.P.). The Low relief erosional surface was an island above the sea-level during the formation of the 45 m a.s.l. Marine terrace in the paleogeography.

• Food Science and Preservation
• /
• v.17 no.2
• /
• pp.196-201
• /
• 2010

Gelatin films containing grapefruit seed extract (GSE) were prepared by incorporating different amounts (0, 0.6, and 1.0%, w/v) of GSE into film-forming solutions. Film elongation was improved by the addition of GSE, but film tensile strength decreased to 31.96 MPa for film containing 1.0% GSE, compared with 46.39 MPa for the control. Incorporation of 1.0% GSE inhibited the growth of pathogenic bacteria such as Escherichia coli O157:H7 and Listeria monocytogenes. Packaging of strawberries with a gelatin film containing 1.0% GSE decreased the levels of total aerobic bacteria and yeast/molds after 12 days of storage by 1.60 and 1.43 log CFU/g, respectively, compared with control values. Sensory evaluation results indicated that packaging of strawberries with GSE-gelatin film resulted in better sensory scores than those of the control. These results indicate that strawberries can be packaged using gelatin film containing GSE, to extend shelf-life.

• Elastomers and Composites
• /
• v.43 no.1
• /
• pp.39-48
• /
• 2008

Peel strength of epoxy adhesives can be increased by adding some amounts of XNBR. In this case, thermal resistance of the adhesive will be decreased by decrease of glass transition temperature of the adhesive. Epoxy resin modified with siloxane-imide was synthesized to improve thermal resistance and peel strength of the adhesive, after that the properties of modified epoxy resin were compared with the commercial epoxy resin. When 5% XNBR was added to 30% modified epoxy resin, this adhesive showed 0.42 N/mm of peel strength and $155^{\circ}C$ of glass transition temperature. These properties are enough compared to the required properties by the industry, i.e., 0.3 N/mm and $150^{\circ}C$, respectively. Weight loss of the modified epoxy resin by the treatment of nitric acid and 0.1N NaOH was reduced, but weight gain by the humid condition was increased by the presence of benzene ring and imide ring. 30% modified epoxy resin blended with 5% XNBR showed 220% improvement in tensile strength and elongation compared to the case of common epoxy resin. This is due to the flexibility of the siloxane in the modified epoxy resin.

• Journal of Applied Biological Chemistry
• /
• v.58 no.2
• /
• pp.145-151
• /
• 2015

Corn fiber protein (CFP) was extracted from corn wet-milling by-product, corn fiber. CFP films containing various plasticizers and cross-linking agents were prepared and their mechanical properties were determined. Among the plasticizers and cross-linking agents used in this study, the CFP film containing 2 g fructose and 0.03% cinnamaldehyde had the most appropriate physical property. In addition, the CFP films containing green tea extract (GTE) were prepared by incorporating different amounts (0, 0.5, 1.0, 1.5%) of GTE into the film-forming solution. Tensile strength, film solubility, and opacity of the CFP films increased with the addition of GTE, whereas elongation and water vapor permeability of the CFP/GTE films decreased compared to those of the control. The antioxidant activity of the CFP/GTE film was determined in terms of 2,2-diphenyl-1-picrylhydrazyl radical scavenging activity. As a result, antioxidant activity of the films increased with increasing GTE concentration. Furthermore, antimicrobial activity against Escherichia coli O157:H7, Listeria monocytogenes, and Staphylococcus aureus increased with increasing GTE concentration. These results indicate that the incorporation of GTE could enhance antioxidant and antimicrobial activities of the CFP films.

• The Korean Journal of Quaternary Research
• /
• v.18 no.1 s.22
• /
• pp.21-30
• /
• 2004

The Ilgwang Fault is NNE-striking, elongated 40 Km between Ulsan and Haeundae-ku, Busan in southeastern part of the Korean Peninsula. This paper si mainly concerned about the ages of the fault activities especially in the Quaternary, inferred from classification of geomorphic surfaces and trench excavation for the construction of Singori nuclear power plant. The geomorphic surfaces are classified into Beach and the Alluvial plain, the 10 m a.s.l. Marine terrace(MIS 5a), the 20 m a.s.l. Marine terrace(MIS 5e), the Reworked surface of 45 m a.s.l. Marine terrace(MIS 7 or 9) and the Low relief erosional surface. The Low relief erosional surface is distributed coastal side, the Reworked surface of 45m a.s.l. Marine terrace inland side by the Ilgwang Fault Line as the boundary line. But the former is above 10 m higher in relative height than the latter. The 20 m a.s.l. Marine terrace on the elongation line of the Ilgwang Fault reveals no dislocation. A site was trenched on the straight contact line with $N30^{\circ}E$-striking between the 10 m a.s.l. Marine terrace and the 20 m a.s.l. Marine terrace. Fault line or dislocation was not observable in the trench excavation. Accordingly, the straight contact line is inferred as the ancient shore line of the 10 m a.s.l. Marine terrace. The Ages of the Fault activities are inferred after the formation of the Ichonri formation - before the formation of the 45 m a.s.l. Marine terrace(220 Ka. y. B.P. or 320. Ka. y. B.P.). The Low relief erosional surface was an island above the sea-level during the formation of the 45 m a.s.l. marine terrace in the paleogeography.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.25 no.1
• /
• pp.1-7
• /
• 1980

In 1976, a newly released rice variety, Yushin, was planted in 300,000 ha of the 533,000 ha of cultivated total hecterage with new rice varieties. High productivity and quality were achieved by farmers around country. However, the wilting phenomena of Yushin occured in some regions where were employed poor cultural management, and flowed sewage into the paddy field from industrial factories. This study was identified some factors for the wilting phenomena of Yushin rice variety in morphological and physiological aspects. The Yushin variety showed greater internode elongation on low part of the stems that close related to lodge at heavier nitrogen levels, excessive number of spikelets per unit leaf blade weight i.e. higher sink/source ratio, and greater consumption of respiratory substrate by increased respiration rate of rice plant as compared with those of Tongil rice variety. In physilogical aspects, the Yushin variety was significantly declined root development and root activities under heavy nitrogen conditions. Yushin rice variety was decreased $K_2$O/N ratio, carbohydrate content in stem of rice plant, and physiological root activities specially in low light intensity, 50% light interception plots. Therefore, above factors were mainly promoted the wilting phenomena of Yushin rice variety.

• Journal of the Korean Society for Heat Treatment
• /
• v.5 no.1
• /
• pp.41-49
• /
• 1992

The effects of alloying elements on the superplastic properties of Al-Li based alloys had been investigated. The intermediate thermo-mechanical treated (ITMT) Al-2.0wt%Li, Al-2.0wt%Li-1.0wt%Mg, Al-2.0wt%Li-0.12wt%Zr and Al-2.0wt%Li-1.2wt%Cu-1.0wt%Mg-0.12wt%Zr alloys were tested in tension at various temperature (400, 450, 500 and $550^{\circ}C$) and strain rate($6.7{\times}10^{-3}$, $1.0{\times}10^{-2}$, $1.6{\times}10^{-2}$ and $5.0{\times}10^{-2}/sec$). The results were as follows : The superplasticity in binary, ternary and pentanary alloys appeared at 500 to $550^{\circ}C$, and good strain rate for superplasticity. $1.6{\times}10^{-2}/sec{\sim}1.0{\times}10^{-2}/sec$ for a binary alloy and $1.0{\times}10^{-2}/sec{\sim}6.7{\times}10^{-3}/sec$ for ternary and pentanary alloys. A Zr-added ternary alloy had best value of elongation (730%) in four alloys at $550^{\circ}C$ of tension temperature and $1.0{\times}10^{-2}/sec$ of strain rate. The strain rate was greatly dependent on tension temperature and true strain rate was more than 1.0 at all test temperature and strain rate. In binary and Mg-added teranry alloys. the necks were slightly formed and their fracture surface had lips shape, but Zr-added ternary and pentanary alloy fractured along the grain boundary without necking. Their dislocations moved to grain boundary during superplasticity deformation and arranged perpendicular to grain boundary. Super plastic deformation was made by grain boundary slip of dislocation slip creep and model of core and mantle.